Hi Bongani. We don't actually operate these machines we buy, sell, rent and service them. I would think there are operator courses on line with various certifications but that's outside of the scope of what we know. Good luck on your journey with this brother.
Hey Jeremiah! That's awesome, congratulations on the training! Feel free to reach out to us if you have any questions we can help answer in the meantime!
It's funny to see the title says how to operate a Bell B40 and in the film you get shots of a B45. Not that it matters. Because they operate the same. I used to load these big ones in Hörselberg (Germany) where they were made. And brought them mostly to Bremerhaven (Germany). From there they went by ship to America. I believe they went to Houston Texas.
Congratulations on the new job! What questions can we help answer? Feel free to email us at marketing@newmantractor.com and we will do what we can to support.
hi, I drive a B30E on very rough terrain in a quarry. Is there a way to soften the throttle response? The truck lunges when your foot hits the peddle whilst bouncing around? Apart from that, I love the truck!! The warning buzzer whilst tipping is so loud!!!
Работал на BEII 40 в заполярь самосвал нормальный без проблем. Единственное сиденье на кочках подымаесь верх жёстко ударялось в ограничение и в жилудке всё за 12ч смены тромбовало, приходилось до полного накачивать что-бы сидушка не амортизировала.
Do you think temperature could be effecting it? Some kind of air leak in the seat system? Good luck out there brother. Thanks for watching and stay warm!
Hey Ronals sorry we are just now seeing this. We are on the selling and rental side for things but there are some resources online to get courses to operate. Here is one we found www.operator-school.com/ have a great day!
Peace be upon you. We have a Volvo a25d truck année 2003. I have a question when the truck is full. How do I walk in it automatically or in normal, I mean D / maneil, thank you. 🌹💖🙏👌
Hi friend thanks so much for watching and we appreciate your question. You may want to check with your local Volvo dealer for further instruction on that one or your operators manual. We just don't want to give incorrect advise on that particular machine make and model. Have a great day and sorry we couldn't be more help.
@@NewmanTractor Thank you, brother. Thank you for this information. I'll call your Volvo dealer and ask him a question. - a special greeting to you. Your day is good. Thank you, thank you. - I'm watching your channel. It's beautiful thank you for what you're offering for us. 💖🌹 💖💖🌹🌹thank you.
Could someone please explain something to me at 4:46. Either side of the (P) top middle there are 2 drive train symbols. What is the difference between the pair and what situations would you use them?
Means which differentials are locked the one on the right is unlocked. One on the left with the x’s means all wheels are locked. But you can change to w.e one you want. You can lock up the front or just middle or use all six
corie Dunning small truck (B18 , 20 , 25 , 30) is on the back of the cab on the left hand side. Big truck (B40 ,45 , 50 , 60 ) is on the left hand side nosebox
From an operator stand point don't buy bell/deere equipment. They are more set of the longevity of their equipment then the operators. Creating unsafe working conditions due to software. For example these trucks have an excessive idle shutdown. It can only be disengaged by revving the engine. Putting the truck in drive does not disable this feature. And if the timer negind while in drive but you do not exceed the needed rpms the truck will put itself into park. This can lead to serious injury or death in a emergency situation. Not to mention damage to the machine. Also the ergonomics of these machines have zero thought about operators wellbeing. Do not buy these trucks they are junk at the end of the day. Volvo, Cat, Komatsu. All the way.
Proud to be apart of Bell's Dealer for Indonesia...👍
Proudly South African
Am really interested
Very impressive machine 👍
It is my glad to say that I LOVE this job
Thanks Greham! We believe you should love wat you do and do as well! Have a great day!
Hi i would like to get a job to operate one of these what can i do i have the certificate for these machine
Hi Bongani. We don't actually operate these machines we buy, sell, rent and service them. I would think there are operator courses on line with various certifications but that's outside of the scope of what we know. Good luck on your journey with this brother.
this is a freakin cool truck
Thanks for your time..
Thank you for your time as well!
Nice presentation 👍😊
Hi Harjoni! Thank you so much for the kind comments! It is much appreciated :)
I love this job and i am in need of training school
Excellent
Thank you sir
You are so welcome!
Wow i like this type
Thanks for the comment! We appreciate you hangin out with us for the operator training here 😀
Thank you
Glad you enjoyed it Sekoai! Thanks for watching and have a great day!
Can I ship this Bell Dump Truck to India 🇮🇳?
Wow like this feature 👌, but it's come back (bed) automatically when dumping loads .?
Yes iTip is a great feature to make operators more efficient with their time. Thanks so much for watching and have a great day!
Very interesting
Thank you!
This is very cool
Thanks Austin! We really appreciate you watching! Have a great day!
So good
Thanks so much, Denaya!
Im really Interest in this...
I will be going for training to the minning site in two days...
Hey Jeremiah! That's awesome, congratulations on the training! Feel free to reach out to us if you have any questions we can help answer in the meantime!
Nice video
Thanks you master
What the function of the red big button on top of the B drive?
Christmas comin lemme ask santa
It's funny to see the title says how to operate a Bell B40 and in the film you get shots of a B45. Not that it matters. Because they operate the same. I used to load these big ones in Hörselberg (Germany) where they were made. And brought them mostly to Bremerhaven (Germany). From there they went by ship to America. I believe they went to Houston Texas.
Ho to remove torque conveter transmission housing to the bell
Hi Baby are you asking for a video on how to remove the torque converter transmission for bell trucks?
❤
I need help im from SA and i never drove adt before and i was gaven a job to drive adt so i need help
Congratulations on the new job! What questions can we help answer? Feel free to email us at marketing@newmantractor.com and we will do what we can to support.
Am very interested in learning how to operate this machine
What causes the hydraulic to mixed with water on Bell 40E
I want to know the trouble shooting area like sucking of air I the engine or the injector system
hi, I drive a B30E on very rough terrain in a quarry. Is there a way to soften the throttle response? The truck lunges when your foot hits the peddle whilst bouncing around? Apart from that, I love the truck!! The warning buzzer whilst tipping is so loud!!!
Thanks for your question. The B30E doesnt have a way to soften the throttle.
where did you do ur certificate/
Lean to drive?
Работал на BEII 40 в заполярь самосвал нормальный без проблем. Единственное сиденье на кочках подымаесь верх жёстко ударялось в ограничение и в жилудке всё за 12ч смены тромбовало, приходилось до полного накачивать что-бы сидушка не амортизировала.
Do you think temperature could be effecting it? Some kind of air leak in the seat system? Good luck out there brother. Thanks for watching and stay warm!
@@NewmanTractor я на смартфоне выделить и перевести на русский не могу. А Английский noi не знаю к сожалению! 🤔
best dump truck...
We feel the same way!
then u never driven a Volvo
@@Dumperskungen bell cat volvo, driven
Where can I go to school to learn how to drive one of those trucks anybody have info on that help me put that please
Hey Ronals sorry we are just now seeing this. We are on the selling and rental side for things but there are some resources online to get courses to operate. Here is one we found www.operator-school.com/ have a great day!
can i drive adt with class 1 hgv licence
Mf sy ingin tau kenapa brik pressure warning dan tiba tiba yunit kembali netral,,thanks
Can you send me book to read how to operate
Hi Kalinde! Unfortunately we dont have any operator manuals as we are not a Bell dealer, but I'm sure your local Bell dealer could get you connected!
I need that also
Since the drivers start with a unique pin number, you can associate the mirror settings with that pin number.
Nice tip brother! Thanks so much for watching!
don't forget the seat settings. if BMW can do with the car key i believe they can do it with a pin number.
Personally not a favourite to the bells Volvo is where’s it’s at
Question: how do you set/adjust the time on the clock? I have not found an option in the settings.
Oparetions manual
How can i get a job to operate one of these trucks i do have the certificate ?
Is that truck gearbox shifting different from cargo trucks? Please answer me
We are not for sure what you are asking brother? What cargo truck are you referring to?
Peace be upon you. We have a Volvo a25d truck année 2003. I have a question when the truck is full. How do I walk in it automatically or in normal, I mean D / maneil, thank you. 🌹💖🙏👌
Hi friend thanks so much for watching and we appreciate your question. You may want to check with your local Volvo dealer for further instruction on that one or your operators manual. We just don't want to give incorrect advise on that particular machine make and model. Have a great day and sorry we couldn't be more help.
@@NewmanTractor Thank you, brother.
Thank you for this information. I'll call your Volvo dealer and ask him a question.
- a special greeting to you. Your day is good. Thank you, thank you.
- I'm watching your channel. It's beautiful thank you for what you're offering for us. 💖🌹
💖💖🌹🌹thank you.
Very interested in learning how to operate this machine.
Je veux ça en français
J' ai d idée ça
Could someone please explain something to me at 4:46. Either side of the (P) top middle there are 2 drive train symbols. What is the difference between the pair and what situations would you use them?
Means which differentials are locked the one on the right is unlocked. One on the left with the x’s means all wheels are locked. But you can change to w.e one you want. You can lock up the front or just middle or use all six
@@josiah3618 thanks for the reply mate. Appreciate it 👍🏼
Português
Show us how to go to service mode 🤣and dealer mode if possible
Where's the hydraulic tank?
corie Dunning small truck (B18 , 20 , 25 , 30) is on the back of the cab on the left hand side. Big truck (B40 ,45 , 50 , 60 ) is on the left hand side nosebox
Hey Corie, the hydraulic tank is located behind the cab, to the left if you're sitting in the operators seat. Hope this helps!
Nazang ka chi geih v
Kui mono regane piro lek
What a mess that button operation section is.
Why not turn off the music while talking. You call this a training video?
Sorry you aren't into our videos. Hope you have a great day.
From an operator stand point don't buy bell/deere equipment. They are more set of the longevity of their equipment then the operators. Creating unsafe working conditions due to software. For example these trucks have an excessive idle shutdown. It can only be disengaged by revving the engine. Putting the truck in drive does not disable this feature. And if the timer negind while in drive but you do not exceed the needed rpms the truck will put itself into park. This can lead to serious injury or death in a emergency situation. Not to mention damage to the machine.
Also the ergonomics of these machines have zero thought about operators wellbeing.
Do not buy these trucks they are junk at the end of the day.
Volvo, Cat, Komatsu. All the way.
loose the music
Паркетник електрочасть ерунда все глючит бездороже только на асфальте
Вы ездили на нем? Как ощущения?
Way to complicated
Cheap rubbish truck!!!
This sounds awful to work on
❤