SHYSKY 12VDC 80W Micro Water Pump DC60G-12100S-1 Unboxing Video

This is a video that shows the unboxing of the SHYSKY 12VDC 80W Micro Brushless Water Pump DC60G-12100S-1 model. Max. static lift of this pump is about 10 meters at 12VDC, while Max. horizontal flow rate of this pump is about 3200 Liters Per Hour. Both inlet and outlet are 3/4'' threaded, with external diameter of about 25mm. --For sample demand, www.amazon.com... . For larger quantity sourcing, or for customization demand, contact us directly through email, [e-mail] . We will offer necessary support, incl. technical support, when in need.
About this item
SHYSKY DC60G-12100S-1 Water pump, Inlet & Outlet: Both 3/4'' threaded, with external diameter of appr. 25mm; Max static lift 10 m (~32 ft, in pressure, 0.10MPa or 14.5PSI); Max horizontal flow rate 3200 LPH (~ 53L/Min, also, ~845GPH). Typical feature is with good lift and flow rate, suitable for some micro/ medium circulation/ pressure/ cooling sys.
Brushless DC motor, also known as EC motor; Magnetic Driven (NO DIRECT AC 100-240V POWER CONNECTION, PROHIBITED); Small size but strong; Low consumption & High Efficiency; Long time continuous working with low noise;Safety - no spark, Explosion - proof; Low noise about 40dB.
With typical features of low-voltage safety, high power-efficiency, low noise at normal work and supporting long-time continuous reliable running, this pump is widely applied for fountain landscape, medical equipment water cooling circulation, air compressor cooling circulation, PC server water cooling, yacht/ vehicle water cooling, and vavrious other industrial, medical and household water processing systems. Note that pump cannot be self-priming, and it is important to make sure that there exists no dry run (especially for long time) and avoid impurities in the pumping systems.
Variety Power: 12V DC electric source, Battery or Solar Panel, etc; Soft Start with Low in-rush current, Especially suitable for Solar SYS who can not provide over-high startup impulse current; Constant power level when powering vol. is over 12VDC yet under 14VDC, quite useful feature in some cases.
NEW DRY-RUN PROTECTION feature is integrated in default: Pump works at rated voltage, when no or in-sufficient water in-flow (or significant air bubble contained), it is DRY RUN scenario and protection will be triggered; Pump will access stop-run-stop-run---cycle, greatly reducing rotation. When flow comes sufficiently again, pump will re-access normal run. This greatly reduces physical damage possibly caused by friction between parts, and generated heat too, protecting pump. Yet, protection does not completely eliminate the impact if long time dry run, since pump doesn't stop completely in this context.
DC60G-12100S-1 Micro Brushless DC Water Pump
Dimension and weight 152 x88 x110 mm (~6 x 3.5 x 4.3 inch); appr. 1.5Kg (~3.3lbs)
External diameter of outlet 3/4” thread (M25)
External diameter of inlet 3/4” thread (M25)
Driving mechanism Brush-less, magnetic isolated design
Material of pump shell ABS,PES/SPS/PPS/PA66+30%GF (Optional when customization at MOQ)
Condition of us Support continuously work, submersible or land use (note that pump cannot be not self-priming)
Suitable medium Water, oil, etc (corrosive or special fluids shall be tested in advance.) (Pre-test needed for special liquid)
Max working temperature 100 ~ 120℃(for S/A sub-series)
Power consumption 80W @ 12VDC
Rated voltage 12Vdc
Working voltage range 10Vdc ~ 18Vdc
Max load current 6.6A @ 12VDC
Max horizontal flow rate 3200L/H @ 12VDC (~845 G/H)
Max static lift 10M @ 12VDC (for S/A sub-series) (~ 32 ft)
Noise class less than 40dB, at 1m distance
Waterproof class IP68