Haha I actually tried that first and it didn't work for me. Couldn't blow hard enough to get air all the way through. You must have a nice pair of lungs on you haha. 😀
Well your diagnosis of the problem definitely worked. I just took a tube and put it to my mouth and the other end held it to the hole and sure enough after a few minutes of blowing with the button pressed it fixed the problem thank you very much
Great tip! I tried that on mine but, I couldn't get it to go through. I don't know if my lungs are not as strong as yours or it was just more blocked. lol
Went and bought a Rowenta. It gets very hot while your using it by the handle. Couldn't use it for too long. Hated it. Came back looked up UA-cam and there you were. I did what you showed and it worked. I've had my Steamer since 2016. Thank you so much. But Now that I've seen the Conair Turbo I might upgrade. Again, Thxs.
Thanks for the help! Side note, I didn’t have any pressurized air, so instead I took my water flosser, held the steamer upside down and sprayed water into, which worked too!
Awesome... just bought one at the flea market for $1 - not working when we got home. Tried your fix and 30 seconds later BOOM working great. Thank you!
Thank you so much! I used my Conair steamer once. Today it wouldn’t work and was outside the return period. I was grumbling and not about to remove screws like another UA-cam suggests. It took me a couple tries with the can of air, but this solved it. Appreciate your putting this up to help us.
This video just made my day! I just knew my steamer was ‘down for the count’! I only had a bicycle pump, but I used that and pushed the ‘reset’ button! 🤷🏽♀️
Thank you. After reading all of the negative comments about the Conair GS237x my fiance encouraged me to read this Easy Fix video and I must admit I am glad I did. The machine works great on lighter fabrics. The steam works great on both settings: Hi Heat and Lo Heat. Thank you for the Easy Fix video. Thumbs up!
Saved me from throwing it out and buying a new one!!! I actually used a 10 cc syringe I had laying around and it worked. Thanks so much for sharing, that was ridiculously easy.
This is a youtube tutorial like we had in the good old days of the Internet - short, and solves the problem! Thanks, saved me from having to buy a whole new steamer for such a silly thing.
I used your idea but with an air compressor at 50PSI... worked like a charm! i was skeptical since the water/vinegar trick did nothing. Thanks for your idea!
Great video thanks, I had a similar problem I'd like to let your viewers know about. I had no flow for a different reason. The water intake hose in the reservoir was curled up and jammed in the top of the reservoir, so the intake opening of the intake hose was not underwater, which is a devious little problem because it has the same symptoms as the issue you described. I moved the hose to its proper place with a chopstick. I hope this helps someone, thanks for your video.
I was desperate and did not have can of air so I gently shook the unit while ON and tank full of water and it started to work! BTW this is brand new out of the box! Thank you!
Fixed in one minute literally. I only had a “manual” air duster for my camera, works the same just press in the hole and blow out the air. I almost scrapped the steamer glad I checked here on UA-cam first! Thanks!
Thank you SO MUCH for this fix! I bought this steamer about eight months ago and it was DOA. The thing would drastically heat up but not steam. By the time I wanted to return it, it was already past the return period, so it’s just been sitting here while I dread the thought of spending even more money on a replacement. Thank you for this easy fix and for helping me save some dough while I’m in austerity mode ❤
Thank you so much for sharing. I had one for a few years and it stopped working so I purchased a used one on ebay and it didnt work either. So I Googled common issues with these steamers and you video popped up. Now BOTH are Working 😂
Another good one I used (since I didn’t have spray air) was my water flosser 😂 it has good pressure enough to remove the clog in the steamer and it worked great! Thank you for the inspiration!
Yes!!!!! It worked, thank you so much. I also used a bicycle pump. Then taped down the trigger for a few minutes (arm was getting tired) and it came back to life!
Thanks a lot man, I bought a Tristar one here in Spain 🇪🇦, i just flipped it with the button pressed for a few seconds, a few bubbles came out and done, working, I was about to drive 30 minutes again to return it, thankfully i saw your video 👌🏻😌
Thanks for your video. I was ready to toss my steamer in the trash and watched your video. We don't have any canned air, but my husband used his air compressor and a little shot in the valve cleared it right now. So glad to not throw this in the trash and to have it work. Thanks again!
OMG!! This just saved me so much headache! I thought I was gunna have to get another steamer as a present for Fathers Day. I didn’t even have a canned air around. I figured I’d try using my kids’ medicine dropper and that did the trick! Thank you so much!!
I so wish I saw this like 2 years ago! I had bought a Conair steamer and it "broke" on me, so I bought another one, and it "broke" again. Then I found this, used the compressed air, and voila, it works! Wish I knew before since my old steamer probably was the same issue!
thank you so much for this information..i only ever use distilled water in all my steamers, irons etc for this not to steam threw me for a loop..i only had it for a short wihie. i've had my iron for 30 odd years and never an issue using distilled water. i think it just needed a burp..it saved me a lot of money from buying another.
Thank you so much! I was about to toss my steamer because I thought it was done for and once I did this, it is functioning like brand new! I've already steamed two shirts and a blazer!
Bro!!!!! You literally saved my day with this video!!!!! I didn't have any air so I just blew into the line really hard and it worked. Thank you!!!!!!!!
Damnit man, UA-cam saves the day again, I had started back using my regular iron, I decided to check UA-cam and your comment got mine back working in under 30 seconds 👍🏿
yay. Thanks. Before I saw this I watched a video involving taking it apart. Blew air through a straw and bingo. Can't thank you enough - have over 100 feet of garland to steam!!!!!
Worked for my Conair Turbo Extreme Steam advanced which is very similar to this one. This tip had mine working in less than 10 seconds, I did use the little straw attachment on the air can though as it fits in the water suction hole better. Thanks!
Thank you so much! I just tried this on my hand held steamer. So happy you did this simple tutorial, it worked straight away, you’ve saved me another £70 to replace it. Just a tip, I had to use the additional straw that comes with the duster spray, because of the shape of the steamer, which fitted into the water hole just fine.
Steve No Way. I'm not sure why it's still happening, The only reason I can think is because the mineral deposits are inside the device. Maybe try to flush out the device. I have always used Distilled Water from the steamer coming out of the box until now. It's also what I use in my iron and no issues with build up in my new iron. I used to have mineral deposits in my old iron and when I realized it was from my tap water (I live in South Florida) and our water is city water which has alot of minerals in it. No more issues ever since I've been buying Gallon Distilled Water at my local Supermarket called Publix. At home I even use a Berky Water Filter to filter out the excess minerals but thats only for food cooking and drinking. Hope that helps you.
Wow it worked! I just unpacked brand new Sencor steamer that didn’t work. I blew the air also into the tube to the water tank system and it helped. Thanks 🙏
Tried vinegar and water. Tried CLR. Still wouldn’t produce steam. Canned air trick worked great to get through the initial clog. Ran 2 tanks with CLR/water mix through steamer. Now we are back in business.
Oh thank you so. much! I am glad I found you. I almost added to the landfill a very rarely used 1 yr old good steamer! There is a steam reset button behind the tank on mine, I just pressed that and put the tank back - I have a Conair handheld travel turbo steamer, a very powerful steamer. It's working again.
Thank you! I just moved and thought the steamer somehow got banged up in the move. I have like a million bottles of compressed air laying around from working on my PC, and this fix was so easy! I used the straw to poke into the hole since my current cans are cheap and don't line up flush. The little puff of whatever came out of the hole surprised me lol. You just saved me money =)
oh my gosh you are seriously a life saver!!! So easy! Thank you, thank you, thank you!!!🥰 I have been trying to get this clog out of my steamer for hours, never did i think about spray air!
This worked like a charm! Had tried vinegar in the water to clear the calcium / lime buildup, but that didn't work, but this trick had me back in business in a couple of seconds! Thanks!
This was brilliant! What a genius trick, thanks OP for the share!! My neighbour gave me a 90% new steamer saying it didn't have enough heat power, meanwhile the box says otherwise. I found your video, used a recently empty room freshener aerosol can with that kind of tip and it worked. There it is steaming hot and no longer making a drilling sound. 😅
This works! 100%. These steamers aren't terribly expensive, but they're not cheap either. Mine is the Conair Handheld Garment Steamer for Clothes, Turbo ExtremeSteam (double slot) 1875w. I bought it back in 2022 and used it twice (distilled water only). Since then, it's been stored away so well it still looks brand new. However, when I recently found a new use for it, Oops no steam -although you could feel it trying to push the steam out (full reservoir). As it turns out, it probably wasn't good that I neglected to completely empty-out said reservoir before storing it. Anyway, I just happened to have a few cans of compressed air and so your tip worked like a champ. Great video..😎🤘🤘
For those who don't have canned air: before I headed out to Walmart my husband said he would just blow the tube with his mouth... And it magically worked as well!!!
I just unscrewed a pen, (removed the pen part of it), jammed it in the hole and blew out the back end while pressing the button and it worked!!
Haha I actually tried that first and it didn't work for me. Couldn't blow hard enough to get air all the way through. You must have a nice pair of lungs on you haha. 😀
@@unmatchedvalue a situational solution then! Thanks for showing the concept of what to fix.
Well your diagnosis of the problem definitely worked. I just took a tube and put it to my mouth and the other end held it to the hole and sure enough after a few minutes of blowing with the button pressed it fixed the problem thank you very much
Pen trick worked for me! Didn't have canned air laying around. Thanks!
Thanks it works
Dude this did the trick. Almost threw it away due to not working anymore. Thank you so much! Awesome content…
You're welcome!
@@unmatchedvalue 5 years later and this did the trick for me too. It was headed to the garbage - now has a new life! Thanks!
I used a plastic straw I had laying around and blew in it myself and it also worked!
Thanks!
Great tip! I tried that on mine but, I couldn't get it to go through. I don't know if my lungs are not as strong as yours or it was just more blocked. lol
They say you can find anything on UA-cam and this video proves them right. Worked like a charm.
Yesssss! This steamer sat around for over a year & I almost threw it out.
Thanks ah bunch! You out here helping folks. Love it.
Glad it helped, thank you for taking the time to comment.
Oh my gosh. Same!
I bought the newer model from target for $60, and it had this problem. I won't have to return it now, this trick worked! Thank you !
Glad it helped, thank you for taking the time to comment.
Tried this, had a working steamer 30 seconds later. Thanks man!
Glad it worked for you. Thank you for taking the time to comment!
Didn't have a can of air so I used a straw and blew. Worked like a charm. Thanks.
Using straw worked for me as well. Thanks for sharing how you did it.
Glad it helped
Went and bought a Rowenta. It gets very hot while your using it by the handle. Couldn't use it for too long. Hated it. Came back looked up UA-cam and there you were. I did what you showed and it worked. I've had my Steamer since 2016.
Thank you so much. But Now that I've seen the Conair Turbo I might upgrade. Again, Thxs.
Glad this helped you! thanks for taking the time to comment.
Thanks for the help! Side note, I didn’t have any pressurized air, so instead I took my water flosser, held the steamer upside down and sprayed water into, which worked too!
Thanks so much for this tip!
Awesome... just bought one at the flea market for $1 - not working when we got home. Tried your fix and 30 seconds later BOOM working great. Thank you!
Glad it helped!!
Thank you so much! I used my Conair steamer once. Today it wouldn’t work and was outside the return period. I was grumbling and not about to remove screws like another UA-cam suggests. It took me a couple tries with the can of air, but this solved it. Appreciate your putting this up to help us.
This video just made my day! I just knew my steamer was ‘down for the count’! I only had a bicycle pump, but I used that and pushed the ‘reset’ button! 🤷🏽♀️
Glad it helped, thank you for taking the time to comment.
Thank you. After reading all of the negative comments about the Conair GS237x my fiance encouraged me to read this Easy Fix video and I must admit I am glad I did. The machine works great on lighter fabrics. The steam works great on both settings: Hi Heat and Lo Heat. Thank you for the Easy Fix video. Thumbs up!
Glad it helped
Saved me from throwing it out and buying a new one!!! I actually used a 10 cc syringe I had laying around and it worked. Thanks so much for sharing, that was ridiculously easy.
Glad it helped, thank you for taking the time to comment.
Unbelievable! I used a 30cc syringe after reading the comments and it worked just great! Thank you for the posting.
This comment and video save me so much money My steamer worked in seconds !
This is a youtube tutorial like we had in the good old days of the Internet - short, and solves the problem! Thanks, saved me from having to buy a whole new steamer for such a silly thing.
Glad it helped!
Blew mine out with a small straw. Started working just fine. TY
Glad it helped.
I used your idea but with an air compressor at 50PSI... worked like a charm! i was skeptical since the water/vinegar trick did nothing. Thanks for your idea!
Awesome glad it worked.
This worked! I was ready to return it to Costco, and now I don't have to! Thank you!
I've had it about a year, but have only used it maybe 3 times
Glad it helped!
Don't get no more easier than this; she had this sitting in the closet for a good while. Thanks for the heads up!!
Glad I could help!
Great video thanks, I had a similar problem I'd like to let your viewers know about. I had no flow for a different reason. The water intake hose in the reservoir was curled up and jammed in the top of the reservoir, so the intake opening of the intake hose was not underwater, which is a devious little problem because it has the same symptoms as the issue you described. I moved the hose to its proper place with a chopstick. I hope this helps someone, thanks for your video.
Also, if you don't have the this can of spray, use a straw (coffee or the straws for alcohol) and blow into it. Iw works!!
I was desperate and did not have can of air so I gently shook the unit while ON and tank full of water and it started to work! BTW this is brand new out of the box! Thank you!
Very helpful! Couldn’t get mine to work for weeks and you saved me from buying a new one ! Thank you
Glad it helped, Glad i was able to save you a few bucks. Thank you for taking the time to comment.
Fixed in one minute literally. I only had a “manual” air duster for my camera, works the same just press in the hole and blow out the air.
I almost scrapped the steamer glad I checked here on UA-cam first!
Thanks!
Glad it helped!
Thank you SO MUCH for this fix! I bought this steamer about eight months ago and it was DOA. The thing would drastically heat up but not steam. By the time I wanted to return it, it was already past the return period, so it’s just been sitting here while I dread the thought of spending even more money on a replacement. Thank you for this easy fix and for helping me save some dough while I’m in austerity mode ❤
Thank you so much for sharing. I had one for a few years and it stopped working so I purchased a used one on ebay and it didnt work either. So I Googled common issues with these steamers and you video popped up. Now BOTH are Working 😂
You are welcome! Glad this helped!
Another good one I used (since I didn’t have spray air) was my water flosser 😂 it has good pressure enough to remove the clog in the steamer and it worked great! Thank you for the inspiration!
oh that's actually smart I think your the first one to do that!
Yes!!!!! It worked, thank you so much. I also used a bicycle pump. Then taped down the trigger for a few minutes (arm was getting tired) and it came back to life!
Glad it helped!
Thanks a lot man, I bought a Tristar one here in Spain 🇪🇦, i just flipped it with the button pressed for a few seconds, a few bubbles came out and done, working, I was about to drive 30 minutes again to return it, thankfully i saw your video 👌🏻😌
Glad I could help
Thanks for your video. I was ready to toss my steamer in the trash and watched your video. We don't have any canned air, but my husband used his air compressor and a little shot in the valve cleared it right now. So glad to not throw this in the trash and to have it work. Thanks again!
Glad I was able to save you some money!
Thank You! Our conair steamer was not working, my wife had to get the wriggles out of her new outfit. Your instructions was spot on! Thanks again.
Glad it helped!
OMG!! This just saved me so much headache! I thought I was gunna have to get another steamer as a present for Fathers Day. I didn’t even have a canned air around. I figured I’d try using my kids’ medicine dropper and that did the trick! Thank you so much!!
Glad it helped!
I so wish I saw this like 2 years ago! I had bought a Conair steamer and it "broke" on me, so I bought another one, and it "broke" again. Then I found this, used the compressed air, and voila, it works! Wish I knew before since my old steamer probably was the same issue!
I'm glad the video helped, and hey at least you didn't have to buy a new one this time. 😀
thank you so much for this information..i only ever use distilled water in all my steamers, irons etc for this not to steam threw me for a loop..i only had it for a short wihie. i've had my iron for 30 odd years and never an issue using distilled water. i think it just needed a burp..it saved me a lot of money from buying another.
You are so welcome, Glad it was helpful!
Thank you so much! I was about to toss my steamer because I thought it was done for and once I did this, it is functioning like brand new! I've already steamed two shirts and a blazer!
Glad I could help!
If you do not have the can of spray, uses a coffee straw that is small enough to fit and blow into it a few times. It works!!
Bro!!!!! You literally saved my day with this video!!!!! I didn't have any air so I just blew into the line really hard and it worked. Thank you!!!!!!!!
Damnit man, UA-cam saves the day again, I had started back using my regular iron, I decided to check UA-cam and your comment got mine back working in under 30 seconds 👍🏿
I used a small straw instead of the caned air. It worked, thanks for the video.
You must have a set of lungs on you because that's the first thing i tried and it didn't work for me, although maybe mine was more blocked up?
yay. Thanks. Before I saw this I watched a video involving taking it apart. Blew air through a straw and bingo. Can't thank you enough - have over 100 feet of garland to steam!!!!!
Worked for my Conair Turbo Extreme Steam advanced which is very similar to this one. This tip had mine working in less than 10 seconds, I did use the little straw attachment on the air can though as it fits in the water suction hole better. Thanks!
Glad to hear it worked and that's awesome I bet the straw made it much easier to use.
Thank you so much! I just tried this on my hand held steamer. So happy you did this simple tutorial, it worked straight away, you’ve saved me another £70 to replace it. Just a tip, I had to use the additional straw that comes with the duster spray, because of the shape of the steamer, which fitted into the water hole just fine.
Dude.. totally worked. I was about to throw it away. Thank you. Much better than the suggestion to take it apart... brilliant.
You're welcome!
Thanks for the tip. What helped mostly was uncloghing the steam jets on top with air
Very welcome!
Mineral Build-Up is what caused the issue. Use Distilled Water to avoid the mineral build up in the internal parts of the system.
That's useful info thanks for posting.
You are Very Welcome! I had the issue when I first started ironing and than I read the manuel and realized I was using the wrong type of water.
I used distilled water but it still happens
Steve No Way. I'm not sure why it's still happening, The only reason I can think is because the mineral deposits are inside the device. Maybe try to flush out the device. I have always used Distilled Water from the steamer coming out of the box until now. It's also what I use in my iron and no issues with build up in my new iron.
I used to have mineral deposits in my old iron and when I realized it was from my tap water (I live in South Florida) and our water is city water which has alot of minerals in it. No more issues ever since I've been buying Gallon Distilled Water at my local Supermarket called Publix.
At home I even use a Berky Water Filter to filter out the excess minerals but thats only for food cooking and drinking.
Hope that helps you.
Thanks so much I just learned this a few days ago.
Wow it worked! I just unpacked brand new Sencor steamer that didn’t work. I blew the air also into the tube to the water tank system and it helped. Thanks 🙏
Glad it helped
I appreciate this video. Saved me from pulling my hair out trying to figure out how to get steam to come out.
Glad it helped.
Thank you so much, it worked!!! I liked and subscribed!!! When I moved, it sat in box for over a year. I thought it was broken...
Glad it worked for you, Thank you so much for subscribing really helps me out.
@@unmatchedvalue when I get help from UA-cam. I am so grateful, I will like and subscribed. Keep up the good work! Thank you again!
I would just like to say this worked for me as I had a new conair steamer that hasn't been used for a while.
glad it helped
Thanks!! This worked perfectly!!! I have a different model steamer, which suddenly stopped working, but this trick brought it back to life!!
Glad it helped, thank you for taking the time to comment.
Tried vinegar and water. Tried CLR. Still wouldn’t produce steam. Canned air trick worked great to get through the initial clog. Ran 2 tanks with CLR/water mix through steamer. Now we are back in business.
Glad it worked for you. Thank you for taking the time to comment.
hey, great comment, what is CLR?
Oh thank you so. much! I am glad I found you. I almost added to the landfill a very rarely used 1 yr old good steamer! There is a steam reset button behind the tank on mine, I just pressed that and put the tank back - I have a Conair handheld travel turbo steamer, a very powerful steamer. It's working again.
oh that's a nice feature to have.
Didn't have compressed air so I just used a syringe.. Success!
Couldn't do it without the tip!
Thank you!
Oh nice, glad it worked.
OMG I just did it with a straw. Was about to give up after using all my lung capacity then the steam just started coming out! TYSM!
Glad it worked, I tried with a straw a little but I quickly switched over to the canned air.
Thank you! I just moved and thought the steamer somehow got banged up in the move. I have like a million bottles of compressed air laying around from working on my PC, and this fix was so easy! I used the straw to poke into the hole since my current cans are cheap and don't line up flush. The little puff of whatever came out of the hole surprised me lol. You just saved me money =)
Glad i could help :)
Thank you so much for sharing this! I tried the vinegar distilled water 4 times and it barely made a difference. This cleared it out like a charm.
Glad it helped!
oh my gosh you are seriously a life saver!!! So easy! Thank you, thank you, thank you!!!🥰 I have been trying to get this clog out of my steamer for hours, never did i think about spray air!
You are so welcome!
Great DIY Trick. I used an air pump and it did the trick as well. Thanks for the helpful video
Glad it helped
This totally worked! I used a compressor with a bike tire needle attachment to push air through.
Excellent! Glad it helped
This worked like a charm! Had tried vinegar in the water to clear the calcium / lime buildup, but that didn't work, but this trick had me back in business in a couple of seconds! Thanks!
Glad it helped, thank you for taking the time to comment.
Thanks for the video! I didn't have compressed air so I used a skinny straw and lung power and it worked!
Glad it worked.
On a vacation and hard to fix air so tried to blow it out instead and it worked!! Thanks!!
Glad I could help!
This was brilliant! What a genius trick, thanks OP for the share!! My neighbour gave me a 90% new steamer saying it didn't have enough heat power, meanwhile the box says otherwise. I found your video, used a recently empty room freshener aerosol can with that kind of tip and it worked. There it is steaming hot and no longer making a drilling sound. 😅
Fantastic!
This works! 100%.
These steamers aren't terribly expensive, but they're not cheap either.
Mine is the Conair Handheld Garment Steamer for Clothes, Turbo ExtremeSteam (double slot) 1875w. I bought it back in 2022 and used it twice (distilled water only). Since then, it's been stored away so well it still looks brand new. However, when I recently found a new use for it, Oops no steam -although you could feel it trying to push the steam out (full reservoir).
As it turns out, it probably wasn't good that I neglected to completely empty-out said reservoir before storing it.
Anyway, I just happened to have a few cans of compressed air and so your tip worked like a champ. Great video..😎🤘🤘
glad it helped.
I was going to throw my steamer away and came across this video. Thank you, this worked right away.
Glad I was able to save you some money. Thank you for taking the time to comment.
I used a dust removal tool (the ones for cleaning camera lens), and it worked great, thx so much for this video.
Great tip! and you're welcome
Many thanks. It's worked a treat. You've just saved my steamer from going in the bin.
Thanks. I was about to do this when I noticed the RESET STEAM button and I hit that. Sometimes the obvious works!
Thank you!! It was the first time I’d used it and it didn’t work, so buildup was not the culprit. Weird. But this worked! 🎉
Well whatever it did, glad it helped.
Worked! I had no compress air so I blew in a straw a couple of time and worked.
glad it worked.
Like all the other comments, was ready to toss it out but this worked like a charm. Thanks!
You're welcome, Glad it helped!
thank you for the video! my partner and I have this steamer and we thought it was broken, but after trying the compressed air it worked again!
This has been last minute, prior to travel life-saver! Thanks you!
Glad it helped, thank you for taking the time to comment.
Lol i didn’t have a bottle and just blew into it and it worked. Thank you
Glad I could help
Thanks! I took a straw and blew in it and it worked like a charm! You da man!
Glad it helped!
Thanks I just tried this but using a nebulizer machine 😅 ..it unclogged the garment steamer in seconds n it was good as new 👌
Great 👍 glad it worked.
Thanks...worked perfectly. Watched a video where some guy took the whole top apart.
Glad it helped
For those who don't have canned air:
before I headed out to Walmart my husband said he would just blow the tube with his mouth... And it magically worked as well!!!
It really WORKED!!!!!! I was going to return the steamer. And thanks to your video I fixed it!!!!
It works now! Thank you so much. We will be returning the replacement steamer we just purchased.
I was about to throw my steamer away till I found this video- and it was fixed within seconds- thank you so much for this great tip!!
Glad it helped!
Glad I didn't throw it out, because this worked! Thank you so much!!!
Glad it helped!
Awesome! Thank you! I was about to throw it out! Working again!
Glad I could help!
THANK YOU VERYYY MUCH.. this helped me alot.. i used a straw and it WORKED MIRACLES...
THANK YOU VERY VERY VERY MUCH ❤❤
Thank you! I borrowed my mom’s Rowenta and had to use a piece of tape to cover one of the inlets. Otherwise she would have thought I broke it!
Glad I could help!
*THANK YOU!!!!!! This totally worked for us - I am glad I dound your video. Now I can steam my couch and seat in peace.* 😆
Glad to help!
Thank you it really worked!!!! Bro you saved me from my father 😅
Happy to help lol
So helpful, I haven’t been using because I thought it was defective and I waited to long to return.
Glad I was able to help
Thank you so much!! I got really lucky and had just about enough canned air to fix my steamer!!
Glad I could help!
Thanks for this great easy fix! I used this technique on my rowenta xcel steam and it worked like a charm!
Glad it helped.
thank you so much for your trick, my B&D handheld steamer HGS200C had same issue and using forced air fixed it. 🎉
Oh my gosh!! Thank you. You saved me a trip to the store for a return.
Thank you so much. I thought I’d have to toss the steamer but now it works!! You rock 🤘🏼🤘🏼
Glad I could help!
Used a manual balloon pump and it workeddddd! Thank you!!!
You're welcome!
Not all heroes wear capes ... thank you
Haha thanks glad it helped.
Yep! Mine WORK now too! Thank UUUUUUUUUUU!!!!!
You're welcome!
It worked! I used a straw instead and blew and worked fine.
Dude,...thank you, thank you, thank you. Worked like a charm.
Thank you !It worked perfectly!I thought I would have to buy new one!
Glad I could help
Thanks! It’s working now!!! But my canned air is so expensive from Walmart
Glad it helped, thank you for taking the time to comment.
Worked like a charm with the bicycle pump!
Oh that's a good idea, I didn't even think of that.