"Three times world champion?" "Yeah, baby." "Like 12 years ago?" Something about this whole dynamic was hilarious. One of the world's best skaters shows up and you just keep throwing shade at him and damn near get him killed on the box. CJ's the best.
First hack had me laughing. "You're CJ Wellsmore; you can do anything," and then he falls down. I really enjoyed the interactions in this video. Thanks for the info on clicky wheels. Mr. Wellsmore is one of the GOATs.
I just had to pause the video at hack #4 to check if hack #3 works on Android phones and I can confirm it works on my dinosaur Pixel 3a! The travel tip by CJ using the buckles too is sick!
Hey. I like this channel. There's a casual light-hearted nature to it that's really refreshing in contrast to the standard HEY GUYS YA BOI HERE WITH SO AND SO AND WE'RE GONNA BE TALKIN HACKS RIGHT AFTER WE TALK ABOUT DORKVPN SO STICK AROUND LETS GET RIGHT TO IT
No hacks, just real engineering advice. Shim your wheel shoulder bolts too, avoid the clack sound. Assuming your bearing spacer length is correct for EACH wheel. More later if you wish, bed time now. G'day or G'night from Oz.
@@almostremembered if your wheel bearing spacers are indeed the same width as the wheel "shoulder" where the bearing outer race sits, then your wheel/bearing assembly is good with no side load applied, =happy bearings that spin nicely. Next is that each part of your frame will be a slightly different width, your shoulder bolts that secure the wheels bottom out when tensioned but may still have some free play. Allowing the wheel to move side to side on the shoulder bolt/axle, giving you movement/clack noise as wheel is not completely clamped. Ie the bolt is too long to properly clamp the fixture as intended. This will be different for each wheel and place in frame due too machining and casting tolerances, for shimming bolts you need to find which wheels still woble side to side when tightened up. Then shim under the head of bolt against outside of frame to remove play whilst still allowing bolt to bottom out/tighten properly.
I tried to make this easy to understand for the average bloke, but can't dumb it down too much or it would sound retarded. Nathan Chase it's like blue printing engines, fettle each part to work harmoniously with the rest. Hope that helped, oh I forgot, shims can be made of take away containers/ciggie filter bags, anything stiff enough to hold under compression force. As long as it's the right thickness.
I think when you film in the photo mode you loss the digital stabilization so the video is not cropped. But you still have the optical and mechanical stabilization.
Im Aussie and ive always said CURBS and ROYALE, pretty sure everyone else I know does lol. Also say NOOGAN for a Farv. I thought that was an American thing.
I will confirm that there is nothing better than mashing at a un-waxed gutter and locking in a shifty for breaking in your skates or frames. That can't just be an aussie thing though
Hey Kaylo - I’m interested to know: Do you find that your favourite UA-cam channel transcript their own subtitles or do you usually have to use the auto-subtitles?
@@LocoSkates To be fair, the auto CC doesn't do a great job with the accents in display. It is really hard to understand at times with the captions that are there currently. I also understand though that the price for writing a transcript isn't feasible for everyone. For example, pornstars ->top ones. Lull->love Alley oop soul->a true salt. That is what the auto captions are putting in.
"Three times world champion?"
"Yeah, baby."
"Like 12 years ago?"
Something about this whole dynamic was hilarious. One of the world's best skaters shows up and you just keep throwing shade at him and damn near get him killed on the box. CJ's the best.
Australians are well practised in handling banter
Watching CJ just makes you feel good
First hack had me laughing. "You're CJ Wellsmore; you can do anything," and then he falls down. I really enjoyed the interactions in this video. Thanks for the info on clicky wheels. Mr. Wellsmore is one of the GOATs.
STOP TRYING TO BREAK CJ, JAKE!!!
I loved those hacks, especially the last one. Cheers
Absolutely 1000% mash a guddah. Most overlooked and important step in getting new skates. Photo/video hack was a 🤯
I love Loco vids keep em comin boys!
The last one is top notch!111 doing it rn
This had me smiling the whole time. Great video!
That iphone wide angle lens trick works on Pixel 6. Just tried it!
Doesn’t work on the 7 :(
I just had to pause the video at hack #4 to check if hack #3 works on Android phones and I can confirm it works on my dinosaur Pixel 3a!
The travel tip by CJ using the buckles too is sick!
He’s different man, I like this guy.
He calls it a shiftty .... This video is pure fun
That's because it's a shifty!
@@OpenRecordsdamn straight it’s a shifty, ya cnt!
Love it! Once you blade your never fade….
Feel good vibes
CJ is a proper legend!!!
Didnt know that iphone hack, deffo gona use that one! Awesome video guys, keep them coming! Cj is always a great personality too.
U just blew my mind with the iPhone hack
This was brilliant Friday night viewing. Cheers guys
Hey. I like this channel. There's a casual light-hearted nature to it that's really refreshing in contrast to the standard HEY GUYS YA BOI HERE WITH SO AND SO AND WE'RE GONNA BE TALKIN HACKS RIGHT AFTER WE TALK ABOUT DORKVPN SO STICK AROUND LETS GET RIGHT TO IT
I wanna see the out-takes! I bet it was fun!
The video/photo hack and 360 into a trick actually help. Very prime.
Love CJ! Awesome video!
I remember when cj was just a pup unfortunately at 45 all my skating is behind me, though watching you guys sure brings back some fond memories
dude, these hacks are great! nice surprises
That iphone hack though 🤯
Vocation?
Excellent choice!
There’s some pretty serious beer snobbery going on at the shop these days.
Life's too short to waste any time drinking shitty beer.
damn guys, mind blown on multiple levels
ily cj
Great editing! Love this vid
Cj " life's gooda " wellsmore 😎🤙🏻
I just noticed someone is rolling big with the Bentley. Awesome hacks
🏆🏆🏆
That wide angle hack!!
"you're CJ Wellsmore, you can do anything"
"AHHHH"
"You mashed it in"
😭😂😂😂 Love this
good vibes
Yes CJ 👊
My clicks always come from the frame boot rivets, rollerblades. Crazy glue sometimes will work if your not too aggressive.
Your CJ wellsmore you can do anything, hell yeah he can 😂
Keep blading. Love CJ
Beautiful
For Android filming, simply select any of all the options without fuss
Trying to kill CJ 😂 😂 😂
😊
what's frames is cj rocking?
Anyone else got any good hacks?
No hacks, just real engineering advice.
Shim your wheel shoulder bolts too, avoid the clack sound.
Assuming your bearing spacer length is correct for EACH wheel.
More later if you wish, bed time now. G'day or G'night from Oz.
@@adrianzmajla4844 Could you explain this? Thanks!
@@almostremembered if your wheel bearing spacers are indeed the same width as the wheel "shoulder" where the bearing outer race sits, then your wheel/bearing assembly is good with no side load applied, =happy bearings that spin nicely. Next is that each part of your frame will be a slightly different width, your shoulder bolts that secure the wheels bottom out when tensioned but may still have some free play. Allowing the wheel to move side to side on the shoulder bolt/axle, giving you movement/clack noise as wheel is not completely clamped. Ie the bolt is too long to properly clamp the fixture as intended. This will be different for each wheel and place in frame due too machining and casting tolerances, for shimming bolts you need to find which wheels still woble side to side when tightened up. Then shim under the head of bolt against outside of frame to remove play whilst still allowing bolt to bottom out/tighten properly.
I tried to make this easy to understand for the average bloke, but can't dumb it down too much or it would sound retarded. Nathan Chase it's like blue printing engines, fettle each part to work harmoniously with the rest. Hope that helped, oh I forgot, shims can be made of take away containers/ciggie filter bags, anything stiff enough to hold under compression force. As long as it's the right thickness.
I think when you film in the photo mode you loss the digital stabilization so the video is not cropped. But you still have the optical and mechanical stabilization.
Interesting. Either way, the stabilisation looks really really good still. It’s very impressive.
I want to skate the CJ Seba skates
Do you guys ship to USA?
Yes. Easy peasy!
Im Aussie and ive always said CURBS and ROYALE, pretty sure everyone else I know does lol. Also say NOOGAN for a Farv. I thought that was an American thing.
It’s definitely gutter and shifty 🤔
I will confirm that there is nothing better than mashing at a un-waxed gutter and locking in a shifty for breaking in your skates or frames. That can't just be an aussie thing though
ahahaa buy these skates 😂
Wow those are the clickiest wheels I ever seen
Subtitles please!
Not everyone can hear 👂
Hey Kaylo - I’m interested to know: Do you find that your favourite UA-cam channel transcript their own subtitles or do you usually have to use the auto-subtitles?
@@LocoSkates To be fair, the auto CC doesn't do a great job with the accents in display. It is really hard to understand at times with the captions that are there currently.
I also understand though that the price for writing a transcript isn't feasible for everyone.
For example, pornstars ->top ones. Lull->love Alley oop soul->a true salt. That is what the auto captions are putting in.
😩🤦🏼♂️ thanks
The real hack could be release a Cj2 in size 45...
mash a shifty at the gutter xDDD
hey it's not a step in it's a hop on.. .. I might be reaching
JAKES PHONE HACK!!! works on my Samsung s21 ultra too. Perfect. Such a great little hack there. Respect.