Use a wood block the size of a shoe brush to sand. Do not peel off the required length of the tape...stick about an inch and then apply tape...use an old credit card to spread...and finally rub down with a cloth. And, as David explained start from TE with quarter in overlap and end at TE again.... shingles are similar to our clay roof tiles...:)👍
5mm bamboo stick is best because very lightweight and easily available, aluminum tube 5mm , or aluminum T shape But you put bamboo stick this is my final experiment and best 👍
Wood from local shop this wood use in door , string from guiter shop No. 0 or 1 Check my hot wire cutter building video ua-cam.com/video/uOrAqNcMyqM/v-deo.html
some info. pretty good work. at 13:25, the main spar Should be located at THIRTY percent of chord. the material of the main spar was POORLY chosen; and will not be, very, resistant to bending. when covering a wing with strips, think of a shingled roof. start at capping/wrap-around strip at the trailing edge and proceed forward. then, apply a capping/wrap-around strip, at the leading edge. cheers googletranslate
@S. Mesut He doesn't need to make a video, he's just explained it perfectly well in one paragraph. If you can't follow those simple instructions ... get another hobby!
I don't know bro, because local shop tell me is this 0 size Isase patala guitar me wire nhi ata hai, sabse patala wire bol kar lelo kam ho jayega High quality ka le a jo 20-25 rs ka hoga nhi to jaldi hit hokar tut jayega
When the plane is in the air, soft wings tend to bend upward ('U' shape). Think sharp aluminium trying to get out of thin plastic tape. Aerodynamic efficiency is still the same if you cover the rod properly
Use a wood block the size of a shoe brush to sand. Do not peel off the required length of the tape...stick about an inch and then apply tape...use an old credit card to spread...and finally rub down with a cloth. And, as David explained start from TE with quarter in overlap and end at TE again.... shingles are similar to our clay roof tiles...:)👍
Not sure if you are Jewish, but recognize the Dradle song - but anyways great accompaniment. Thanks for sharing, the info.
You tarmocol cutter are so cool👌
Thanks
Wow, exelent work, you video was inspired me to make the same cut tool with a guitarr wire, now i can obtain wings with clean cut and perfec finished.
Thank you
Thank you! It helps me too much.
Welcome
Really enjoyed watching this.
bro i liked that
Thanks bro it was for you 😁
good job
Thanks
Nice wing bro
Thanks bro
Tharmacoll cutter kayse bnaya h video bnao
Banaya h channel check karo
Bhai plane ke liye airfoil kaha se purches karen pls bhai reply dena pls
Tqsm was so helpful
Welcome
show !!!!!!!!
How hot should we keep the wire ? I see fumes coming out of your wire ...
12volt power with 1meter wire , you need to check manually , you put Thermocol on the wire they cut slowly
Interesting : I did the exact same wing except with a carbon fiber spar and flaps. How much does yours weight ?
I can't weight, but very light
wait doesent you have a weight or you dont ovn a weight
I don't have a weighing machine
What is the cost of the thermacol block
Rs. 100 Different place Different Price
What type of material should I use for spars. Please tell me brother.
5mm bamboo stick is best because very lightweight and easily available, aluminum tube 5mm , or aluminum T shape
But you put bamboo stick this is my final experiment and best 👍
Bro aap hd thermocol kahan se purchase krte ho?
Fish box , market me jake pata karo jaha par fish milta h
@@INDIRC1 Thanks bro
Is the spar aluminium tube/rod ? Where can I buy it ?
It is just a U squre shaped aluminum , Aluminum shop, they are selling window panel
can i use fish box material to make wings.
Yes
The camera made my head hurt! Although how did you make the hotwire?
Wood from local shop this wood use in door , string from guiter shop No. 0 or 1
Check my hot wire cutter building video
ua-cam.com/video/uOrAqNcMyqM/v-deo.html
some info. pretty good work. at 13:25, the main spar Should be located at THIRTY percent of chord. the material of the main spar was POORLY chosen; and will not be, very, resistant to bending. when covering a wing with strips, think of a shingled roof.
start at capping/wrap-around strip at the trailing edge and proceed forward. then, apply a capping/wrap-around strip, at the leading edge. cheers googletranslate
If you know that much please make full tutorial and share it
@S. Mesut He doesn't need to make a video, he's just explained it perfectly well in one paragraph. If you can't follow those simple instructions ... get another hobby!
@S. Mesut So do I, I built and own a Vans RV-6A! Check out my channel for the first taxi tests!
@S. Mesut .... David explained it perfectly...and since you fly the 'real' thing, you are now the high and mighty 😂😂
bhaii apneee foam cutter ka vidio nii dala
3-4 din me dal dunga bro
Can i use this method to make hot wired flying wing
Yes
Very nice
Where you from bro
Thanks
Bro where did u get the string for the foam cutter
Guitar string from Guitar shop
Where to gate that faom board?
Stationary shop or insulation shop
What is the thickness of wire of that foam cutter?
0 (zero) size
@@INDIRC1 in guage??
I don't know bro, because local shop tell me is this 0 size
Isase patala guitar me wire nhi ata hai, sabse patala wire bol kar lelo kam ho jayega
High quality ka le a jo 20-25 rs ka hoga nhi to jaldi hit hokar tut jayega
@@INDIRC1 ok
Bhai is wing ko kaun kaun se plane mein use kar sakte hain please reply
Sabhi Plane ke liye alag use hota hai
Vari eage
Which foam are you use
HD Thermocol Seet
Online ya shop
Stationary Shop
Breath ,length or height
Kya hai
Hello sir, I have a question. Do I need to calcute where I need to do the thickness spot and how thick do I need to do it?
If your wing chord is 10 inch then thickness need 1 inch
Plz tell me the sand paper no. that you have used
220
@@INDIRC1 thank you 👍👍👍
Welcome 🤗
Dimensions kya h bhai iski
42x7 inch
@@INDIRC1 3 feet lamba 7inch choda
@@INDIRC1 or mota kitna rhka h
@@INDIRC1 bhai mere pass 1000kv ki motor h vo chale gi na aircraft m
0.8 inch
Teribile music, and,...Why cut upper part for reinforcement?
Yes, Wing make strong and stable flight
@@INDIRC1 yes,sure. But should cut in lower part, keeping nice upper surface for best aerodynamics.
No, Cut upper side
When the plane is in the air, soft wings tend to bend upward ('U' shape). Think sharp aluminium trying to get out of thin plastic tape. Aerodynamic efficiency is still the same if you cover the rod properly
@@INDIRC1 ok,your version, also have reason. But, if use good glue, can cut lower side, and do not damage airfoil...
Bad music
Bro which wire you had used?
Guitar Strings no. 1 or 0 size is good
From local guitar shop
20rs.