These micro brusless sub 50g quads are the future. I have been flying FPV for 4 years. And the flying sites and public image have suffered. The sub micro quad changes all that. People look at it as a toy. They smile and laugh watching it fly. I hope you get with piroflip and design a sub 50g quad. FYI, I have a 1s whoop with a AOI Vfx/DVR. The video isn't great (VGA) but it's the next thing. A AOI Vtx/DVR 720p at under 6g with smart audio control 25-100mw output, would be the ticket.
I'm working on the frame but I've asked TBS to consider making a brushless whoop AIO 2S board with crossfire built in. With this kinda performance and flight time, you can really cover a LOT of ground. The super low output 2.4g stuff just doesn't cut it.
@@Kabab Here is the video I made. ua-cam.com/video/K-x7bj4_b3k/v-deo.html With this Vtx/DVR. Wolfwhoop WT05-DVR AIO Micro Camera with DVR and 5.8GHz 25mW FPV Transmitter for FPV Quadcopter Drone www.amazon.com/dp/B076HHRKXW/ref=cm_sw_r_cp_apa_i_KBOiCbJC247EM
This is really close to my next dream project. I'm going for a micro with DVR, but I want to make it 2s like the Mobula (that is to say two 1s batteries in series)
Yes, yes yes yessssssssss!!! I love this build!!! I also think this will be the future of FPV. Im sure in some years more powerful and tinier vtx’s fc’s and rx’x will come out and will improve the FPV experience while minimizing the risks to others. Please don’t abandon this initiative. You can do much good to this segment of micro brushless Thank you veeeeeery much for this video!!!!
That's some impressive flying, especially for a 1S powered tiny flyer. Seems like this design hits a massive sweet spot between power and efficiency. Respect!
I have learnt two things from this awesome video. Firstly I can fly this into someone’s eye and secondly they won’t hear it coming until it’s three feet from their face.... excellent!
The video that got me into toothpicks. 4 years later i now have 4 working 3" toothpicks, from 1s-3s, and 2 2s 2.5" toothpick (one on an OG apex toothpick frame).
love this build! hope you can bring your frame to production- as far canopy i can tell you by experience that the one on the Blodclash 75mm whoop is made of some flexible plastic that even after up-grades and crashing for 8 months-(me), it still has the original canopy, no breaks, no cracks!
This is the O.G brushless & I still love this 1S pick. Going to build one to fly around our unit complex without cutting anyone up. Makes me wonder if there's potential for a *featherpick*
I just built one from a snapper7 with those props I still had from trying to build the brushed Flying Prius and a quick 3D printed frame. Hovers under half throttle, really smooth for indoors on stock PIDs. Your PIDs seem super high, I'l try slowly increasing them outside. I have like 3mm of clearance between props and even less between props and the board. The stock canopy was too big, so I 3D printed a simple camera holder. 37.4g AUW
Yeah these pids are what I used to use on the brushed quad. Seems like the brush less is similar in that respect. I'm not sure if it has to do with the total lack of power or the tiny motors and large prop or something.
Please release this as a kit! With all parts but not built. The small and safe size is such a turn on for me! So many places i want to rip but cant because of people. Looking forward to it!
BTW, the Beecore F3 V1 Brushless does not have the motor plugs attached to the FC, but it does come with the plug connectors so you could easily mount them on the top or bottom of the board, and even to side. Not sure if this will help you routing the wires or not but I thought I would mention it. Of course, you could remove and reattach the plugs on most FCs but this one would save a few steps.
I´m very impressed by your result, never think that this 0703 motor are able to run the 66mm propeller, this will save me a lot of weight, I use these propellers in 1103 15000KV motors in 1S and they are great, slim-x frame. Using this motors I can shave 8 to 10g of my build. Thanks.
Saw a beta75x fly yesterday, and that thing rips! These whoops are coming into a completely new breed, and i want one! On a completely different note, i see rotor riot may be exploring a marketable fpv hex! Hexacopters are a ton of fun to fly and need to be more available to this hobby! Whoop hex, I'm in!!
I have never seen so much good 1S micro brushless quads in my entire FPV life than over the past four months lol They just keep getting better and better lol Looking forward to the final frame :D
I had a hubsan that used those props or something similar, very elliptical blades. They do work surprisingly well on 1s. There are bull nose props that I put on that worked almost better but resonate a bit. I ordered a trashcan and might order a second to transfer the parts over to your frame. Or maybe I'll 3d print a frame without prop guards.
I'm seeing mixed reviews on all the 2s micros. Hard to know which to choose. The mobula 7 looks nice as does the emax but it's like every reviewer has a different Achilles heel for each of them.. Perhaps I'll get an emax to transfer the parts, sure it's 1s but atleast having different props will help with the turtle mode issue. Guess I'll make a decision on a second micro after I recieve my trashcan which has been shipped.
@@danieldimitri6133 I would recommend everyone skip the 2S whoops. If you want one, choose the parts and build it yourself. You'll get a MUCH better quad. The Beta 0802 motors with crazybee F4 and the AIO cam from the Mobula with a Beta 75mm frame and the HQ 40mm prop. This will give you the best performance for sure.
LOVE how you just keep pushing the envelope on this stuff, Roogi. Good work, mate. Don't forget to take some time for you and family this holiday season!
This is as silent as a quad could possibly be. You can fly it in a room and the person one room over would never hear it unless you ran into something.
@@SPL-6 no need for any protection. It only weighs 39g. It's really hard to break anything with that low weight. The frame is total overkill at only 4.5g. It's 2mm carbon. The caddx eos may be a better camera but that's the sore spot for these things. The camera is just bad.
@@Kabab Keep it at 2mm and go skinnier if you think the frame is too beefy. That'll cut some weight + better aerodynamic, should make a pretty noticeable difference.
I'm surprised no one had talked about the Lil Duece frame. I don't have one, so I can't really give an opinion, but it's made for extreme ultralight micros. Most people are flying those on 2S, so I suppose it might not be an apples to apples comparison. I have been trending away from 5 inch quads for about a year now. For me, the micros are just less stressful. They are cheaper, less dangerous, quieter, more places to fly, and just a ton of fun. They still don't have the power of a 5 inch quad, but I don't need to go 120 mph and wake up everyone in a half mile radius haha
awesome frame and setup. what kept me away from it is that it's kind of a full build. you definitely get much better performance still but the whole point of what I've done here is so I can directly transfer a brushless whoop onto this frame. Very minimal work.
I wonder how much adding a split or caddx turtle would kill this little guys performance. Maybe 2s would make up for the additional weight? Having the best possible "HD Whoop" is the next item on my FPV to do list.
I’m dying for you to have finished product man. Seriously dying. Every new upload referring to this thing I get sooo excited 😩 or even a finished product list so I can build it, AWESOME work on this thing man. Love your vids ❤️ and hearing you ramble about good quad info 🙃
After 4 years all theese intuitions led to hd micro quads with incredible specs.. I sometimes think about this: You created a new 'spot' in this hobby.. Not bad 😅
awesome video, if anyone has problems with this prop flying off just put a little (very little) bit of sewing thread in the hole as you push it on and trim off excess.
Very cool. I fly around a lot of small branches and leaves though so I think I kind of need hoops. Maybe not though. I need to try something like yours.
Saw that teaser Video today on FB and my initial thoughts were: That could be Kabap flying, without knowing it was actually you. I am very thankful that you provide your knowledge and skills to some manufacturer's, so that we (I!) can benefit from it. Thanks Dude. Happy flying!
I got to build one of these!!! I gave up on brushed for the same reason, I guess just loved the idea of the size. I have tried this kinda build a little while ago with some 16x16 boards which was a soldering nightmare, but I pushed thu it. And after ruining idk 3 fc, I actually got one to fly but with out fpv! Mehh! Nevertheless I loved the video and seeing the progress of this awesome little drone. I think I’m gunna try a 2s top mount version of this hehe
yeah building a full blown micro quad sucks. repairs are even worse. connectors for motors make the world simple. I'm working on a tiny hawk frame design that puts the batt on top where it should be.
Kabab FPV take a look at the parrot mambo battery configuration. You can get up-to 700 mah Anbee 3.7v 700mAh LiPo Battery 4pcs + Multi Charger Plate Combo for Parrot Minidrones Swing/Mambo/Airborne Cargo/Airborne Night/Hydrofoil/Jumping Race/Jumping Night Drone www.amazon.com/dp/B06ZZJLST6/ref=cm_sw_r_cp_api_i_98XiCbA8EHX9P But it’s the way the frame mounts the battery in the middle where The CG should be. That’s the most important thing about the configuration. These batteries also have no wires and don’t need a strap.
Wow!! This is Super, Bob!! Make them made it with adjustable camera angle, 1S. And maybe with 1s / 2s capability. With optional prop guards. With the nasty cam used here and a cool, and robust canopy. And way under 100€, and... I'm sold! Btw, the flights here are super cool, and better, for me, than the ones with 5" quads. Maybe cause it can fly in better locations, or maybe is really just the way it flies. Seems to have more grace. Merry Christmas!!!!!!!!🎄🎄🎄🎄🎄🎀🙋
when I started this hobby with with the hubsan x4 just before I bought my first 5", hubsan released a tri-blade prop, it was very good in preformance but flight time went down by like 10-15%. It might be something to try on these brushless versions
Preordered the trash can but maybe moving the electronic to a carbon fiber frame will be an option for the feature if the frame will break too often. I feel I can push so much more with this quad respect to a full size 5 inches. I usually fly in a tight space
Looks great !! I'd love to see this hit the $65 or so range. Hopefully it's ready here shortly. I'd love to have one for the yard. Although now 5" is viable in my yard 🤔
Bob, don't know if you have a crossfire module. I put a standard nano crossfire rx on my tiny hawk and it works very well. Don't need it for the long range but you do get a very reliable link and telemetry which allows the luascript to work. This adds about 1g to the weight. It might work equally well on this setup as long as the FC has a free uart and 5v output.
Yeah 1s can be great, my bamboo skewers frames work well on 1 and 2s even with 6500kv 1103 motors on 75mm props. I have a bunch of those props you used here and want to try this out, looks awsome.
I think that hd micro brushless is where it is at. They have come a tremendous way in even the last 6 months. Could you imagine having that thing with HD cam? Won’t be long. I own the original racerstar 0603 20000kv. I have 3 spares left. I built the rkh when it first came to life 18 months ago. Now look where we are at. I won’t own another brushed quad. Now these tiny brushless have bearings.
I fly allot of those little boss builds and they perform in a similar fashion. Those props you are dead on about how they handle and from my limited experience they take a beating but never fly as good as they did before the first crash. Lol. I use them when I can. When I can't use them I will use the smaller Nanoqx paddle style. They have some pretty freakish performance also.
Brooooo this is epic!!! I loved your original flying Prius and been in love with the idea ever since! With these brushless motors I was thinking just this!! Your amazing and you NEEEEEED to make this a product. If I could have found a frame I would have made this from my snapper 7
I was going to stick with 5'' but this looks like it going to be a very promising market for 2019.Can't wait to build one myself.more flight time means more practice more fun.And yes crossfire with some 600 mah batteries would be insane.I will be waiting and watching.550 mah on mob7 gets me 6 1/2 min flight already would love to just transfer it to see if I could get close to 11 min flights . Love the vids Thankyou.
Just figured I would make myself such a frame, and just change the mobula7 electronics between the whoop frame to the «Prius» frame in the summer, and whoop in the winter!
Remember BAT-100? It was 1s minimodel like this, but with stack, not one board. I'd had one, with blue, rebranded sunnysky motors, but it didn't perform well. Now I put Racestar 0703 19000KV motors on it and YES - this baby now rips :D Fullspeed just went too early, they had good idea, but they didn't have proper motors back then. Downside - you cant put ladybird prop on this frame, only hubsan- style
Dude... flying through those palm trees (in Santa Monica, I assume) is exactly like flying through those towers in the original star wars arcade game...oh the memories...
im still working on putting together something like this, but with a frame with interchangable CF propguards so you can fly indoors also. the main goal of build is to make it cheap as possible, including allround gear like charger, batteries, motor lifespan, cost of componets etc. because for example you can make a 5' quad or similar for about$150 but battery cost, esc cost, and everything that can broke is way more expensive with larger quads, and also largar quanity of mass sped up to higher rates make parts disintegration way easier unfortunately. so, no#1 rule: cheap, durable flying
Try the iFlight 0804 15kv on 1s & 56 or 66mm props. I use the Bat100 & SPC95 frames. These 0804's are on Amazon for $35 a set, kinda high but EXCELLENT quality.
I understand that POV. For me, building is a big part of the hobby. Anyway, I like your Prius and wish there were more frames like that available to purchase.
I ordered my Mobula7 by the end of October and it still didint arrived, it was my christmas present from me to me, buuuuuuuáááááá.... PS- When I grow up I want to fly half as good as you, mind blowing...
Yeah. Banggood sucks. I finally got my package in the mail yesterday after months, and it wasn't what I ordered. Why do we keep giving money to banggood?!?!
Damn i like the way you review the quads. Mad crazy info. They need to send you all the micros before they send to andy and albert cause you fly the shit out of them. I know you made that one but i mean in general. Nick flys indoors nice but you be killin it outdoors
Merry Xmas Bob! Can’t wait to build one of these. If my gate flying is any indication, no worries about hitting someone in the eye, I’ll clip the eyelashes and lids every time;-)
I've been looking to build one of these types but I have been waiting for Newbeedrones limitless frame if they ever even release it. I'd also use their hive16 stack
Nice... since I buy a whoop (UR65) I am wondering if I will still fly my 5" on the long term... Thoses whoops cost like nothing and they are very durable...And mostly I do need to drive 20min to a spot....But be aware that those prop cut skin like butter.. I get several scratches on my arms and fingers... will not happy to have in my face even a low speed I have design something similar board below the frame and cam on top fix on a tpu mount (USe tpu like spring to fix the postion of the cam).. The tpu mount comes quick heavy Did you increase tge speed of the video at the beginning?
small suggestions to the frame. make it 3x3 and 4x4 motor mount available, so people have option to put 1102, 1103 on it like people at flexrc do to their frames. for fc/esc mount, have options for whoop mount, 16x16mm, 20x20mm mount. so people can have options to put whatever they want onto the frame. but still it looks fine the way it is. now can you just sell the frame as it is with limited amount, so I can have something to work on ? please ps: and I appreciate that you put pid on here too. thank you for that.
I've made the 3 hole and 4 hole pattern compatible on the same frame before but it was a bit of a mess. I'd rather just have dedicated frame options for the two mountings
Omg.. tis micro stuff.. r getting.. better.. tis is really great.. since the brushed micro.. 😁👍tqs 4 tis awesome sharing.. bob.. i can't wait for the frame on sale.. very soooon..
probably not. I showed them the models similar to this I was building over a year ago. They fly the same as this and only weighed about 7g more. They sent me some awesome prototype motors and I sent them a built quad to try. They didn't pick it up and I doubt they'll bother now still. I'm working on putting together a kit for these little things because it's just too damn awesome not to.
Circumcised toothpick v2 or Stunted toothpick V2 or microscopick V2, whatever you name it, if you make it I'll take 2, that thing is awesome best 1s micro performance I've seen 👊😁
Have you thought about making a frame with carbon tubes in this size? Might help in further reducing weight and improving both durability and Aerodynamics?
Tubes will add huge complexity we don't need. For one thing, the motor mounts alone will add significant weight. This carbon frame is 4 grams. Hard to beat that.
I can print the tops out of tpu. Not much extra weight and pretty much indestructible to impact based on the ultra low mass of the aircraft. I will order a toothpick but for now really like the extra room on my old bat100 frame w/ 2s f4 stack.
This seems perfect for my needs! I can barely fly anywhere near me because of stupid aviation (jk fpv is my way to fly and I want to become a pilot) I would totally be up for helping make a frame if you want. I would just need some measurements and I think I make a ok frame.
I am with you on the excitement for these ultralight brushless whoops. I have the Mobula, Beta75x and Tiny Hawk. They are all much better than previous generation whoops. I have been able to fly them around people and buildings that I would never have considered with my bigger quads. Have you considered a build with the Caddx Turtle? I have already seen modded Mobulas and Beta75x's but something lighter and non-ducted looks even more promising. I know Diatone has the 239HD and there is a Tiny Leader that also uses the Turtle but perhaps your combo would be better in overall weight and durability eventually. Oh, getting a TBS Unify and Crossfire combo board would be awesome and something worth paying more for.
Kabab FPV have you considered using a NeeBeeDrone Bee Eye mount to solve your canopy problem? They’re nearly indestructible I’ve only every broken 1 in my two years of flying NDB products
These micro brusless sub 50g quads are the future. I have been flying FPV for 4 years. And the flying sites and public image have suffered. The sub micro quad changes all that. People look at it as a toy. They smile and laugh watching it fly. I hope you get with piroflip and design a sub 50g quad. FYI, I have a 1s whoop with a AOI Vfx/DVR. The video isn't great (VGA) but it's the next thing. A AOI Vtx/DVR 720p at under 6g with smart audio control 25-100mw output, would be the ticket.
I'm working on the frame but I've asked TBS to consider making a brushless whoop AIO 2S board with crossfire built in. With this kinda performance and flight time, you can really cover a LOT of ground. The super low output 2.4g stuff just doesn't cut it.
@@Kabab Here is the video I made.
ua-cam.com/video/K-x7bj4_b3k/v-deo.html
With this Vtx/DVR.
Wolfwhoop WT05-DVR AIO Micro Camera with DVR and 5.8GHz 25mW FPV Transmitter for FPV Quadcopter Drone www.amazon.com/dp/B076HHRKXW/ref=cm_sw_r_cp_apa_i_KBOiCbJC247EM
@@Kabab that will be awesome im still waiting to see your other frame pop up for sale i know you said around christmas
This is really close to my next dream project. I'm going for a micro with DVR, but I want to make it 2s like the Mobula (that is to say two 1s batteries in series)
Yes, yes yes yessssssssss!!!
I love this build!!! I also think this will be the future of FPV. Im sure in some years more powerful and tinier vtx’s fc’s and rx’x will come out and will improve the FPV experience while minimizing the risks to others.
Please don’t abandon this initiative. You can do much good to this segment of micro brushless
Thank you veeeeeery much for this video!!!!
That's some impressive flying, especially for a 1S powered tiny flyer. Seems like this design hits a massive sweet spot between power and efficiency. Respect!
I have learnt two things from this awesome video. Firstly I can fly this into someone’s eye and secondly they won’t hear it coming until it’s three feet from their face.... excellent!
The video that got me into toothpicks. 4 years later i now have 4 working 3" toothpicks, from 1s-3s, and 2 2s 2.5" toothpick (one on an OG apex toothpick frame).
love this build! hope you can bring your frame to production- as far canopy i can tell you by experience that the one on the Blodclash 75mm whoop is made of some flexible plastic that even after up-grades and crashing for 8 months-(me), it still has the original canopy, no breaks, no cracks!
This is the O.G brushless & I still love this 1S pick. Going to build one to fly around our unit complex without cutting anyone up. Makes me wonder if there's potential for a *featherpick*
I just built one from a snapper7 with those props I still had from trying to build the brushed Flying Prius and a quick 3D printed frame. Hovers under half throttle, really smooth for indoors on stock PIDs. Your PIDs seem super high, I'l try slowly increasing them outside. I have like 3mm of clearance between props and even less between props and the board. The stock canopy was too big, so I 3D printed a simple camera holder. 37.4g AUW
Yeah these pids are what I used to use on the brushed quad. Seems like the brush less is similar in that respect. I'm not sure if it has to do with the total lack of power or the tiny motors and large prop or something.
Please release this as a kit! With all parts but not built. The small and safe size is such a turn on for me! So many places i want to rip but cant because of people. Looking forward to it!
BTW, the Beecore F3 V1 Brushless does not have the motor plugs attached to the FC, but it does come with the plug connectors so you could easily mount them on the top or bottom of the board, and even to side. Not sure if this will help you routing the wires or not but I thought I would mention it. Of course, you could remove and reattach the plugs on most FCs but this one would save a few steps.
I just got some mini race wire made. Looks like a little soldering will be needed after all. But the final result will be much better
Kabab FPV - That’s awesome! The evolution of this quad design and implementation is just fascinating. Thank you for sharing your spark of genius.
I´m very impressed by your result, never think that this 0703 motor are able to run the 66mm propeller, this will save me a lot of weight, I use these propellers in 1103 15000KV motors in 1S and they are great, slim-x frame. Using this motors I can shave 8 to 10g of my build. Thanks.
Saw a beta75x fly yesterday, and that thing rips! These whoops are coming into a completely new breed, and i want one!
On a completely different note, i see rotor riot may be exploring a marketable fpv hex! Hexacopters are a ton of fun to fly and need to be more available to this hobby!
Whoop hex, I'm in!!
I have never seen so much good 1S micro brushless quads in my entire FPV life than over the past four months lol
They just keep getting better and better lol
Looking forward to the final frame :D
I had a hubsan that used those props or something similar, very elliptical blades. They do work surprisingly well on 1s. There are bull nose props that I put on that worked almost better but resonate a bit. I ordered a trashcan and might order a second to transfer the parts over to your frame. Or maybe I'll 3d print a frame without prop guards.
Unfortunately the Trashcan motors and camera aren't very good. The vtx is also bigger than it needs to be. 😑
I'm seeing mixed reviews on all the 2s micros. Hard to know which to choose. The mobula 7 looks nice as does the emax but it's like every reviewer has a different Achilles heel for each of them.. Perhaps I'll get an emax to transfer the parts, sure it's 1s but atleast having different props will help with the turtle mode issue. Guess I'll make a decision on a second micro after I recieve my trashcan which has been shipped.
@@danieldimitri6133 I would recommend everyone skip the 2S whoops. If you want one, choose the parts and build it yourself. You'll get a MUCH better quad. The Beta 0802 motors with crazybee F4 and the AIO cam from the Mobula with a Beta 75mm frame and the HQ 40mm prop. This will give you the best performance for sure.
LOVE how you just keep pushing the envelope on this stuff, Roogi. Good work, mate. Don't forget to take some time for you and family this holiday season!
If you wanted a silent micro, then looks like we're almost there. Thanks Kabab!
This is as silent as a quad could possibly be. You can fly it in a room and the person one room over would never hear it unless you ran into something.
@@Kabab That's unbelievable... It just needs a better camera and better protection for the camera. Your channel is gold btw.
@@SPL-6 no need for any protection. It only weighs 39g. It's really hard to break anything with that low weight. The frame is total overkill at only 4.5g. It's 2mm carbon. The caddx eos may be a better camera but that's the sore spot for these things. The camera is just bad.
@@Kabab Keep it at 2mm and go skinnier if you think the frame is too beefy. That'll cut some weight + better aerodynamic, should make a pretty noticeable difference.
I'm surprised no one had talked about the Lil Duece frame. I don't have one, so I can't really give an opinion, but it's made for extreme ultralight micros. Most people are flying those on 2S, so I suppose it might not be an apples to apples comparison.
I have been trending away from 5 inch quads for about a year now. For me, the micros are just less stressful. They are cheaper, less dangerous, quieter, more places to fly, and just a ton of fun. They still don't have the power of a 5 inch quad, but I don't need to go 120 mph and wake up everyone in a half mile radius haha
awesome frame and setup. what kept me away from it is that it's kind of a full build. you definitely get much better performance still but the whole point of what I've done here is so I can directly transfer a brushless whoop onto this frame. Very minimal work.
@@Kabab very good point. I love the idea and simplicity. Emax is a great company to get it done for you.
@@sjcajw7 Lil Duece is my favorite quad, hands down. Even feels better than my M7. With a top mount cam you can even run 3" props on it!
I wonder how much adding a split or caddx turtle would kill this little guys performance. Maybe 2s would make up for the additional weight? Having the best possible "HD Whoop" is the next item on my FPV to do list.
That thing flies better than any 1S I have ever seen. Amazing.
Very cool and the flight looks very stable. Can't wait to see the final product.
Great content! Just finished my first babytooth build with the walksnail 1s vtx, it's unreal ❤
I’m dying for you to have finished product man. Seriously dying. Every new upload referring to this thing I get sooo excited 😩 or even a finished product list so I can build it, AWESOME work on this thing man. Love your vids ❤️ and hearing you ramble about good quad info 🙃
Amazing flying..Really like watching you fly these little rippers.
This quad is sweet. And the flight spots as well
After 4 years all theese intuitions led to hd micro quads with incredible specs.. I sometimes think about this: You created a new 'spot' in this hobby.. Not bad 😅
Funny, I was just watching your old prius video :)
awesome video, if anyone has problems with this prop flying off just put a little (very little) bit of sewing thread in the hole as you push it on and trim off excess.
Thankfully the prop seats very firmly and I measured these shafts at 0.8mm so not even a full 1mm thick
Very cool. I fly around a lot of small branches and leaves though so I think I kind of need hoops. Maybe not though. I need to try something like yours.
cant wait to see how these small quads develop
Awesome! I'm thankful that you gave that setup a try because I think you might be onto something big there.
I just pulverized my 2nd Mobula7 V1 frame into about 5 pieces, I would gladly try one of these frames, lol. I'm ordering a batch of magic props.
Flying Prius gets a big bro! Thanks, Bob!
Saw that teaser Video today on FB and my initial thoughts were: That could be Kabap flying, without knowing it was actually you.
I am very thankful that you provide your knowledge and skills to some manufacturer's, so that we (I!) can benefit from it.
Thanks Dude.
Happy flying!
I got to build one of these!!! I gave up on brushed for the same reason, I guess just loved the idea of the size. I have tried this kinda build a little while ago with some 16x16 boards which was a soldering nightmare, but I pushed thu it. And after ruining idk 3 fc, I actually got one to fly but with out fpv! Mehh! Nevertheless I loved the video and seeing the progress of this awesome little drone. I think I’m gunna try a 2s top mount version of this hehe
yeah building a full blown micro quad sucks. repairs are even worse. connectors for motors make the world simple. I'm working on a tiny hawk frame design that puts the batt on top where it should be.
Kabab FPV take a look at the parrot mambo battery configuration. You can get up-to 700 mah Anbee 3.7v 700mAh LiPo Battery 4pcs + Multi Charger Plate Combo for Parrot Minidrones Swing/Mambo/Airborne Cargo/Airborne Night/Hydrofoil/Jumping Race/Jumping Night Drone www.amazon.com/dp/B06ZZJLST6/ref=cm_sw_r_cp_api_i_98XiCbA8EHX9P
But it’s the way the frame mounts the battery in the middle where The CG should be. That’s the most important thing about the configuration. These batteries also have no wires and don’t need a strap.
Description says 0803 motors, link is to 0703 Racestars. The Happymodel 0802 motors give equal or more power of 0703, yet have much better efficiency.
Fixed, thanks.
Wow!! This is Super, Bob!!
Make them made it with adjustable camera angle, 1S.
And maybe with 1s / 2s capability.
With optional prop guards.
With the nasty cam used here and a cool, and robust canopy.
And way under 100€, and...
I'm sold!
Btw, the flights here are super cool, and better, for me, than the ones with 5" quads. Maybe cause it can fly in better locations, or maybe is really just the way it flies. Seems to have more grace.
Merry Christmas!!!!!!!!🎄🎄🎄🎄🎄🎀🙋
when I started this hobby with with the hubsan x4 just before I bought my first 5", hubsan released a tri-blade prop, it was very good in preformance but flight time went down by like 10-15%. It might be something to try on these brushless versions
Can you add the throttle indicator to your OSD? It can help us to understand the permormance of quad.
good point. Will do in the future.
yeah...
@@Kabab As an addition to that, could you say how much throttle % still hover takes?
There's something special about tiny brushless quads. I love it thanks Bob 😁👍👍
Will keep an eye out for the frame, looks real nice to fly for the size. Also thanks reminding us to floss, love it!
Ok you got my attention. Please make this available. I need one.
Preordered the trash can but maybe moving the electronic to a carbon fiber frame will be an option for the feature if the frame will break too often. I feel I can push so much more with this quad respect to a full size 5 inches. I usually fly in a tight space
Looks great !! I'd love to see this hit the $65 or so range. Hopefully it's ready here shortly. I'd love to have one for the yard. Although now 5" is viable in my yard 🤔
Ohhh wow this made me excited! Really looking forward to a 2s Version😉😍
Pls make a Kabab FPV-ARF or something Like that. I would pay the money;)
Bob, don't know if you have a crossfire module. I put a standard nano crossfire rx on my tiny hawk and it works very well. Don't need it for the long range but you do get a very reliable link and telemetry which allows the luascript to work. This adds about 1g to the weight. It might work equally well on this setup as long as the FC has a free uart and 5v output.
I'm more of a fan of keeping it dead simple and not adding parts.
Yeah 1s can be great, my bamboo skewers frames work well on 1 and 2s even with 6500kv 1103 motors on 75mm props.
I have a bunch of those props you used here and want to try this out, looks awsome.
nigelsheffield
Make 1s great again !
😆😆😆😆😆😆😆
I think that hd micro brushless is where it is at. They have come a tremendous way in even the last 6 months. Could you imagine having that thing with HD cam? Won’t be long. I own the original racerstar 0603 20000kv. I have 3 spares left. I built the rkh when it first came to life 18 months ago. Now look where we are at. I won’t own another brushed quad. Now these tiny brushless have bearings.
Hi Kabab,
I was thinking about building the very same... and you did it! Now this is Christmas:) Many thanks :))
so nice! This will get more people in the hobby: cheap-tiny-durable-powerful!!!!
I fly allot of those little boss builds and they perform in a similar fashion.
Those props you are dead on about how they handle and from my limited experience they take a beating but never fly as good as they did before the first crash. Lol. I use them when I can. When I can't use them I will use the smaller Nanoqx paddle style. They have some pretty freakish performance also.
I'd love one. Merry Christmas Bob.
P.S. loved your comment on my floss and glue idea.
I need the frame!
Brooooo this is epic!!! I loved your original flying Prius and been in love with the idea ever since! With these brushless motors I was thinking just this!! Your amazing and you NEEEEEED to make this a product. If I could have found a frame I would have made this from my snapper 7
working on the best way to transfer a typical whoop. Gotta make the frame as simple as possible for users.
@@Kabab Do the emax bnf version. with prop guards also in the box. period.
I was going to stick with 5'' but this looks like it going to be a very promising market for 2019.Can't wait to build one myself.more flight time means more practice more fun.And yes crossfire with some 600 mah batteries would be insane.I will be waiting and watching.550 mah on mob7 gets me 6 1/2 min flight already would love to just transfer it to see if I could get close to 11 min flights . Love the vids Thankyou.
I'm working on it as fast as I can
WoW bob, this is amazing! I want this with the internals of the trashcan!
I'll be testing that as soon as I get my trashcan
Kabab FPV awesome! Keep us updated. Love this stuff. Btw are the screwholes for the 0703 and 0603, 0803 etc. The same distance?
Just figured I would make myself such a frame, and just change the mobula7 electronics between the whoop frame to the «Prius» frame in the summer, and whoop in the winter!
Remember BAT-100? It was 1s minimodel like this, but with stack, not one board. I'd had one, with blue, rebranded sunnysky motors, but it didn't perform well. Now I put Racestar 0703 19000KV motors on it and YES - this baby now rips :D Fullspeed just went too early, they had good idea, but they didn't have proper motors back then.
Downside - you cant put ladybird prop on this frame, only hubsan- style
Awesome build! Can’t wait to see the video on 2s!👍🏽🤙🏽😃
Was that Santa Monica?
Yep
Dude... flying through those palm trees (in Santa Monica, I assume) is exactly like flying through those towers in the original star wars arcade game...oh the memories...
im still working on putting together something like this, but with a frame with interchangable CF propguards so you can fly indoors also.
the main goal of build is to make it cheap as possible, including allround gear like charger, batteries, motor lifespan, cost of componets etc.
because for example you can make a 5' quad or similar for about$150 but battery cost, esc cost, and everything that can broke is way more expensive with larger quads, and also largar quanity of mass sped up to higher rates make parts disintegration way easier unfortunately.
so, no#1 rule: cheap, durable flying
Write this is the issue and this is why I have tried to focus on using the whoop drivetrains that everybody's already has
I love little 1s flying machines. Keep it up! Merry Christmas.
These are probably way overkill but I'm building 1 with the BBB 0806 motors its going to b the moon dancer lol! Love your builds bro keep it up!
I would recommend an 1103 over anything narrower
Whoooo! I just want to say that I want one. Or two or three, but at least one.
Try the iFlight 0804 15kv on 1s & 56 or 66mm props. I use the Bat100 & SPC95 frames. These 0804's are on Amazon for $35 a set, kinda high but EXCELLENT quality.
The problem with those options is that they don't come with JST connectors on them so they're annoying to solder up.
I understand that POV. For me, building is a big part of the hobby.
Anyway, I like your Prius and wish there were more frames like that available to purchase.
Can't wait! Merry Christmas Bob 🎅
I ordered my Mobula7 by the end of October and it still didint arrived, it was my christmas present from me to me, buuuuuuuáááááá....
PS- When I grow up I want to fly half as good as you, mind blowing...
Yeah. Banggood sucks. I finally got my package in the mail yesterday after months, and it wasn't what I ordered. Why do we keep giving money to banggood?!?!
I'm in europe (Portugal) and theres not many options here, shipping from the US is faster but way more expensive...
Can't wait to get one of those. It looks peaty amazing!!!
Looks like a Bat100 awesome flying 👍
My trashcan is on the way cant wait to try it. Have you seen the frames tomoquad has made for these whoop parts it looks pretty good.
That frame it going to be way to heavy for a 1s quad.. but its made for a 2s anyways
Damn i like the way you review the quads. Mad crazy info. They need to send you all the micros before they send to andy and albert cause you fly the shit out of them. I know you made that one but i mean in general. Nick flys indoors nice but you be killin it outdoors
yea
love it i built one out of my betafpv meteor 75 lite brilliant video followed
Nice at least I can use my UR65 guts. As soon as the frame is available it's done.
Merry Xmas Bob! Can’t wait to build one of these. If my gate flying is any indication, no worries about hitting someone in the eye, I’ll clip the eyelashes and lids every time;-)
I have an eachine qx95s, like it a lot. But now I need this setup.
I've been looking to build one of these types but I have been waiting for Newbeedrones limitless frame if they ever even release it. I'd also use their hive16 stack
Looks fun! Looking forward to seeing how you will improve upon this. Whoop revolution! 😎👍
Nice... since I buy a whoop (UR65) I am wondering if I will still fly my 5" on the long term... Thoses whoops cost like nothing and they are very durable...And mostly I do need to drive 20min to a spot....But be aware that those prop cut skin like butter.. I get several scratches on my arms and fingers... will not happy to have in my face even a low speed
I have design something similar board below the frame and cam on top fix on a tpu mount (USe tpu like spring to fix the postion of the cam).. The tpu mount comes quick heavy
Did you increase tge speed of the video at the beginning?
So awesome!!! Happy New year's quad man!
small suggestions to the frame. make it 3x3 and 4x4 motor mount available, so people have option to put 1102, 1103 on it like people at flexrc do to their frames. for fc/esc mount, have options for whoop mount, 16x16mm, 20x20mm mount. so people can have options to put whatever they want onto the frame. but still it looks fine the way it is. now can you just sell the frame as it is with limited amount, so I can have something to work on ? please
ps: and I appreciate that you put pid on here too. thank you for that.
I've made the 3 hole and 4 hole pattern compatible on the same frame before but it was a bit of a mess. I'd rather just have dedicated frame options for the two mountings
I can't find frame that I can use this prop. and I have bought many. i'm in need of this frame.
I just bought a eachine trashcan. it'll take a month to come. hope to have your frame to try out.
Wow, lots of videos, must be Christmas :D
At that size, even a 3D printed frame may be a viable option. Maybe I should try building one :)
@Kebab FPV Nice man! Bring on that frame, been waiting for a decent frame for a parts donation from my Snapper 7. Cheers!
Omg.. tis micro stuff.. r getting.. better.. tis is really great.. since the brushed micro.. 😁👍tqs 4 tis awesome sharing.. bob.. i can't wait for the frame on sale.. very soooon..
Well if emax makes something similar then im going to have to get one. Loving all these vids lately
probably not. I showed them the models similar to this I was building over a year ago. They fly the same as this and only weighed about 7g more. They sent me some awesome prototype motors and I sent them a built quad to try. They didn't pick it up and I doubt they'll bother now still. I'm working on putting together a kit for these little things because it's just too damn awesome not to.
Circumcised toothpick v2 or Stunted toothpick V2 or microscopick V2, whatever you name it, if you make it I'll take 2, that thing is awesome best 1s micro performance I've seen 👊😁
Have you thought about making a frame with carbon tubes in this size? Might help in further reducing weight and improving both durability and Aerodynamics?
Tubes will add huge complexity we don't need. For one thing, the motor mounts alone will add significant weight. This carbon frame is 4 grams. Hard to beat that.
I thought you said these tiny quads just don't do it for you? This is spectacular brother.
I never expected this incredible level of performance
Agreed, I will be building one for sure.
@@mrmikojo5738 want it bnf. period.
YES THE PRIUS IS BACK :D
Make this a Thing, make it Long range, make it Full HD, make it cheap. This is the Future
I already asked TBS to make an AIO whoop board with crossfire but I doubt they will bother.
Yes yes yes yeeeeessssssssss!
I love this build!!!
Thanks soooooooo much for sharing this!!!
Please make this a product and take my money! This (and the flights) look so good.
I can print the tops out of tpu. Not much extra weight and pretty much indestructible to impact based on the ultra low mass of the aircraft. I will order a toothpick but for now really like the extra room on my old bat100 frame w/ 2s f4 stack.
This seems perfect for my needs! I can barely fly anywhere near me because of stupid aviation (jk fpv is my way to fly and I want to become a pilot) I would totally be up for helping make a frame if you want. I would just need some measurements and I think I make a ok frame.
Also works great for my cheap Budget
I am with you on the excitement for these ultralight brushless whoops. I have the Mobula, Beta75x and Tiny Hawk. They are all much better than previous generation whoops. I have been able to fly them around people and buildings that I would never have considered with my bigger quads. Have you considered a build with the Caddx Turtle? I have already seen modded Mobulas and Beta75x's but something lighter and non-ducted looks even more promising. I know Diatone has the 239HD and there is a Tiny Leader that also uses the Turtle but perhaps your combo would be better in overall weight and durability eventually. Oh, getting a TBS Unify and Crossfire combo board would be awesome and something worth paying more for.
Unfortunately the turtle weighs as much as this entire quads AUW. It would fly with 2S but not so good and hard to fit.
Thats awesome for 1s. Where the frame from?
Ducts, ducts make that difference. You can't fly a thiny whoop props whitout the frame. Same shing as in CineWhoop :)
HOLLY CRAP THIS IS SO SMALL & FAST I LOVE IT!!!!!!!!!!! I NEED ONE!
GREAT FLYING
👍😀👍
Flys like my Fullspeed Bat 100 same concept
Top freestyle, fast and smooth 🖒
Kabab FPV have you considered using a NeeBeeDrone Bee Eye mount to solve your canopy problem? They’re nearly indestructible I’ve only every broken 1 in my two years of flying NDB products
Spray some flex seal in the canopy. They wont crack like the stock canopy