Ok... I'm excited! I want one! I'd have put a link in your description so I can run there and throw some money at ya while I'm still excited!! Missed opportunity is all. I guess I'll go hunting in Google and try to find ya. Lol!! Great explanation! Thank you!!
I have a machine that only one company makes clutch parts for. So of I may ask how many mm should I shave off my 0rimary sheaves going from a 26" to a 30" tire. I was going to machine 2mm off each side. I just wanna lower my overall gear not gain speed.
My 2006 rhino 660, belt is riding high on the front sheaves (blue spring) & 27x11-r14 rear tires..... Any help on how to fix this or what to buy to correct this ?
Thanks for video. Got a quick question. Out of your experience, what causes the back have of primary, with cooling fins....what would cause rubbing against wet clutch casting? Thanks
@@WVHotRodRhino no. It had the cheaper style sheave on it ,(where the splines are at most 1/8" thick)....that pressed insert was not on it at all. Evidently when the original owner had it worked on, they lost the insert or knocked it put and forgot to put it or press it back in??? I have a HiSun 600cc ATV and robbed the sheave off it. It pulls great now!
2019, he's still saying you can't mill the rim off completely on the 850 cvt because it will damage the sheaves. JBS has been running them since 2017 with zero issues.
got a clutch kit from jbs and gained 10 mph and loads of torque. well worth the money. James at jbs is super helpful with any questions . I called him several times while installing the kit and he was very knowledgeable which made the job much easier. JBS all the way!!
Ordered my JBS kit for my 17 Grizzly 700 a while back, the guy was super pleasant to deal with. He gave me a discount, and also dealt with all my questions and numerous phone calls until I made up my mind. I love this guy, and his products. The other guys suck, and its pretty clear if you do your research. I love this video, nothing like some good ol' honest truth. JBS! Buy the best, Fuck the rest!
I've got a 2012 arctic cat wildcat 1000 that has a set up like this and I would like to have better bottom end. Do you do work to arctic cat or are you interested in trying to do it for me. I have bought and extra one because I've been trying to find someone that does this type of work.
I ordered a jbs extreme sheave for my kodiak 17 700. I have a 1.5mm shim also. Is it going to tear my belt up or are you saying it’s fine to run a shim?
just put another primary clutch on my rhino 660 the belt is not all the way up on the secondary and when I hit the gas the primary doesn't seem the move in like it should but the rhino moves as soon as I hit the gas is there a problem?
Hunterworks1 ....did you not watch the vid?? this is not a comparison cause there is none... im calling you out on your junk but you dont have a clue just like with sheaves...
about 2 years ago, I got involved in sxs and like everyone else, wanted to learn about free/cheap mods. I found some Hworks videos including the one shown and some "technical papers". First, let me say that I know this is a grassroots sport and many products evolved thanks to good ole tinkering and trial & error... But, as a mechanical engineer, listening to the Hworks talk in terms of absolutes yet saying "I guess" about everything made me cringe. Good thing he don't build bridges. I find your products and descriptions much more intriguing, valid, and descriptive. This is not to say yours is as technical as say Yamaha's own engineering team, but everything described is more recognized and generally accepted. good luck to you sir, and one day I will be a customer.
It's good information, but I find this feud quite unprofessional actually since you used to call Hunterworks Inc for advise when you first started machining sheaves.
ZipTy ..there is no feud.. showing facts..what it was is i bought his junk and had to fix it myself..i wouldnt have had to make my own if he knew wtf he was talking about...so take your unprofessional shit and stick it...i guess i should set back and let him call me out and feed people the wrong info to sell his junk...not gonna do it
@@WVHotRodRhino wow just found this video better late than never i guess .......if the parts are better and the customer service is as good as ive read then i dont see it as unprofessional. looks more to me like your proud of your work and the r&d you put in to make it the best you can. id be mad as hell if someone was selling shit that didnt work as well as mine and telling everyone they were the best. anyway i will be calling after the last ride of this year to order a full kit for my 2012 grizzly 700 im not very happy with the 1.5 shim and epi gold spring and 29.5 outlaw 2s. needs more low end seems to me its really hard on the wet clutch now but its ok after about 6 to 8 mph
@@ethanray9123 it takes a lot to figure this stuff out and then the other companies copy you and try to claim they did it so I put these videos out there just like you said to show the hard work that we put into this to be the best... thanks for noticing.. just let me know when you're ready and we'll get you fixed up with a quality product
how could you be any more unprofessional?? I would think if your products where that much better they would speak for themselves and you wouldn't have to make a ridiculous call out video.
they do that too..alba,benchmark,racers edge and 120 more dealers carry our sheaves for a reason...its info for people who dont know...some people that was getting ready to spend money else where thanks me for the vid...thanks for your opinion..
Thanks for the great video. JBS has always been a great company to deal with both before and after the sale.
love my jbs clutch kit. Gained 10 mph and loads of torque. No complaints here.
Ok... I'm excited! I want one! I'd have put a link in your description so I can run there and throw some money at ya while I'm still excited!!
Missed opportunity is all. I guess I'll go hunting in Google and try to find ya. Lol!! Great explanation! Thank you!!
I have a machine that only one company makes clutch parts for. So of I may ask how many mm should I shave off my 0rimary sheaves going from a 26" to a 30" tire. I was going to machine 2mm off each side. I just wanna lower my overall gear not gain speed.
My 2006 rhino 660, belt is riding high on the front sheaves (blue spring) & 27x11-r14 rear tires..... Any help on how to fix this or what to buy to correct this ?
Hi JBS is there anything i can do for a ys 400 yardsport clutch ?
What kinda of performance will o get out of putting on one of your sheaves ?
Thanks for video. Got a quick question. Out of your experience, what causes the back have of primary, with cooling fins....what would cause rubbing against wet clutch casting? Thanks
Splines are stripped in that sheave most likely.do the splines go all the way through the center
@@WVHotRodRhino no. It had the cheaper style sheave on it ,(where the splines are at most 1/8" thick)....that pressed insert was not on it at all. Evidently when the original owner had it worked on, they lost the insert or knocked it put and forgot to put it or press it back in??? I have a HiSun 600cc ATV and robbed the sheave off it. It pulls great now!
2019, he's still saying you can't mill the rim off completely on the 850 cvt because it will damage the sheaves. JBS has been running them since 2017 with zero issues.
I have a 2008 yamaha rhino 700 what kind of performance increase would I get
got a clutch kit from jbs and gained 10 mph and loads of torque. well worth the money. James at jbs is super helpful with any questions . I called him several times while installing the kit and he was very knowledgeable which made the job much easier. JBS all the way!!
Jeez. If I had to buy one of these cornfangled sheave plates there based on looks of these 2 fellows I'd have to go with the JBS
Ordered my JBS kit for my 17 Grizzly 700 a while back, the guy was super pleasant to deal with. He gave me a discount, and also dealt with all my questions and numerous phone calls until I made up my mind. I love this guy, and his products. The other guys suck, and its pretty clear if you do your research. I love this video, nothing like some good ol' honest truth. JBS! Buy the best, Fuck the rest!
I've got a 2012 arctic cat wildcat 1000 that has a set up like this and I would like to have better bottom end. Do you do work to arctic cat or are you interested in trying to do it for me. I have bought and extra one because I've been trying to find someone that does this type of work.
How can we get a sheave and the weights
I ordered a jbs extreme sheave for my kodiak 17 700. I have a 1.5mm shim also. Is it going to tear my belt up or are you saying it’s fine to run a shim?
Don't run that much with our sheave...it could get into the belt cover.Run .5 with the sheave.1.5 on stock sheave is fine
WVHotRodRhino that’s what I was thinking. Thanks brotha
How long do y’all normally take to ship? It says priority and I ordered on the 3rd.
I've run both sheaves and the JBS is the better sheave. Hands down.
Great info !!! Great products !!!
just put another primary clutch on my rhino 660 the belt is not all the way up on the secondary and when I hit the gas the primary doesn't seem the move in like it should but the rhino moves as soon as I hit the gas is there a problem?
What did you find out?
Thanks for the plug, people been calling ordering sheaves saying if yours is the one everyone elses is judged by must be good.
Hunterworks1 ....did you not watch the vid?? this is not a comparison cause there is none... im calling you out on your junk but you dont have a clue just like with sheaves...
Will someone tell me what kinda of performance I will get out of ordering one of these sheaves ?
lmao@hw lame reply, he wishes.....
I would like to get one but I like my 30 gram weights in Kodiak ,would only go 3 or 4 grams lighter .
2016 grizzly 700 in Canada. How much for a milled sheave?
90 shipping to Canada
Are you guys still working on this stuff?
about 2 years ago, I got involved in sxs and like everyone else, wanted to learn about free/cheap mods. I found some Hworks videos including the one shown and some "technical papers". First, let me say that I know this is a grassroots sport and many products evolved thanks to good ole tinkering and trial & error... But, as a mechanical engineer, listening to the Hworks talk in terms of absolutes yet saying "I guess" about everything made me cringe. Good thing he don't build bridges. I find your products and descriptions much more intriguing, valid, and descriptive. This is not to say yours is as technical as say Yamaha's own engineering team, but everything described is more recognized and generally accepted. good luck to you sir, and one day I will be a customer.
thanks big R
not as good looking as you think like your sheave!! at least you can learn something watching my vids
It's good information, but I find this feud quite unprofessional actually since you used to call Hunterworks Inc for advise when you first started machining sheaves.
ZipTy ..there is no feud.. showing facts..what it was is i bought his junk and had to fix it myself..i wouldnt have had to make my own if he knew wtf he was talking about...so take your unprofessional shit and stick it...i guess i should set back and let him call me out and feed people the wrong info to sell his junk...not gonna do it
@@WVHotRodRhino wow just found this video better late than never i guess .......if the parts are better and the customer service is as good as ive read then i dont see it as unprofessional. looks more to me like your proud of your work and the r&d you put in to make it the best you can. id be mad as hell if someone was selling shit that didnt work as well as mine and telling everyone they were the best. anyway i will be calling after the last ride of this year to order a full kit for my 2012 grizzly 700 im not very happy with the 1.5 shim and epi gold spring and 29.5 outlaw 2s. needs more low end seems to me its really hard on the wet clutch now but its ok after about 6 to 8 mph
@@ethanray9123 it takes a lot to figure this stuff out and then the other companies copy you and try to claim they did it so I put these videos out there just like you said to show the hard work that we put into this to be the best... thanks for noticing.. just let me know when you're ready and we'll get you fixed up with a quality product
I need sheaves for a hand powered dumbwaiter... This does not looknlike what I need.
Why does he remind me of Dimond Dave?
how could you be any more unprofessional?? I would think if your products where that much better they would speak for themselves and you wouldn't have to make a ridiculous call out video.
they do that too..alba,benchmark,racers edge and 120 more dealers carry our sheaves for a reason...its info for people who dont know...some people that was getting ready to spend money else where thanks me for the vid...thanks for your opinion..
junk
Lol