Thank you for this video! I just did this to my table last night. If anyone is curious the plastic stuff that I found is called “clear vinyl”. Couldn’t find at Walmart but found it at Joann fabrics! Lots of work but 100% worth it. 😊
Tyler I finally ordered the materials and covered my old table and it looks so good. Had to come back here and thank you for this video a year later now I finally took the time and reupholstered it. Your a beauty
@@chrissajdik that’s awesome! Glad to hear :) I actually think I need to redo this one after however many years. The one spot on the plastic split a little bit.
I'm not much for commenting (until today) but for over a year now I've been meaning to thank you for the video. Thanks to you I have a super Mario world/Mario Brothers 3 bed and a Muppets arm rest. Just need to get my InkBed chair done now.
First, thanks for the cartridge video! Saved me a lot of stress figuring it out. We're redoing several beds to spruce up the place before reopening (coronavirus has us closed here in Ohio). Anyway, do you happen to know how thick (what gauge/mm) the vinyl clear fabric is? I want to get some online but there are millions of options and I don't want to get stuck with something too flimsy and thin or too thick and unmanageable. Again, appreciate all your vids!!!
Monica Lachman hmmm I forget. It was the middle one at Walmart. Def don’t get the thinnest one it will rip easy. And the thickest will be too hard to work with. I’m glad the videos have been helpful! We are still shut down here in PA too. :/ we’ll make it through tho!
I noticed that you covered up the hole where the headrest pillow sits in it, did you cover the pillow too or did you just discard the pillow??? If you did cover the pillow, please post a video!!! I am literally covering my tattoo bed now so the quicker the response the better
I dont really use this profile but i needed to leave a comment, Which bed is this?! Because i see alot and sooo many have mixed reviews on durability and weight capacity!
![[ how to make folding bed ] paano gumawa ng folding tattoo bed 🛌](/img/n.gif)
Thank you for this video! I just did this to my table last night. If anyone is curious the plastic stuff that I found is called “clear vinyl”. Couldn’t find at Walmart but found it at Joann fabrics! Lots of work but 100% worth it. 😊
Using a bunch of your favorite stickers works too if you cant find fabric you like! Just did mine, thanks for the video man!
Tyler I finally ordered the materials and covered my old table and it looks so good. Had to come back here and thank you for this video a year later now I finally took the time and reupholstered it. Your a beauty
@@chrissajdik that’s awesome! Glad to hear :) I actually think I need to redo this one after however many years. The one spot on the plastic split a little bit.
Nice idea...i would want to have a pink tattoo bed...😊
Any idea what kind of plastic you used? I know this was 3 years ago, but I can not figure out what to get in amazon...
I got it at Walmart. It’s the kind of plastic old people put over their couches. You have to buy it by the yard. They cut it there for you.
Do you have a link to the plastic I can't seem to find it. Love the idea!!!
No I don’t you just get it at Walmart or a fabrics store
Google pvc table cloth
Have you ever done this with a hydraulic bed?
Thank you I would never think to use that, but now I wanna!!!!
Hi! Thank you for all of your videos! Thats so awsome 👌😄 i would like to know if you put something on your plastic cover when your tattoing?
Yes I always cover it with a disposable sheet or plastic wrap
I'm not much for commenting (until today) but for over a year now I've been meaning to thank you for the video. Thanks to you I have a super Mario world/Mario Brothers 3 bed and a Muppets arm rest. Just need to get my InkBed chair done now.
First, thanks for the cartridge video! Saved me a lot of stress figuring it out. We're redoing several beds to spruce up the place before reopening (coronavirus has us closed here in Ohio).
Anyway, do you happen to know how thick (what gauge/mm) the vinyl clear fabric is? I want to get some online but there are millions of options and I don't want to get stuck with something too flimsy and thin or too thick and unmanageable.
Again, appreciate all your vids!!!
Monica Lachman hmmm I forget. It was the middle one at Walmart. Def don’t get the thinnest one it will rip easy. And the thickest will be too hard to work with.
I’m glad the videos have been helpful! We are still shut down here in PA too. :/ we’ll make it through tho!
Does Joann fab have the plastic
I had to get that at Walmart
To tight the plastic i would use a heat gun but would just make a test piece first to make sure nothing burns or melts
where did you buy?
I think amazon? I forget it’s been years
How did you apply the plastic wrap after the fabric was finished being stapled?
Stapled it
hey were can i find that fabric with the comics books thanks
PYTHONBUILDS45 I got it at Joan fabrics.. I’ve also seen it from Walmart
Seventh Trumpet Tattoos ok thanks bro good looking like your channel by the way I’m learning how to tattoo
PYTHONBUILDS45 that’s awesome man good luck! Thank you for the support !
Great video, my sphynx cat ruined all my tattoo furniture biting holes in them, this has saved my life
Where do you get the fabric from ?
I noticed that you covered up the hole where the headrest pillow sits in it, did you cover the pillow too or did you just discard the pillow??? If you did cover the pillow, please post a video!!! I am literally covering my tattoo bed now so the quicker the response the better
I put the pillow in and just covered over it because it was going to be hard to do haha
Hey does the plastic make the clients hot/sweat while sitting?
It’s covered with a table cover when I’m tattooing so they aren’t really ever actually touching it
@@ThatTattooGuyOfficial I was thinking about doing that to my barber chairs.
That seems a little more tricky then my table but if you could pull it off that would be awesome
Where can I buy that plastic?
Walmart, or a fabrics store
How many yards did you get .I'm going to purchase the same one .
I think I got 3 yards per section ?
Dude this is legit, thank you so much for this video!!
Where did you get the tattoo bed from.
Costway
OMG YES!!! I’ve been wanting to customize my tattoo stuff so bad...super doing it now.
Awesome! Tag me on Instagram with the finished product !
Link to my insta is in the video description
I definitely will. Just gotta figure out what design to do now!!! So many fabrics, so many fandoms...just followed you Mystic Kristin Tattoos
I dont really use this profile but i needed to leave a comment, Which bed is this?! Because i see alot and sooo many have mixed reviews on durability and weight capacity!
I don’t remember actually. I got it a while ago. Sorry bud
If they don’t find you handsome, they will sure find you handy 😂❤
♥️ thank you lol
Keep your stick on the ice.
Looks cool. Nice work
Hey dude thank you 👍 great channel
Hey ! Thanks I appreciate it! I'm also a big fan of you mr. White. I'm glad to see you made it out alive.
have me getting ready @ 7:40 am to go supply shopping to get my tatoo bed customized 🤔😆💕 thank you for the inspo and tips
Could you tell me where you got your plastic from ?? And maybe a name for it
You could get it from Walmart, idk the name of it. It’s in the fabrics section. Just ask them for the plastic old people cover their couches in
Get a air stapler bro, be so much faster
Bro you really inspired me
That means a lot! I hope you do something with that inspiration!
Hail Lucifer, our Lord and Savior. Good to know information here, bud.
Mouai...
So very bad ass
How did you get the springs to the bar I’m having issues with it since the spring is so tight
How did you get the clear vinyl on ?
Stapled it on