Sir my respect, you have left me speechless, I only can say you are amazing!. Thank you for sharing your immense knowledge and experience. I am very grateful, Thank you very much!.
Thanks for this excellent tutorial. I purchased the display and downloaded your project. I'm using platformIO so I made the necessary tweaks to get it to compile. At first I had issues with it only displaying the orange screen. I finally got it to work by adding the line: img.setColorDepth(8); right before img.createSprite(240, 240); It seems to be working fine now but I'm not sure why I needed to do that? The image file is using 16 bits per pixel it seems. Color looks right though. Anyway, a heads up if someone else is running into trouble. Thanks again!
@Wolfe032 thank you for the solution. I had the same problem and spent my time to check settings in libs. I had 7 pin version of the round display- without lcd underlight pin. Did you find the explanation the problem? Have you tried any different libraries?
I had the same results with this code and the Volos's Smart watch code using the Arduino IDE and PlatformIO. Your img.setColorDepth(8) worked here but not on the Smart Watch. I pre-calculated all the static arrays in the setup loop and stored them in program memory freeing 6K of ram in this code and 9K in the Smart Watch. Both work afterwards. I'm guessing that a large sprite requires a lot of ram.
Thank you for fix. I have been tearing my few remaining strands of hair trying to understand why I had an orange/yellow display. @Volos - would you please consider updating the code or adding a text comment to the repository?
Great video! :) Not stellar walkthrough of the code, but it does not matter! You covered how things work and saved anyone who want to use the display a lot of time! So thank you so much! :D
Great video and project. 👍Like Wolfe032 mentioned in a previous post, I had to add the line: img.setColorDepth(8); right before img.createSprite(240, 240); in the setup routine to get it to work for me. Now I'll have to figure out how to use different input pins for each separate gauge.
That was a great demo, you absolutely do not need to apologize for anything. Thanks for sharing. If you ever get a chance to work with the ZX2D10GE01R-V4848 round display, I'd love to see your ideas.
An extra tip; If you're using only one SPI device, you can connect RST to VCC(or NRST), and CS to GND. That's the easiest(less wires) way to connect a display, requiring only 3 wires and power. You'd only need to connect CS to an I/O pin if you're sharing the SPI bus.
Sorry if I missed this in the video, how does the pixel layout work? is it like a square but only the existing pixels get displayed? or do you need to structure your data array with each line being progressively longer as you approach the equator and then shorter as you approach the bottom?
I have one of those cheap Chinese smart watches that broke. I'm going to try your code on the screen. It's a round screen and I have some great ideas for it if I can use it. Thanks for the ideas in the code.
I've always wanted to do a watch project, I think this display might just do the trick. I'd love to make it self-contained, but I couldn't use a full-blown ESP32 demo board, I'd have to use something much smaller. I didn't even know these displays existed, so props for that!
I just get an orange display, the arduino examples for the TFT library work fine, I am not clever enough to know why it does not work, I have connected the inputs switch and pot to ground, but really interesting project.
@@VolosProjects i have a question is that possible to use two of this display alltogether displaying the same image using the same connection pin from ESP. I mean both display connected into the same ESP pin
I tried your code and at first I couldn't get it to work. All I got was an orange screen (TFT_ORANGE). After an hour of debugging I think my ESP32 was getting out of memory by the while(a!=44) loop. I then enabled the PSRAM on my board and it started working (although with a lot of flicker, but stil it works). So it's possible this won't work on boards without PSRAM. Great video!
Yes, very impressive display, layout and response time. The TFT_eSPI examples also give some guidance on the coding approach. The details for working with sprites isnt easy, but looks like it is worth persevering to get best performance.
nicei work. I recommend something to cover the screen from sunlight, I've done a similar project before but facing with sunlight and display brightness is a pain on the neck. I cant saw most of the details I put effort on HMI. so I think the best always is custom 7 segment dashes, you can always make them enought bright to see it at daylight.
really nice video and application, i'd like to try similar on my Vespa monitoring, will be possible to have some more expleination of how connect sensors? thanks again
Thanks for all your videos, if I want to get started with ESP32 programming, which one would you advise me to buy please, I saw that the ESP32 C6 I think was the model, but I didn't understand some people say there aren't enough compatible libraries?
My IDE kept throwing up a serial comms error when trying to upload unless I unplugged the display. I suspect it's a serial comms pin use thing like Rx0 and TX0 on Arduinos.
Hello, I am trying to use this sketch. Unfortunately the image and the pointer is not displayed. I use a round display with GC9A01 driver without LED and a ESP32 -WROMM 32 controller . Is there a newer version of this sketch ?? Greetings
Very good. One question: all gauges include files (.h) are arrays of the converted images. Any chance to have the original images so we can modify them?
Hi guys! Im loving your work! im trying to make myself a gauge following your code etc, but i cant figure out how to adjust what the display shows/the input from pin 14? I'm still new to coding and i'd love some help please!
How are images like this gauge even made? I don’t even know what it call an image like that to look it up, lol I’m new to this but I learn pretty quickly. How does someone go about designing something like that gauge? In what kind of program? A video that covers that would be really helpful as I have lent really any so far, or maybe I’m not looking in the right place?
Very informative video, thank you! I have a thing about accents, so I i was curious, are you Finnish? Ive only known one Finnish person, so i apologize if im wrong!
I made my own board with this display and Esp32-wroom-32E it works with the example code, but not with this code, it crashes after drawing the first orange fill, so maybe I am doing something wrong with my config. What version ESP32 are you using and what is the your config in the Arduino IDE?
I reduced the size to 235 and that works. changed the background color to match. and it looks good, but still cannot figure out why this didn't work straight away. I'm using an esp32-wroom-32E xx8N module and minimal spiffs.
@@MegaScott So where is this memory? I expect it is on the LCD driver chip for fast access? Also, I think this is a sprite size limit not a memory limit. I say this because I got it working (Thank you @VolosProjects & @MegaScott) and then I created a second sprite, filled it with the same gauge data and it still worked. That is why I say it is a sprite limit not memory. So if what I am saying is true, how does it work with the initial 240*240 size for anyone?
That looks great! id love to do something similar using 2 slightly larger screens (4" square) to run RPM and Speed based on inputs from my car. Any advice on achieving this?
I have searched the net for a solution but can not find, this is the closest i can find, i have a gc9a01, an esp 8266 and a rotary encoder (KY040) a nema 17 stepper motor and a A4988 to drive that motor, is it possible to drive that motor and show the degrees in the display when i turn the rotary encoder?
Hi, in the pin mapping file GPIO5 is MISO but on your display BLK is connected to D5, is the Backlight? I'm trying to get a Waveshare 1.28" round display working but having no luck.
@@YONG0612 Hi @Scott. I have the same display and proble, Please refer to the fix above. It worked. Jack Hampson 2 months ago I had the same results with this code and the Volos's Smart watch code using the Arduino IDE and PlatformIO. Your img.setColorDepth(8) worked here but not on the Smart Watch. I pre-calculated all the static arrays in the setup loop and stored them in program memory freeing 6K of ram in this code and 9K in the Smart Watch. Both work afterwards. I'm guessing that a large sprite requires a lot of ram.
hey men thank u for make a good video.. can u help me. I wondering to know how to make SSD enclosure, what ic i use for that. and minimum components for build that. can u help me for got some reference for that. Im sorry if my question is out of topic of your content.
This is amazing. I'm not familiar with coding and electronics. But I would like to create digital gauges for classic Muscle Cars. For example, I have a 68 Chevelle and a 65 Impala. And planning to modernize them with newer engines that uses fuel injection and computer modules. OBD Link, and use the computer data to send to a monitor like an Android or Ipad set up. But would like to use the original Dashboard space where the gauges are and use digital displays. I'm going to be researching about this. Thank you.
Hi nice Video. I search for a Display for my ebike Project. IT shall be readable under sunligt condition. You as Display expert Do you can recommend a display
I can't understand why with my desktop pc at home it works, but right now I am abroad with my portable pc and I do the same procedure, but the screen appears like background color ORANGE. I also have many other programs with this display but the same problem. Nobody works. I changed oll the parameter on the library but It doesn't work.....
Hello. Why don't you reply to the problem I reported on Github? I can't run your project even though it was working before. Now I only have an orange background.
hi every time i try this i keep getting error message : a fatal error occurred: Packet content transfer stopped (received 8 bytes) any ideas on how to fix this. i have tried on 3 different esp32's but same error
Wow! Awesome video! Love your work. Great project, and thank you for the help and the code. I can adapt it to suit the sensors.
Thanks Antony, and thanks for coffees. 😀
Alway GREAT STUFF on your channel. Thank you very much for inspiring your community . Very appreciated.
Grreeeeeetings from Germany
Your work does have more influence as you might think!
The video convinced me to make time and pickup my hobby again!!
Thanks for your help!!!
Thank you, it is always nice to hear that.
Sir my respect, you have left me speechless, I only can say you are amazing!. Thank you for sharing your immense knowledge and experience. I am very grateful, Thank you very much!.
Thank you for comments, i am glad you like my content. Cheers.
even though I don't do these kind of things anymore, It's amazing to see others doing cool stuff! nice video!
Thanks for this excellent tutorial.
I purchased the display and downloaded your project. I'm using platformIO so I made the necessary tweaks to get it to compile. At first I had issues with it only displaying the orange screen. I finally got it to work by adding the line:
img.setColorDepth(8); right before img.createSprite(240, 240);
It seems to be working fine now but I'm not sure why I needed to do that? The image file is using 16 bits per pixel it seems. Color looks right though.
Anyway, a heads up if someone else is running into trouble.
Thanks again!
Thank you for writing your solution, today mamy people use platformIO , this will be helpful to people.tnx
@Wolfe032 thank you for the solution. I had the same problem and spent my time to check settings in libs. I had 7 pin version of the round display- without lcd underlight pin. Did you find the explanation the problem? Have you tried any different libraries?
I had the same results with this code and the Volos's Smart watch code using the Arduino IDE and PlatformIO. Your img.setColorDepth(8) worked here but not on the Smart Watch. I pre-calculated all the static arrays in the setup loop and stored them in program memory freeing 6K of ram in this code and 9K in the Smart Watch. Both work afterwards. I'm guessing that a large sprite requires a lot of ram.
Thank you for fix. I have been tearing my few remaining strands of hair trying to understand why I had an orange/yellow display. @Volos - would you please consider updating the code or adding a text comment to the repository?
Thanks tht fixed my orange screen, It was driving me nutts
Great video! :)
Not stellar walkthrough of the code, but it does not matter! You covered how things work and saved anyone who want to use the display a lot of time!
So thank you so much! :D
Tnx for nice comment😀
Great video and project. 👍Like Wolfe032 mentioned in a previous post, I had to add the line: img.setColorDepth(8); right before img.createSprite(240, 240); in the setup routine to get it to work for me. Now I'll have to figure out how to use different input pins for each separate gauge.
Excellent!
I would love to see a speedometer project using this display and small GPS module NMEA input !
very nice, i now want a round display for my esp32
That’s great. Thanks for sharing!
great video Volos, many thanks :)
Right what I was needing, I'll try it next weekend! Thanks very much
“…TX Dva” 😊
Awesome work as always
That was a great demo, you absolutely do not need to apologize for anything. Thanks for sharing. If you ever get a chance to work with the ZX2D10GE01R-V4848 round display, I'd love to see your ideas.
An extra tip; If you're using only one SPI device, you can connect RST to VCC(or NRST), and CS to GND. That's the easiest(less wires) way to connect a display, requiring only 3 wires and power. You'd only need to connect CS to an I/O pin if you're sharing the SPI bus.
Thank you, i didnt knew this
You do awesome work mate!
Sorry if I missed this in the video, how does the pixel layout work? is it like a square but only the existing pixels get displayed? or do you need to structure your data array with each line being progressively longer as you approach the equator and then shorter as you approach the bottom?
It is acting like normal square 240x240, as you said ,only pixels inside circle are visible
I have one of those cheap Chinese smart watches that broke. I'm going to try your code on the screen. It's a round screen and I have some great ideas for it if I can use it. Thanks for the ideas in the code.
I've always wanted to do a watch project, I think this display might just do the trick. I'd love to make it self-contained, but I couldn't use a full-blown ESP32 demo board, I'd have to use something much smaller. I didn't even know these displays existed, so props for that!
Yes, this display is perfect for smart watch.
Super! Really cool project!👏👏
tx два это сильно!)
спасибо за видео
Хотел написать такой же коммент :) на хорватском два = dva
I just get an orange display, the arduino examples for the TFT library work fine, I am not clever enough to know why it does not work, I have connected the inputs switch and pot to ground, but really interesting project.
Cool project :-) I'll adopt this to use the D1 mini and re-generate the image files to match BMW orange 🙂
Thanks a lot for this tutorial, Is there a tutorial where you used Square Line Studio using the Encoder and the same Screen?
You are amazing man! I want to use this round tft display for my next project and you show how to use it!
Tnx, i am glad that video is usefull to you.
@@VolosProjects i have a question is that possible to use two of this display alltogether displaying the same image using the same connection pin from ESP. I mean both display connected into the same ESP pin
I tried your code and at first I couldn't get it to work. All I got was an orange screen (TFT_ORANGE). After an hour of debugging I think my ESP32 was getting out of memory by the while(a!=44) loop. I then enabled the PSRAM on my board and it started working (although with a lot of flicker, but stil it works). So it's possible this won't work on boards without PSRAM. Great video!
what board you are using. i am using old esp32 with defoult setup in arduino ide, never had memory problems
@@VolosProjects With esp32 WROOM 32 it do work just in 240x230 sprite area...
Yes, very impressive display, layout and response time. The TFT_eSPI examples also give some guidance on the coding approach. The details for working with sprites isnt easy, but looks like it is worth persevering to get best performance.
This is cool. Would be super useful in other projects.
nicei work. I recommend something to cover the screen from sunlight, I've done a similar project before but facing with sunlight and display brightness is a pain on the neck. I cant saw most of the details I put effort on HMI. so I think the best always is custom 7 segment dashes, you can always make them enought bright to see it at daylight.
Nice! Thanks for sharing this., your explanation is ok.
Hello, i need Help for The tft display 40x160 (160x40) - DRIVER: GC9D01 - i need a Grafic-Programm with esp32 - Thanks
that look awesome. I have a question. What is the image format do you use ?
Tnx, 240 x 240
really nice video and application, i'd like to try similar on my Vespa monitoring, will be possible to have some more expleination of how connect sensors? thanks again
Thanks for all your videos, if I want to get started with ESP32 programming, which one would you advise me to buy please, I saw that the ESP32 C6 I think was the model, but I didn't understand some people say there aren't enough compatible libraries?
Hello, thank you for beginer i whoud recomend lilygo t-display s3, you will get best package for your money and it is not to hard to setup and use.
tks you@@VolosProjects, do you have a link pls ?
Hey mate, how many sensors can I run through this setup ? Also how do you recommend using a 5v sensor with the esp32 3.3v ? Cheers
It's really amazing
My IDE kept throwing up a serial comms error when trying to upload unless I unplugged the display. I suspect it's a serial comms pin use thing like Rx0 and TX0 on Arduinos.
Is the connector at the back for a ribbon cable ?
So is it possible to show real-time data coming from a sensor in this display?
Hello, can you please tell me what service can be used to make such pictures and convert them to code?
Hello,
I am trying to use this sketch.
Unfortunately the image and the pointer is not displayed.
I use a round display with GC9A01 driver without LED and a ESP32 -WROMM 32 controller .
Is there a newer version of this sketch ??
Greetings
Perfect, thank you !
Very good. One question: all gauges include files (.h) are arrays of the converted images. Any chance to have the original images so we can modify them?
Yes, I will add them in github today, i will notfy you,
@@VolosProjects Thank you very much. This will be even better to learn from it.
@@ssaguiar I added images to github
One of these with just a time and date setting would be perfect. I don't need the rest of the smartwatch features.
Great video!! How do you convert the image to the array you use for the gauge?
Tnx nick, here is tutorial ua-cam.com/video/R-qFKemDFyM/v-deo.html
Very cool! What is the display's power consumption? Asking for very-low power application. Thank you
Hi guys! Im loving your work! im trying to make myself a gauge following your code etc, but i cant figure out how to adjust what the display shows/the input from pin 14?
I'm still new to coding and i'd love some help please!
Awesome work. Way above my head. Would it be possible to have you build a simple pressure gauge for me?
Hi, a nice project, which board did you select when upload sketch use Arduino IDE please for ESP32-WROOM-32, Thanks.
How are images like this gauge even made? I don’t even know what it call an image like that to look it up, lol I’m new to this but I learn pretty quickly. How does someone go about designing something like that gauge? In what kind of program? A video that covers that would be really helpful as I have lent really any so far, or maybe I’m not looking in the right place?
hello, I have an LCD like this and want to make it a display monitor for video input. is there a module that is suitable for this type of round lcd?
this is so cool! do you help people write code? I'm wanting to do very similar but simply needs to display two pressures from 2x air pressure senders
Could this be setup to show multiple sensor readouts in numerical form instead of a needle gauge?
Very informative video, thank you!
I have a thing about accents, so I i was curious, are you Finnish? Ive only known one Finnish person, so i apologize if im wrong!
Thank you, no i am from Croatia.
What are the wires you're using here on breadboard?
I made my own board with this display and Esp32-wroom-32E it works with the example code, but not with this code, it crashes after drawing the first orange fill, so maybe I am doing something wrong with my config. What version ESP32 are you using and what is the your config in the Arduino IDE?
It sound like memory problem
Try to reduce size of sprite
I reduced the size to 235 and that works. changed the background color to match. and it looks good, but still cannot figure out why this didn't work straight away. I'm using an esp32-wroom-32E xx8N module and minimal spiffs.
@@MegaScott
So where is this memory? I expect it is on the LCD driver chip for fast access? Also, I think this is a sprite size limit not a memory limit. I say this because I got it working (Thank you @VolosProjects & @MegaScott) and then I created a second sprite, filled it with the same gauge data and it still worked. That is why I say it is a sprite limit not memory. So if what I am saying is true, how does it work with the initial 240*240 size for anyone?
That looks great! id love to do something similar using 2 slightly larger screens (4" square) to run RPM and Speed based on inputs from my car. Any advice on achieving this?
Look into the "Speeduino " project. Its a bunch arduino nerds that have building some awesome car computers using arduino
Please tell me how many of these displays can be attached to one esp32?
SO COOL
Dobar si, nema šta. Cepaj bratac...
Thanks a lot you helped a lot.
tnx!
Can gauges be made to react from an incoming PWM signal (such as from an RC receiver).
Nice! Work in Arduino UNO ??? is the same code? ( n00b here)
Many thanks to share it.
I have searched the net for a solution but can not find, this is the closest i can find, i have a gc9a01, an esp 8266 and a rotary encoder (KY040) a nema 17 stepper motor and a A4988 to drive that motor, is it possible to drive that motor and show the degrees in the display when i turn the rotary encoder?
Which driver do you select in TFT_eSPI library? Looks like 46 and 200 are close.
Setup file 200
@@VolosProjects Thank you. Nice project.
Interesting displays. Anyone knows if these are sunlight readable or only intended for dark environment?
they are visible on daylight
wow !!! It is it what i imagine to add to my Suzuki chopper handlebar. will need to get sensors and ask for help how to calibrate display's
Good job and explantation.
What type of potentiometer do you use for control? can you put a link? Tks for the info!
Normal 10k pot, i dont have link i have them for long time
Hi, in the pin mapping file GPIO5 is MISO but on your display BLK is connected to D5, is the Backlight? I'm trying to get a Waveshare 1.28" round display working but having no luck.
I use Waveshars 1.28inch, and it can't be displayed. But using "Arduino_GFX_Library.h", it can be displayed.
It may be that TFT_eSPI communicates with Waveshars 1.28inch debug.
@@YONG0612 Hi @Scott. I have the same display and proble, Please refer to the fix above. It worked.
Jack Hampson
2 months ago
I had the same results with this code and the Volos's Smart watch code using the Arduino IDE and PlatformIO. Your img.setColorDepth(8) worked here but not on the Smart Watch. I pre-calculated all the static arrays in the setup loop and stored them in program memory freeing 6K of ram in this code and 9K in the Smart Watch. Both work afterwards. I'm guessing that a large sprite requires a lot of ram.
hello can you make a smart watch with calling and tracking
Hi .. can I also feed the code via ESPHome (Homeassistant) into the ESP 32 ?
Can the GC9A01 display be used with the mega 2560 pro embed board?
Yes it can, bit it will not run fast like when is used with esp32
Hi! Could you help me to combine this project with the smart watch project, please?
Odlično
Kako Vas mogu kontaktirati, vezano za ovaj projekt?
Pozdrav, ovo je dosta stari projekt. Sto imate na umu?
@@VolosProjects Neke analogne instrumente zamijeniti digitalnim - radi se o letjelici!
- može li mail na koji se možemo ćuti?
@@kbelcar moze volos.marketing@gmail.com
hey men thank u for make a good video..
can u help me. I wondering to know how to make SSD enclosure, what ic i use for that. and minimum components for build that. can u help me for got some reference for that.
Im sorry if my question is out of topic of your content.
Why the screen seems a reflective or even e-ink display but is just a regular TFT? Is because of the color palette used?
It's IPS not TFT.
Thanks for this video! I have problem with "GC9A01", can you address with very simple "Hello World" project using GC9A01? / Thank you
This is amazing. I'm not familiar with coding and electronics. But I would like to create digital gauges for classic Muscle Cars. For example, I have a 68 Chevelle and a 65 Impala. And planning to modernize them with newer engines that uses fuel injection and computer modules. OBD Link, and use the computer data to send to a monitor like an Android or Ipad set up. But would like to use the original Dashboard space where the gauges are and use digital displays. I'm going to be researching about this. Thank you.
I have a "size of array 'gauge1' is too large
" during compiling. I use an arduino 2560 board. Any idea ?
I am also having this issue. Did you ever figure it out?
What kind of resistor and what nominal value do you have ?
10K pot
@@VolosProjects - OK !
In your code mr tft_miso 5 but pin 5 its BLK back light
Hi nice Video. I search for a Display for my ebike Project. IT shall be readable under sunligt condition. You as Display expert Do you can recommend a display
I am afraid that you will chise somethin diferent, thease displays are not good in direct sunlight
sir, why this error coming , it said "Compilation error: 'ledcSetup' was not declared in this scope"
hello the project coding and program on esp32 but the lcd start and the screen was orange only why ??
Your esp32 probably cabt hande 240x240 sprite, reduce sprite to 236x236
@@VolosProjects ok thanks i try this
If I want to use a 720x720 display can I take the esp 32?
when trying to compile the error file Compilation error: TFT_eSPI.h: No such file or directory, how to solve ? thanks
can you make a smartwatch step by step
Thank you!
I can't understand why with my desktop pc at home it works, but right now I am abroad with my portable pc and I do the same procedure, but the screen appears like background color ORANGE. I also have many other programs with this display but the same problem. Nobody works. I changed oll the parameter on the library but It doesn't work.....
same, only backgroung colour
if i wanted 14 of these round displays to each display one or two data sets on my truck - how many gages can an arduino handle output to?
Arduino will not be able to run one gauge smothly, esp32 is much faster but it thinh 14 will be to much. It can run maybe 3 of them in same time.
@@VolosProjects so either multiple esp32's or something more powerful like a Pi?
Hello. Why don't you reply to the problem I reported on Github? I can't run your project even though it was working before. Now I only have an orange background.
I dont know reason for that, It is problem with ypur library, IDE or conection.
What are the ledc lines of code for exactly?
The display brightness, maybe? Is that ok to use with other displays like the SSD1306 or ST7789?
yes, it is line used to set PWM and to se t brightnes, you can use ST7789 i already used in this video ua-cam.com/video/UUzywu2RrHc/v-deo.html
@@VolosProjects thanks for the help!
It is possible to post this library for nrf52840dk
hi every time i try this i keep getting error message : a fatal error occurred: Packet content transfer stopped (received 8 bytes) any ideas on how to fix this. i have tried on 3 different esp32's but same error
Can you upload some other sketches to your esp32, blink sketch forexample
@@VolosProjects yea can upload other sketches ok. where do the other terminals on the switch and pot go to? gnd, vcc etc?
Nice video!
Awesome video channel. I am a subscriber now to learn. Thanx. 1luv
Thank you, welcome aboard.
Very nice, but what is the alternative for people who do not want to buy from China?
I think adafruit have similar display