Upgrade parts LED Headlamp bit.ly/3Sckbdn Combination switch bit.ly/3cWSncZ Frame Bag bit.ly/3zQ6UA7 Better controller: bit.ly/3bjKT3a Alternative accelerator (ask seller) bit.ly/3OS26OS
Thank you very much sir you have explained the entire wiring method of the controller and the speed is also good it also seems to be a core blue tooth device thank you very much for the programming sir
I talked to you a few times on FB about you Fiido build, & said I was gonna buy 1, well I DID! These damn things (e-Bikes) are as addictive as drugs, & maybe even more expensive!!🤔 😂 I already have the Fiido T1, now just bought the Fiido Q1S for a 6.4kw build, depending on finances, & have a Fiido Beast on order for November, it's gonna be a busy winter getting these things ready for the spring, can't wait to troll people with my "mini missile" even it's done!
A VESC is a nice idea for it's compact size and customization, but VESC are are that good from a complete stand still, it usually needs a "push" for the motor and the Q1 being without pedals it might not be as good as a normal hall-ed controller.
@@TechTronic9000 I did not know that. I will look into it. Then a vesc could be used in a dual motor setup, where the other controller is not a vesc and gives the push from stand still.
@@phylaxxx, thanks. I have not yet bought the vesc, but will once i have some spare time. I read that a vesc may have a slightly lower top speed. Have you experienced this?
@@cristianosaturni The VESC can take advantage of field weakening which can actually increase your top speed at the cost of efficiency while travelling at those higher speed.
thank you so much for the follow up video, much appreciated. my controller looks similar with that but no Bluetooth, i guess a knock off copy 1000w, can go 45kph on 48v.
Hello, I also ordered Fiido q1s to modify it. I'm in SLovakia and have to say... nothing available in EU :) Where do you buy perts for fiido? I would like to transfer wheels from 11'' scooter to my fiido, but front and read wheelbase is not wide enough :(. Do you know if there is some shop somewhere where I could get tinning parts for my fiido?
In the current stage I'm running a 60V battery, new direct drive hub motor and power went to 2400W+. It is doing about 50km/h. Soon there will be a second motor install with an extra controller, taking power to 4800W+
![FIIDO Q1 CONTROLLER TESTING // FIIDO Q1S // ELECTRIC SCOOTER TROUBLESHOOTING 101 [TAGALOG] DYU](http://i.ytimg.com/vi/nERF0sfcjsE/mqdefault.jpg)
![FIIDO Q1 CONTROLLER TESTING // FIIDO Q1S // ELECTRIC SCOOTER TROUBLESHOOTING 101 [TAGALOG] DYU](/img/tr.png)
Upgrade parts
LED Headlamp bit.ly/3Sckbdn
Combination switch bit.ly/3cWSncZ
Frame Bag bit.ly/3zQ6UA7
Better controller: bit.ly/3bjKT3a
Alternative accelerator (ask seller) bit.ly/3OS26OS
Thank you very much sir you have explained the entire wiring method of the controller and the speed is also good it also seems to be a core blue tooth device thank you very much for the programming sir
You are most welcome
I talked to you a few times on FB about you Fiido build, & said I was gonna buy 1, well I DID!
These damn things (e-Bikes) are as addictive as drugs, & maybe even more expensive!!🤔 😂
I already have the Fiido T1, now just bought the Fiido Q1S for a 6.4kw build, depending on finances, & have a Fiido Beast on order for November, it's gonna be a busy winter getting these things ready for the spring, can't wait to troll people with my "mini missile" even it's done!
Wow! Looking forward to your build!
qs1 are pure🔥after 72v 3500w motor dont forget steering dampaner
Just what I was looking for thank you kind sur
Thank you for sharing! I am looking forward to do the same, but using a vesc controller. Have you thought about using one?
A VESC is a nice idea for it's compact size and customization, but VESC are are that good from a complete stand still, it usually needs a "push" for the motor and the Q1 being without pedals it might not be as good as a normal hall-ed controller.
@@TechTronic9000 I did not know that. I will look into it. Then a vesc could be used in a dual motor setup, where the other controller is not a vesc and gives the push from stand still.
@@cristianosaturni VESC controllers run just fine from stand still.
@@phylaxxx, thanks. I have not yet bought the vesc, but will once i have some spare time. I read that a vesc may have a slightly lower top speed. Have you experienced this?
@@cristianosaturni The VESC can take advantage of field weakening which can actually increase your top speed at the cost of efficiency while travelling at those higher speed.
Excelent job ! I am waiting for the motor swap
You and me both!
More information on wiring controller, please?
I have added some links in the video description for a similar controller that has some wiring diagrams. The one that I got had zero diagrams.
@@TechTronic9000 The controller in video is sine & link is square? 🧐
Great video, thanks for your sharing!
Thanks for watching!
thank you so much for the follow up video, much appreciated. my controller looks similar with that but no Bluetooth, i guess a knock off copy 1000w, can go 45kph on 48v.
Keep in mind that this is the stock geared motor, designed for low power and low speed. There is also a test ride incoming.
@@TechTronic9000 oh I didn’t mention that i also using stock geared motor, sorry for late reply, 😂
Congratulations my friend, amazing work!👏
Thanks a lot!
Hello, I also ordered Fiido q1s to modify it. I'm in SLovakia and have to say... nothing available in EU :) Where do you buy perts for fiido? I would like to transfer wheels from 11'' scooter to my fiido, but front and read wheelbase is not wide enough :(. Do you know if there is some shop somewhere where I could get tinning parts for my fiido?
All of my parts are order from China / Aliexpress, I have left some links in the video description.
Nice upgrade 🤓
I'll let you in a small secret, there is also a planned motor upgrade ;)
You have the diagram for connecting the speedometer wire?
The "sense" wire connects directly to a motor phase wire.
Damn, i was hoping you would should which wires go to which.
It was a lot of guesswork with this as the Chinese that sold the controller had no clue about it and provided almost no documentation.
How fast does it go after these modifications?
In the current stage I'm running a 60V battery, new direct drive hub motor and power went to 2400W+. It is doing about 50km/h. Soon there will be a second motor install with an extra controller, taking power to 4800W+
Recunostii romanii dupa accentul pe care il au in engleza
Disappointed ☹