Just fixed my 3 years old Killburn II, had the same issue. Just unplugged, used eraser, plugged in, and everything ok. Thank you very much, you saved me 50 Euros, or dont know how much would they take in some repair shop for this.
@@ARTaudio440 my kilburn 2 battery not working now i have 4 lithium ion cells 3.7 volt 2200mh each how i can connect them with each other and with bms of kilburn 2 ... please help me
@@ARTaudio440 actually its one cell was dead so i dismantle all 4 cell and checked them with multimeter so i found one faulty .. which i replaced with new one now i forget the contention details
Wow thank you so much. Got it for my birthday in another country and the store would no longer answer only had it about 3 weeks and boom no power. But for me it happened to be the conductor in the red black connection from power input to board. It corroded. So I cleaned it off best I could kind of a tight spot and boom power.
I went straight to step three. If you had a way that I could shoot you 20 bucks for this information, I would. It’s up and running chief. I didn’t have an eraser I just use my fingernail.
@@ARTaudio440 My Friend, 5 months after having my speaker repaired, now I have a problem in the command circuit, the power button is in continuity, so the speaker is always on and cannot be adjusted. Any help to repair this and also to remove that circuit without damaging it? Thank you!
Ok, I am an electronics student on my own. I would like to be able to repair it myself. As I told you, I already diagnosed it, the problem is that it is difficult for me to remove the command circuit where the volume is. I just would like to know if you have any technique or am I really forced to unsolder the 3 potentiometers to have the circuit? Thank you@@ARTaudio440
Hey thanks for the Video. I only have 7.4 Volts on my Power Switch Pins. Any idea if thats the problem and how to fix that? Thanks in advance for any tips.
Bought mine within the past year but wont turn on. Should i do the same thing you did in this video? Or should i go to the store and have my Kilburn 2 repaired by them?
I try tried to measure volt on the to pins with my CAT III measuring pens, and I think I might’ve burnt the blue thingy. The battery display lights flickered when I did it… What do you suggest?
Hi and thanks for the video, I have an issue on my killburn 2 and i can't find the reason why. When the sound and especially the bass are too loud the sound shut down for ~2/3 sec and the litle red light near the Bluetooth button shut down as well. The battery lights stays on tho and when the sound comes back the music is still going as it haven't been shut. Could you please help me if you have an idea of what may cause this issue ?🙏
Hi, thank you for watching ☺️ This model has a sensitivity in the auxiliary jack, once you touch this auxiliary or any little movement will cut the audio. My advice is please check this board where this jack is connected and make sure no loose screws or broken parts.
Hi, you can see it at the back side , it is the same as the 3.5mm headphone jack. Try to observe inserting in and out any 3.5 jack to this auxiliary jack.
i checked the cable that you demonstrated, it was loose and has bent pins on the end points of it, tried to unbent them and plugged it in, one of the pins were still in contact with each other causing a short to the control knob circuit, the bluetooth light remains constantly on and some of the light diodes are burnt. oh well it doesnt work
Hi, sad to hear that. Possible the volume knob switch is still in the On position when you insert the cable or the cable alignment and lines are so bad.
I have confirmed that the chip resistor & capacitor attached near the power switch is corroded, but to replace it I need to know the specs of the part. Can you provide relevant materials?
Hi, if there is a loose connection maybe... but this amp has a sensitive auxiliary input detection, when the auxiliary jack is loose or the board is loose, the sound stops.
Hi, thanks for watching ☺️ Try searching online in your local area, get how many pins or just physically check the markings on the flat cable and search it online.
Hi please help My speaker is not charging anymore it is not showing any secondary voltage maybe the transformer is burnt. Can I buy a separate 220v to 18v dc charger to charge the battery.
My speaker is not working and light on top does not appear ….. the light only appears when i connect it to cable but it does not turn on … is there any solution?
@damanjot123 Hi, sorry because I can't help you with this cable. I would suggest bringing the amp to an authorized service center. For me, it requires deep troubleshooting with your amp.
Thank you Allan. This worked for me and you saved me alot of stress and heartache
Hi, welcome and thank you too for watching ☺️
You saved my marshall, i don’t have a service center in india, thanks for the video ❤❤ ❤
Hi, you're welcome and thank you too for watching ☺️
Just fixed my 3 years old Killburn II, had the same issue. Just unplugged, used eraser, plugged in, and everything ok. Thank you very much, you saved me 50 Euros, or dont know how much would they take in some repair shop for this.
@@MARTY22222222 Great! Thank you for watching ☺️
@@ARTaudio440 my kilburn 2 battery not working now i have 4 lithium ion cells 3.7 volt 2200mh each how i can connect them with each other and with bms of kilburn 2 ... please help me
@@DilpreetSingh-pe8is Hi, just dismantle the original battery packed and follow the connections.
@@ARTaudio440 i dismantle it and now i forgot how was it is connected
@@ARTaudio440 actually its one cell was dead so i dismantle all 4 cell and checked them with multimeter so i found one faulty .. which i replaced with new one now i forget the contention details
I also had a loose cable, fixed it with some pattafix. Thanks to you, my speaker is working fine again❤
Hi, you're welcome and thank you too for watching! ☺️
Thanx a million! Finally my speaker is rescued
Hi, thank you for watching ☺️
You save my Marshall man! Respect for you video intruction. 🎉🎉
@@Realbadlap Great! Thanks for watching ☺️
THX Buddy, mine is not even 1.5 years old and already carried some damage in battle, but we where able to clean and repair it once again!
Hi, you're welcome and thank you too for watching ☺️
Thank you very much. I did it step by step with your video and it’s working again! 🙂👍
You're welcome!
Thank you for watching ☺️
Wow thank you so much. Got it for my birthday in another country and the store would no longer answer only had it about 3 weeks and boom no power. But for me it happened to be the conductor in the red black connection from power input to board. It corroded. So I cleaned it off best I could kind of a tight spot and boom power.
Hi, thank you for watching ☺️
Thank you so much. I did it easy with your video and she's singing again 😁
Hi, thank you for watching! ☺️
Thanks for the tip. I had the same issue and fix it. Good turorial🎉
Hi, thank you for watching ☺️
Arreglado! A la primera vez que lo intente no revivió. Pero le di un poco más con la goma al cable azul y funciona.
Muy fácil.
Great!
Thank you for sharing your experience and for watching 🙏
Thanks a lot… finally it’s working kuddos to u…
Hi, you're welcome and thank you too for watching ☺️
Thank you so much :) Helped a lot!! :)
Hi, thank you for watching ☺️
thx brother, it works so well.. it save my kilburn II
Hi brother, thank you for watching ☺️
You save my Marshall - Thanks
Hi, thank you too for watching ☺️
Thanks a lot! Good luck at work!
Hi, thank you for watching ☺️
I went straight to step three. If you had a way that I could shoot you 20 bucks for this information, I would. It’s up and running chief. I didn’t have an eraser I just use my fingernail.
Oh great! thank you sir🙏
This same thing happened to me. Thanks a lot!
Hi, thank you for watching ☺️
We can dance agaiiin. Thank youuuu!!! 🤩
@@7eMZee Great 😃
Thank you for watching ☺️
thank you so much!!!!
Hi, welcome!☺️
Thanks for watching 🙏
thanks bro!!!
Hi, thank you for watching ☺️
Thank you!!!! 👍
Hi, thank you for watching ☺️
Hi, great video.
I have a question: If after many years of use the battery is dead, can this speaker still be used plugged in?
Hi,
It's a good question that I can't answer yet, if I have a chance it will be shared here. Thank you for watching ☺️
Thank you bro!!
Hi, thank you for watching 🙏
@@ARTaudio440 My Friend, 5 months after having my speaker repaired, now I have a problem in the command circuit, the power button is in continuity, so the speaker is always on and cannot be adjusted. Any help to repair this and also to remove that circuit without damaging it? Thank you!
Hi, I think it requires a deep troubleshooting in your speaker so I suggest to bring it to your nearest authorized service center.
Ok, I am an electronics student on my own. I would like to be able to repair it myself. As I told you, I already diagnosed it, the problem is that it is difficult for me to remove the command circuit where the volume is. I just would like to know if you have any technique or am I really forced to unsolder the 3 potentiometers to have the circuit? Thank you@@ARTaudio440
Hi, I don't have any idea yet removing the control board, try to see if there is a nut on its control, you must remove the knob to see it.
Hey thanks for the Video. I only have 7.4 Volts on my Power Switch Pins. Any idea if thats the problem and how to fix that? Thanks in advance for any tips.
Hi, please confirm if you can get 18 volts on the main supply, if yes, you have a bad contact on that flat cable.
Bought mine within the past year but wont turn on. Should i do the same thing you did in this video? Or should i go to the store and have my Kilburn 2 repaired by them?
Hi, thank you for watching ☺️
I would suggest bringing it to an authorized service center to avoid any additional damage to your speaker.
I try tried to measure volt on the to pins with my CAT III measuring pens, and I think I might’ve burnt the blue thingy.
The battery display lights flickered when I did it…
What do you suggest?
Hi sir,
I would suggest to bring it to the authorized service center nearest to you. It requires deep trouble shooting.
@@ARTaudio440 I will do that ! Thank you very much ^^
Hi and thanks for the video, I have an issue on my killburn 2 and i can't find the reason why. When the sound and especially the bass are too loud the sound shut down for ~2/3 sec and the litle red light near the Bluetooth button shut down as well. The battery lights stays on tho and when the sound comes back the music is still going as it haven't been shut. Could you please help me if you have an idea of what may cause this issue ?🙏
Hi, thank you for watching ☺️
This model has a sensitivity in the auxiliary jack, once you touch this auxiliary or any little movement will cut the audio. My advice is please check this board where this jack is connected and make sure no loose screws or broken parts.
Hi, you can see it at the back side , it is the same as the 3.5mm headphone jack. Try to observe inserting in and out any 3.5 jack to this auxiliary jack.
@@Archive667 Hi, yes you can apply a glue or epoxy.
Hi there
I got a problem where light on the top wouldn’t turn of and doesn’t really change after turning it on or off. The speaker is also not working
Hi, check that cable, maybe it is misaligned.
i checked the cable that you demonstrated, it was loose and has bent pins on the end points of it, tried to unbent them and plugged it in, one of the pins were still in contact with each other causing a short to the control knob circuit, the bluetooth light remains constantly on and some of the light diodes are burnt. oh well it doesnt work
Hi, sad to hear that. Possible the volume knob switch is still in the On position when you insert the cable or the cable alignment and lines are so bad.
I have confirmed that the chip resistor & capacitor attached near the power switch is corroded, but to replace it I need to know the specs of the part. Can you provide relevant materials?
Hi, I will check this if I have a chance. Thank you for watching ☺️
I have this reproduct. When I switch songs, it disconnects and connect again to Bluetoth. Does it do that to you?
Hi, if there is a loose connection maybe... but this amp has a sensitive auxiliary input detection, when the auxiliary jack is loose or the board is loose, the sound stops.
Arreglado, gracias! Era el cable azul. 5 minutos y 0 euros de coste
Hola, gracias por mirar.
My speaker is not working even if put the power cord its not charging. Do i need to send it to the workshop?
Hi, thank you for watching ☺️
Yes I suggest sending it to an authorized service center. Probably the power supply is faulty.
Hello, my blue strap is broken and where did I buy it? really sad
Hi, thanks for watching ☺️
Try searching online in your local area, get how many pins or just physically check the markings on the flat cable and search it online.
How do you know it bro u just saved my speaker
Hi, thank you for watching ☺️
Hi please help
My speaker is not charging anymore it is not showing any secondary voltage maybe the transformer is burnt.
Can I buy a separate 220v to 18v dc charger to charge the battery.
Hi, thank you for watching ☺️
Yes you can buy SMPS but I suggest to let check your speaker with a technician. Maybe it can be fixed.
@@ARTaudio440 thanks alot of the reply I donot have a technition or service center her at my place, can I use a laptop charger directly instead
@@AnantaRai-uz6ui Hi, laptop charger is ok to use, just make sure the polarity is correct.
The same just happen to mine its seems like all amps are breaking down. I didnt buy it new nor will i ever buy a marshall amp.
Hi, thank you for watching ☺️
This didnt fix the problem i wonder if my powercord is good
Need to check the battery and the power supply
My speaker is not working and light on top does not appear ….. the light only appears when i connect it to cable but it does not turn on … is there any solution?
Hi, thank you for watching ☺️
Please check the flat cable alignment. Some cases are just loose connections. Chack also the rotary switch continuity.
No i did it 2 times but it is not working
Must confirm if there is a + volts supply running on the switch 2:14. You need an analog or digital tester to figure it out.
From where i can buy flat cable alignment?
@damanjot123 Hi, sorry because I can't help you with this cable. I would suggest bringing the amp to an authorized service center. For me, it requires deep troubleshooting with your amp.
try resetting it... might save you from opening the speaker.
Hi, thank you for watching and for the advice☺️
Hi San Po location nyo ?
Hi, kasalukuyang nasa Qatar po ako ngayon. Thank you for watching ☺️
FCK, I can't hear the video cox my speaker is not turning on.
UPDT i used my airpod, but learned that he is not speaking. but great video thanks. 🤣🤙
Hi, thank you for watching 😅
The video has only animated text, sorry for that.
@@Nazwan-r7r Hi, thank you for watching 😅
The video has only animated text, sorry for that.
It doesnt work on mine 🥹
Hi, thank you for watching ☺️
I suggest bringing your speaker to a qualified technician for troubleshooting.