I have a performance black. Had it 9 weeks now. Got a cobra cat back and k and n panel filter, as i couldnt find a cone filter induction kit for it. Got my bits from pug 1 off. Sounds so good now. Standard was just far to quiet for me. Lol. Nice to see someone on youtube with a ds3 performance black. Am interested in what you do next
Just put a stage 1 map on from superchips. They have a deal on at the moment so worth having a look!! I'll put the video up soon... I'm on Facebook my info links at the top on my main page.. come and say hello
Hello, your work is very good, did you use the original probes again? Didn't any error appear in the quadrant? Isn't it necessary to do a reprogramming to remove the catalyst?
I did end up with an engine light come on. Which is mentioned in additional videos. I have sorted this by putting a stage 1 map on and reprogrammed the engine light out. Now running amazing!
@@lordeest oooo that'll look mean! Can't say I've seen all that many modded DS3's I'm inclined to say push it further and see where you can take it. Its something different to a M140i or RS3 🤣
Im more intriged as to why it never flagged the EML to come on, especially going to a decat. Cobra even states this will cause the EML to come on, so thats well weird. 🧐
@@lordeest You might end up eventually getting an error code relating to the air bypass circuit if you block it off. Thats the small pipe that sits on the big intake pipe going to the turbo at the back near where the MAF originally sitted, as that sucks in dry air to help crankcase ventilation and the oil trap system. The whole point in this system is to reduce the accumulation of amalgam. This has two beneficial effects: it avoids freezing of the oil trap system in very cold conditions and it reduces the dilution of engine oil by petrol. So if you end up with a P1540 code if i recall, then thats the issue. My Performance only has a straight pipe cat back so far. Awaiting on FMIC coming. 😃
@@dazaman19 interesting... I was not sure what affect this might have so it sounds like maybe I should put it back.. the only code I get is P405 regarding to the cat. Low threshold. Throws up engine fault. Tried an mil cheat but that's not worked... could do with some additional advice if you can chat.. find me on Facebook Lordee ST
Hi pal great video (Ive liked and subbed) - i have 208 gti so same engine and im also looking to decat. Does your stock exhaust have a resonater/mid silencer ? Mine doesnt from stock so just trying to workout if my car would sound like this.
I have a performance black. Had it 9 weeks now. Got a cobra cat back and k and n panel filter, as i couldnt find a cone filter induction kit for it. Got my bits from pug 1 off. Sounds so good now. Standard was just far to quiet for me. Lol. Nice to see someone on youtube with a ds3 performance black. Am interested in what you do next
Just put a stage 1 map on from superchips. They have a deal on at the moment so worth having a look!! I'll put the video up soon... I'm on Facebook my info links at the top on my main page.. come and say hello
Hi, I have your solution: search bull racing. I drive a 2018 performance cabrio . Greets M
Hello, your work is very good, did you use the original probes again? Didn't any error appear in the quadrant?
Isn't it necessary to do a reprogramming to remove the catalyst?
I did end up with an engine light come on. Which is mentioned in additional videos. I have sorted this by putting a stage 1 map on and reprogrammed the engine light out. Now running amazing!
what about emissions when you go to mot? Do you chance old downpipe back?
Hmm... I will probably have to!! Or buy a sports cat. Didn't really think that one through!!!
Sounds mint! What else you got planned for it?
Rear spoiler lip and front splitter.. possible cat back and a map.... then I might move to something else...
@@lordeest oooo that'll look mean! Can't say I've seen all that many modded DS3's I'm inclined to say push it further and see where you can take it. Its something different to a M140i or RS3 🤣
the bottom clamp is on wrong. the loose piece and the bottom edge should fit into the notch of the clamp. the lose piece is now the wrong way around.
I've got a DS3 THP. It would've been far easier and quicker to do all that if you would have taken the front bumper off with a few screws.
That probably would have been a better idea!!
Im more intriged as to why it never flagged the EML to come on, especially going to a decat. Cobra even states this will cause the EML to come on, so thats well weird. 🧐
It has now come on!!!! That was my next video...
@@lordeest You might end up eventually getting an error code relating to the air bypass circuit if you block it off. Thats the small pipe that sits on the big intake pipe going to the turbo at the back near where the MAF originally sitted, as that sucks in dry air to help crankcase
ventilation and the oil trap system. The whole point in this system is to reduce the accumulation of amalgam. This has two beneficial effects: it avoids freezing of the oil trap system in very cold
conditions and it reduces the dilution of engine oil by petrol. So if you end up with a P1540 code if i recall, then thats the issue. My Performance only has a straight pipe cat back so far. Awaiting on FMIC coming. 😃
@@dazaman19 interesting... I was not sure what affect this might have so it sounds like maybe I should put it back.. the only code I get is P405 regarding to the cat. Low threshold. Throws up engine fault. Tried an mil cheat but that's not worked... could do with some additional advice if you can chat.. find me on Facebook Lordee ST
Cow stah ?
Hi pal great video (Ive liked and subbed) - i have 208 gti so same engine and im also looking to decat.
Does your stock exhaust have a resonater/mid silencer ?
Mine doesnt from stock so just trying to workout if my car would sound like this.
Should sound good... tempted to now do a cat back!!
Do you know if your stock exhaust has a resonater/mid silencer?
@@alp7891 not sure to be fair.. I'll check
Your modding a DS3
So?
You gotta be joking
Why bother leaving a comment like this? I bet you're miserable to be around 😂
No.. not joking