Does the seat belt light come on when first turning on the ignition? If light comes on but goes off after a few seconds it could be this same problem with the switch inside of buckle or it could also be with the connection point/harness under the driver’s seat.
This one needs a scanner able to connect to Airbag/SRS system. The auto parts stores will only clear the engine computer codes for the check engine light.
This car the airbag light would turn on and off on its own. Its possible after you fix and give some time the light might turn off (system sees there is no longer a problem), just not 100% sure.
This ended up being a 3-6 code for me, later on I scanned again and it became a 9-3. 3-6 codes are just a range of possible codes due to poor ground or some other electrical fault that the computer module cant discern. Honda had no idea, I was stumped too. Just clear it and scan again until it becomes a meaningful code.. 3-6 ... thats just what it means, its in the service manual if you search deep... you're welcome.
This is an excellent video of a thorough repair. Thank you sir!
Thank you. I took mine apart and cleaned it. So far, it is working better!!
muchas gracias por tu alluda 👏👏👏👍
Wow thanks for the video. I am going to try this. Would be great if this fixed my airbag light
Thank ypu
What type of screw driver did you use, seems like mine has a small nipple in the center to stop a regular
Yes, you cannot use a regular TORX bit. It is a "Tamper TORX" bit, these have the hole in center to allow for removal.
Thank you for the comment.
Bro but my Honda reborn light of seat belt is not working so what’s the problem tell me
Does the seat belt light come on when first turning on the ignition?
If light comes on but goes off after a few seconds it could be this same problem with the switch inside of buckle or it could also be with the connection point/harness under the driver’s seat.
Do I need a scan tool to reset the code, or can an auto parts store do it?
This one needs a scanner able to connect to Airbag/SRS system. The auto parts stores will only clear the engine computer codes for the check engine light.
I’m gonna do this method to my 05 civic 4 Dr lx. I don’t have a scanner with airbag srs capabilities, can I do this without it?
This car the airbag light would turn on and off on its own. Its possible after you fix and give some time the light might turn off (system sees there is no longer a problem), just not 100% sure.
@@thatonecarguy5201 Ok thanks I'm gonna do it anyways. I just don't feel like spending more money on another scanner.
This ended up being a 3-6 code for me, later on I scanned again and it became a 9-3. 3-6 codes are just a range of possible codes due to poor ground or some other electrical fault that the computer module cant discern. Honda had no idea, I was stumped too. Just clear it and scan again until it becomes a meaningful code.. 3-6 ... thats just what it means, its in the service manual if you search deep... you're welcome.