Love, love ,love IT!! NOT a structural engineer, did however put up countless number of buildings. Did most of footings ,slabs ,nd piers. Of course after the iron workers were done. Appreciate your enthusiastic approach to things . Going through your list of loged video. Especially loved the container pool comparisons. Going to put a pool in So far fiberglass is looking like the winner. Keep up the great information you put out. Your such a pleasure to watch nd listen too. Looking forward to more of your channel.
Hi, I'm trying something similar to this to practice with Dynamo a bit and noticed that your script doesn't work currently in Revit 2021 within my project or yours. Do you think it has something to with me or is it broken? It's having problems with taking the list and graving its faces. (Element.Geometry > Face.Vertices = Null). If you have any insight I'd be glad to hear about it since I don't know how to replace that bit of code right now. Thank you
I scrolled through a bit on the comments and the answer was to replace the Faces.Vertices to Topography.Vertices. I'll keep updating on changes needed if I encounter them
@belinda carr I too face the same issue (Element.Geometry > Face.Vertices = Null) even when run in your file and script is it about the REVIT Version? I replace this "Face.Vertices" to "Topography.Vertices" is it ok.
hi Belinda, how to create a mass surface that follows a 3D geometry line from AutoCAD using dynamo? so the 3D geometry is already available (IFC or 3D line CAD) and the aim is a create structural framing from that complex surfaces. thanks
Im not able to get the beams in my live project using this script I tried with different script little modified, but final result im only able to see a blue imaginary lines floating above the surface in 3d view Anyone know the idea or solution to the issue?
They are a very promising solution in hurricane prone regions and tornado alley. They are a good alternative for diy home builders too. The main issue I see is tricky and expensive waterproofing. It's a fairly new product, so everything is proprietary and there isn't enough competition right now.
@@BelindaCarr look this over water proofing is easy, and the cost for it in the usa is low. Its just the cost of of concrete and the steel bars you do not even have to put in them if you use STEEL FIBERS IN CONCRETE ua-cam.com/video/_hBfFHPvb9I/v-deo.html
TO ANYONE WHO HAS THE SAME PROBLEM AS MINE AND SEARCHED FOR HOURS HOW TO DRAW BEAMS ON COLUMNS WHEN THEY HAVE DIFFERENT HEIGHTS, DRAW BEAMS WHILE LEAVING THE 3D SNAPPING.
Love, love ,love IT!!
NOT a structural engineer, did however put up countless number of buildings. Did most of footings ,slabs ,nd piers.
Of course after the iron workers were done.
Appreciate your enthusiastic approach to things . Going through your list of loged video.
Especially loved the container pool comparisons.
Going to put a pool in
So far fiberglass is looking like the winner.
Keep up the great information you put out.
Your such a pleasure to watch nd listen too.
Looking forward to more of your channel.
my face.vertices gives error and showsno element. its while I can see the list under element.geometry.
Pls use Topology.Vertices instead of FaceVertices. It will work.
@@seidegk6374 thank you so much for the solution 🙏
when I try to connect element geometry to face vertices error message appears saying in expects geometry solid any help appreciated?
face.vertices gives error
Pls use Topology.Vertices instead of FaceVertices. It will work.
hello is any different method to explode dynamo model to Revit because of my spring.familyinstance.by geometry is not working. if have please help me
wow you make this seem so easy
Thank you very much, Belinda.
Thanks for great video, Belinda, really appreciate your time and sharing
Belinda is becoming a really strong UA-cam competitor for BalkanArchitect!! 💪🏻
Can you make a presentation for importing survey points from excel and make small pads based on the levels
Haha! His work is admirable.
Will do. What do you mean by "small pads"? Not just a single site map? Do you want the site map to be sliced?
Thank you Belinda. Take care.
Hi, I'm trying something similar to this to practice with Dynamo a bit and noticed that your script doesn't work currently in Revit 2021 within my project or yours. Do you think it has something to with me or is it broken? It's having problems with taking the list and graving its faces. (Element.Geometry > Face.Vertices = Null). If you have any insight I'd be glad to hear about it since I don't know how to replace that bit of code right now. Thank you
I scrolled through a bit on the comments and the answer was to replace the Faces.Vertices to Topography.Vertices. I'll keep updating on changes needed if I encounter them
@@sechmascm thank you but i could not find topoograghy but topology.vertices work well too
@@silentworkhorse4002 and wich code can I use instead of Face.Vertices , thus I cannot use Face.Vertices with Topology.Faces
Welcome Back
@belinda carr I too face the same issue (Element.Geometry > Face.Vertices = Null) even when run in your file and script is it about the REVIT Version? I replace this "Face.Vertices" to "Topography.Vertices" is it ok.
Thanks for sharing the scripts, really helpful!!
hi Belinda, how to create a mass surface that follows a 3D geometry line from AutoCAD using dynamo? so the 3D geometry is already available (IFC or 3D line CAD) and the aim is a create structural framing from that complex surfaces. thanks
Im not able to get the beams in my live project using this script
I tried with different script little modified, but final result im only able to see a blue imaginary lines floating above the surface in 3d view
Anyone know the idea or solution to the issue?
1qun how to creat tunnel in creat in curved.
How do you feel about icf homes or icf blocks
They are a very promising solution in hurricane prone regions and tornado alley. They are a good alternative for diy home builders too. The main issue I see is tricky and expensive waterproofing. It's a fairly new product, so everything is proprietary and there isn't enough competition right now.
@@BelindaCarr look this over water proofing is easy, and the cost for it in the usa is low. Its just the cost of of
concrete and the steel bars you do not even have to put in them if you use STEEL FIBERS IN CONCRETE
ua-cam.com/video/_hBfFHPvb9I/v-deo.html
@@BelindaCarr
I was talking about using Helix Steel is the manufacturer of Twisted Steel Micro Rebar in your icf wall system to cut down on cost
Thank you very much, Belinda. It was really useful :)
Very very nice tutorial
Great content as always. Would have been helpful if you gave the Revit file with the scripts, but thank you so much for the work you put in.
Thanks, Kashif! I'll add it to the link right now.
Thank you very much, you're awesome as always 👍
@@BelindaCarr could you explain the different types of insulating and sealing
Basically an idiots guide
Thank you very much! Great content!
Thanks, very helpfull!
Clever Stuff
TO ANYONE WHO HAS THE SAME PROBLEM AS MINE AND SEARCHED FOR HOURS HOW TO DRAW BEAMS ON COLUMNS WHEN THEY HAVE DIFFERENT HEIGHTS, DRAW BEAMS WHILE LEAVING THE 3D SNAPPING.
oh my god thank you so much
You are knowledgeable. I would like you to explain something to me.
Hi nice video.
but y tho?