In comparision, its as fast as an M3 E92 2008 0-160kph. Also around 10sec. Power to weight is 4kg/hp and that about the same as my Coupé b20. Today, my new build... EG hatchback B20 puts me around 3.75kg/hp. I do spin in 2nd gear, but im pretty good with throttle control. But the road surface in the video is perfect...good grip with the R888 too.
Are you using stock sleeves or at least a block guard/brace? Some say that the B20s need a block guard for high comp pistons..How does Brian Crower compare to Skunk2 Tuner2?.Are cast high comp pistons any good?...Sorry for the questions lol just curious on somethings, I too have a B20VTEC
Yes, stock sleeves and no block guard. The block guard is there for protection in high rpm, but the sleeve will crack easily if the tune is bad, block guard wont help. Also, the block guard needs to be installed correctly. I prefer forged pistons since they can take a beating, withstand detonation better and doesn't need oil squirters. Go with skunk2 pro2´s if you go for 12.0:1+ cr, and if below that, maybe stage2´s. I have no experience with brian crower.
Thanks a lot for the very informative reply..My head is slightly skimmed, stock cams, stock internals, cold air induction, exhaust header and 2 box decat 63mm exhaust and I have a stand alone engine management system called Dicktator...so you reckon I just need some nice cams and High comp pistons...I believe I need a block guard/brace for high comp pistons, is this correct?
Love this vid; I'm building a B20/ ITR crvtec and am shooting for 250 whp with or without spray, whatever it takes. Hopefully it pops vtec like this and sounds that good.
Yupp, placed the mic near the air intake... But i think there is too much sound distortion from the engine, belt ,ect... But atleast its better than Gopro´s sound recorder. :) yes, vtec kick is loud as fuk. Especially when i floor the throttle in wrong gear, 1:20 :D
Swwweeeet Ride!!!...I watched this video quite a few times lol....I got a B20Vtec...B20B + B16A6 head...I just wanna know if it can be modded to be as quick as those K20A swapped civics, all motor though...
Hi , very nice video. The car runs great! But what kind should I request the type of engine you have - B20Z ? A respectively . performance :) Oh and the exhaust is what kind ? :)
My old '82 GT kept door to door with a couple 2008+ M3s and that car was the same as my GSR on the 75 shot. Neither of those cars rapped the speedo as fast as this. I got 0-100 mph in the 12 - 13 second range on the street and the '82 GT was a 12.50 @ 108 mph car. Something is off. Your speedometer accelerates like a 115 mph car.
If you mean stock k20 ? yeah, sure! I easily pulled away from a Civic EF9 k20a2 swap with stripped interior. But your b20 needs some high lift cams (skunk2 st2 or pro2s) and more compression (11.0:1+). But in the end, a K20 is faster with better/high lift cams.
Scott Gonzalez either skunk2 stage2 or pro2, i dont really remember since it was a long time ago and i have had several different cams in it, but Header is a hytech copy.
This video is wierd... You are getting 0-160kph in 10 seconds? So this is a low 11 second car? And it gets plenty of traction slamming into second gear? Nothing in this video makes sense. I had a bolt-on GSR on a 75 shot in a 2300 lb integra that went 12.80s @ 108 mph and it was no where near as fast as this car. Are you making like 350whp?
The marvelous sound of pure VTEC. One of the best VTEC sounds here on UA-cam, I love the fact that it is NA. Have fun with that beast!
a wonderful Honda clearing its throat
Let me clear my throattt
I have a 95 b20vtec coupe too !! My brotha from another mother right here
Best sounding B20 on UA-cam!
In comparision, its as fast as an M3 E92 2008 0-160kph. Also around 10sec. Power to weight is 4kg/hp and that about the same as my Coupé b20.
Today, my new build... EG hatchback B20 puts me around 3.75kg/hp.
I do spin in 2nd gear, but im pretty good with throttle control. But the road surface in the video is perfect...good grip with the R888 too.
Yupp i know, it was tuned for E85 but the gasstations just switched to E70 and E75 a few days before... "winter fuel".
One of the best VTEC sound ever....
God bless this man , amen
b16a2, ported around the valve seats and smoothed + reworked combustion chamber.
Wow that sound is amazing.
One word..... Love
Are you using stock sleeves or at least a block guard/brace? Some say that the B20s need a block guard for high comp pistons..How does Brian Crower compare to Skunk2 Tuner2?.Are cast high comp pistons any good?...Sorry for the questions lol just curious on somethings, I too have a B20VTEC
Yes, stock sleeves and no block guard. The block guard is there for protection in high rpm, but the sleeve will crack easily if the tune is bad, block guard wont help. Also, the block guard needs to be installed correctly. I prefer forged pistons since they can take a beating, withstand detonation better and doesn't need oil squirters. Go with skunk2 pro2´s if you go for 12.0:1+ cr, and if below that, maybe stage2´s. I have no experience with brian crower.
Thanks a lot for the very informative reply..My head is slightly skimmed, stock cams, stock internals, cold air induction, exhaust header and 2 box decat 63mm exhaust and I have a stand alone engine management system called Dicktator...so you reckon I just need some nice cams and High comp pistons...I believe I need a block guard/brace for high comp pistons, is this correct?
Love this vid; I'm building a B20/ ITR crvtec and am shooting for 250 whp with or without spray, whatever it takes. Hopefully it pops vtec like this and sounds that good.
daam bro that this sounds healthy!! Props!
Vtec sounds sick!
Honda make the best 4 cylinder car engines that's for sure
This is one if the better videos out there. And that is one quick b20v. Sounds great too. Did you tune it yourself??
What's that multicolor gauge in the center of your dash that reads "Lean" at the beginning of your video?
+rockethound69 Thats a PLX Air and Fuel gauge. Measures the amount of fuel that is ignited, if there is too much or too little of it.
that thing pulls hard! i cant wait to start my b20v
That's an insane crossover haha
Sooo... Tuner2 for setups below 12cr and pro2s after 12... and there only helps e85...dilemma
whats the power on this setup at the time of the video?
Edelbrock Performer X with 70mm throttlebody.
Yupp, placed the mic near the air intake... But i think there is too much sound distortion from the engine, belt ,ect... But atleast its better than Gopro´s sound recorder. :)
yes, vtec kick is loud as fuk. Especially when i floor the throttle in wrong gear, 1:20 :D
holy shit! brutal sound!
1:25 VTAKKKKKKKKKKKKKKKK
VTEC idiot!
Jamie Kinnaer ^ wow..... go away
Who are you to send me off this channel. So no I ain't going
alright you can stay.. just cause your amusing. you have your right to enjoy vtak also, have fun :-)
You're* Use correct grammar then we'll talk
Thanks. Custom short ram intake. :)
Sounds great
I hope that your not doing run like that on a empty thank of gas !? or is you gauge is just not working ?? lol very nice tune ! sound healthy
Swwweeeet Ride!!!...I watched this video quite a few times lol....I got a B20Vtec...B20B + B16A6 head...I just wanna know if it can be modded to be as quick as those K20A swapped civics, all motor though...
what cams?
WOW!!! Powerhouse!!! what head head did yu for this build??
Because im in the "wrong gear" just to make the vtec kick louder.
damn vtec is just awesome. r u using the external mic again? it sounds like im inside the engine!
Clean bro.makes good power throughout the whole powerband.nice..what intake? Also are u cammed?
What mods are done to this engine? Looks like it runs real nice. I'm thinking of doing all motor b20/VTEC in my 94 del Sol. Thanks
Hi , very nice video. The car runs great!
But what kind should I request the type of engine you have - B20Z ?
A respectively . performance :) Oh and the exhaust is what kind ? :)
nice wats the setup on the engine?
sound mmg padu
what kind off block do you use on this? b20b3?
B20z1
What muffler are u using
Niceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee !
b16 head?
ys1..?
Sounds good what header and exhaust are u using? What intake mani and intake?
My old '82 GT kept door to door with a couple 2008+ M3s and that car was the same as my GSR on the 75 shot. Neither of those cars rapped the speedo as fast as this. I got 0-100 mph in the 12 - 13 second range on the street and the '82 GT was a 12.50 @ 108 mph car. Something is off. Your speedometer accelerates like a 115 mph car.
Yo vtec on ur car is fucn crazy!!!
Buena maquina
whats the mods list? would love this setup, cars nice btw
Sounds sooooo good!! :(
Itb's?
well respected build! is it tuned? and it really seems to grip pretty well
amazing!! what intake used? short or CAI
dude what all is done to this car..? sounds fast as shit..
If you mean stock k20 ? yeah, sure! I easily pulled away from a Civic EF9 k20a2 swap with stripped interior. But your b20 needs some high lift cams (skunk2 st2 or pro2s) and more compression (11.0:1+). But in the end, a K20 is faster with better/high lift cams.
Thats amazing man..
how many hp you got of that b20 ?
I am planing to do a b20 soon, what comp pistons u have ?
thx
Nice ej2 brah I got one as well and im tryna do a swap to mine as well lookin at either b20 or b18c
Ok brah! !lol dumb fucks killing the English language
Woahhh sick bruv !!!! :DDDDD
Indeed :)
Y21 from a ´97 del-sol B16a2... European market.
How many hp Your car?
nice vtec dude
Did you have 4.7 or 4.4 fd when you recorded the video? Thanks !
Looks like the 4.4. Mine is exactly the same
Yup probably just a b16 tranny
Stock Y21, no LSD... S80 4.7 in 2013.
what cams and header?
Scott Gonzalez either skunk2 stage2 or pro2, i dont really remember since it was a long time ago and i have had several different cams in it, but Header is a hytech copy.
Oh ok thanks bro.
holy fuck thats quick is it all stock with just an lsv kit?
thats weird i read few coments and was suprised at the lack of haters
high compression, Je forged pistons.
damn.
Thanks! ...All motor ;)
Amazing !!! How many whp ??
This video is wierd... You are getting 0-160kph in 10 seconds? So this is a low 11 second car? And it gets plenty of traction slamming into second gear? Nothing in this video makes sense. I had a bolt-on GSR on a 75 shot in a 2300 lb integra that went 12.80s @ 108 mph and it was no where near as fast as this car. Are you making like 350whp?
wow!! :D
BWAHHHHHHHHHHHHHHHHHHHHHHHHHH
Is that a b16a2? Im only 10
b20
wat gear box??
EDM Y21 4.4, no lsd.
WOW MAN WHAT ARE YOUR MODS BRO
subbed
Sounds like it has ITB's
Hahaha thanks :D
Lean it out a little you don't need 12 af you would have more power with 13.5-14.7 af
Well this truly is my porn cuz I could stroke off to vtec crack all day long
sorry if its been asked before but whats the head ? and cams?
John Wick if i remember correctly it was Skunk2 tuner2 cams and b16 head.
I like how you dont spin 1st and 2nd. not even 1 single spin. nice!! i hate the fact that i spin 1st and 2nd
I launch at 1500rpm in 1st gear and about 50-70% throttle. 2nd gear hooks because that part of the road grips very well and i got some fresh R888.
1m20s yo
hahaha...just watch FUEL ARROW!!!:D
mean vtec tho
car is mean.
EDM Y21 wo/LSD....lol
But yea nice car tho
damn dude...my grandmas car can go faster than that....
Grow up.
Sure, what does your grandma drive?
A bugatti?
+Ww2fighter1 lollll
+Medicated TV
smoke your pot and dream
People spend $20k on a quick car, when a $3k car can blow them out the water