Steven Irwin It’s not that amazing. These use the standard LED blades that all sabers from Galaxy’s Edge use (they only fit in one way), and cost hundreds less than the unlicensed ones do.
Yeah Saberforge takes forever to stock them and if you want light and sound they cost 400 bucks man. This thing is less than 200 even with the blade. Yeah the Saberforge one is battle ready but that's not what this thing is supposed to be, and even then the thin neck Saberforges are battle ready with an asterisk, so you still have to be more careful with them. There's only a small set screw on the emitter holding it into place.
@@icedtea9501 it doesn't though, as the technology exists to keep the thin neck and still have a blade. I own a 3rd party saber that does just that, and all the tech in it is better than what these licensed sabers offer. It seems strange to me that Disney still chooses to go this route
@@icedtea9501 I mean, if that works for you I'm glad. I just think it's pretty chintzy of Disney to use such inferior technology. They should at least offer two levels of sabers at different prices with better technology in the more expensive one. They arguably do with the black series elite sabers but that technology is still years behind what third party makers offer in their sabers
@@Matt_Bright_1983 it is possible to create a thin neck lightsaber that supports a blade but i think disney doesnt want to take the risk of people breaking the necks off
"This is your fathers lightsaber..this is the weapon of a jedi knight, not as clumsy, or random as a blaster." Alec Guiness was 63 years old in A New Hope... 13 years older than you are now, and he was cutting arms off, and dueling Darth Vader.
If I were a jedi constructing a lightsaber, the on/off switch would be internal & would have to be ignited by using the force along with knowing where the switch is.
Yes! It’s driving me crazy! I don’t see anyone talking about this. The arrows should be flipped! I have this lightsaber and can’t believe this error. Anyone know if you can pop the arrows out and swap them?
If I remember correctly that deleted scene has since been Decanonized due to extended lore in the comics or something like that about how luke gets his ROTJ Lightsaber, the only time in *OFFICIAL* Star Wars Canon we see the Lightsaber that up close to the switchbox is in Episode 8 The Last Jedi at 1:12:43 with the lightsaber Deactivated and Activated and the Arrows do not light up or blink, I am gonna take a guess that they do blink when Luke puts it into service or repair mode to signify he's tinkering with it, but It's a movie so it's not gonna be completely consistent with a small detail such as the Arrows on the side of the switchbox. All I know is that they do not light up in Episode 8 which was the last time we saw the lightsaber up close the only other time we've seen it recently is in Chapter 16 of The Mandalorian and even then the arrows aren't lit up and you can see the arrow clearly on the switchbox at 34:29 in Chapter 16 of The Mandalorian.
5:36 - There is a delay in the sound between igniting it and the humming. If that happens every single time it's really going to bug me. This is my favorite lightsaber and I've been wanting one for ages now, but man, that one little thing is really going to bother me if it happens every single time. Especially when all the other sabers have smooth transitions between the ignition and the hum.
I noticed the green and red triangles above the switch was out on the wrong way round which is quite annoying 😂 the green triangle should be pointing towards the blade
I really like how they got each ignition sound right. Anakins saber in the new trilogy had given off some weird ass ignition sounds. It’s such a little thing but Lukes saber has that iconic sound that takes me back
One thing I'm happy to gear is that when you fire it up, it has the accurate sound. That was one thing that annoy the hell out of me on the Master Replica and Hasbro. I'm after the Anakin/Luke/now Rey Lightsabre. I don't know why, but I love that one the most
Just got mine right now, so I can confirm they are still there. One thing is they do not have the 36” blades in stock so they are selling the 31” blades you usually get from savi’s workshop custom sabers. Which is actually cool, because it’s between the 36” and 24” blades.
I’m going to Disneyland in April, I’m deciding between this one and Vader’s. Which would you recommend? But if they release Leia’s by that time I’m definitely getting that.
Caden Bernstein-Lawler I debated the same thing when I went and I ended up buying this one. It is a very beautiful piece for sure. Next time I go i will be either picking up vaders or the non reforged skywalker saber if it is back in stock
I've really been enjoying your reviews of all this Galaxy's Edge merch! I can't wait for you to do the Kylo Ren lightsaber, it's the one I'm thinking of getting next! I've noticed you haven't done an Anakin/Luke/Rey lightsaber or the Darth Vader lightsaber, probably because they've been out of stock, but if you're in Southern California, I'd be glad to have you use my lightsabers for you to review for your viewers! I'd be honored to help you make more awesome content!
This has always been by far my favorite light saber. I wish they could figure out a way to have a blade with the original thinner emitter but I guess it’s next to impossible.
The 3 connector rings in the hilt when you unscrew it in 2 can be used to bypass the blade requirement to turn it on. There is tiny holes in the rings and you put a tiny piece of wire connecting them. The smallest and the middle one can be connected to bypass the blade. The hilt will turn on and do sounds without a blade.
@@Bobbthemonkey Those 3 rings connects to the same pins that the blade connects to when you use the fat neck portion. The biggest ring on the outside is power. The middle is data and the smallest one is ground. If you connect the power and ground with an LED it will light up even if the lightsaber is turned off. If you connect the data and ground it will do the same sound it does when you connect a blade and you can then turn the lightsaber on. Technically this could be done with every legacy lightsabers if you connect the data and ground in the emitter hole but it's just much easier to do it on the Luke hilt because it unscrews in half and has those connectors exposed.
@@chamoo232 That’s awesome. I would love to see someone connect a thin blade to the display emmiter and then use a wire to connect through the emmiter to the electronics so you could use a thin blade on the thin neck.
@@mystics1ay3r17 In theory it can be done but instead of going through all that trouble of modifying the blade and emitter it's probably best to just buy A custom Neopixel hilt from one of the many custom saber makers who do that. Korbanth, KR Sabers, Ultimate Works and many other companies specialize in that.
I'm looking forward to your Dark side video!!! btw Thank you for doing all these Galaxy's Edge videos, I can't go anytime soon and it's a huge bummer to me cause I love Star Wars, so it helps watching your vids. May the force be with you.
Great review Sir James! I just purchased the Obi Wan Kenobi lightsaber with blade Oct 21, 2019 at Disneyland Anaheim - Dok-Ondar’s Den of Antiquities shop. No shortages at this time. My blade is 36” and I feel it’s too long. Would like to try a different color though and I heard that you cannot switch blade colors with Obi Wan’s lightsaber from Dock-Ondar’s store. Is this true?
Another great video. Your reviews are excellent - they go into just the right amount of detail. Definitely want this saber now that I know it can be displayed with the thin neck. Fingers crossed the do a similar ANH Kenobi.
One of the lightsabers I want!!!!! Gonna be hard to wait for my trip next year. Been trying to get friends to buy me a couple of these legacy lightsabers.
Very awesome, I've been after that one for a while, my only question is what is the proper blade length just like in the movies, I haven't found the answer to that one anywhere, keep up the good work
36 inches is the canon length of a lightsaber blade according to the visual dictionaries. Some lightsabers like Anakin’s had buttons to adjust the blade length though and the Temple Guard’s lightsaber Pike’s had shorter blades with longer handles.
Hey sir James, another great review! One thing i did realize that was an error on the lightsaber are the arrows. The colors are in the wrong way. It should be reverse
Do you know how much the legacy lightsabers weigh including the packaging? I'm from the UK and will be travelling to Orlando in September so I will need to work out my luggage allowance lol
Hi Sir, Hope this message finds you well. Is it comum to the lightsabers be out of stock on Disney parks? I mean, I will in the US in July and I want to purchase the Anakin saber. I would be have disappointed if the one I want is out of stock. Thanks!!
Michael Grajeda man I was hoping they would have restocked Rey’s lightsaber before my trip tomorrow. I assumed if they restocked Luke, that they might’ve restocked the rest ):
Right? For these things to work irl and the blades to all be compatible with each hilt, there has to be some suspension of disbelief. If we can accept for the most part that the blades are a physical thing that lights up, or that the activation buttons aren’t where you’d think it should be, then the thicker neck for the blade isn’t far fetched.
Hi, I just picked up a Luke Skywalker Legacy Hilt and a Long Blade. I have been trying for over an hour to fit the blade in but nothing is working! If there is any way you can help it would be appreciated, thanks.
Hey man! Question? I also bought the Luke saber but mine is very quite. Is yours actually as loud as in the video? I’m wondering if I need to take mine back. Thanks!
I really don't know why they when with the long blade stock. And give you another emitter when the OG with the choke was fine they could used the anakin blade and used a set screw or just made a neopixels blade with set screw
The buttons do light up in the scene which did not make it to the movie, the scene where Luke first builds and activates the lightsaber in the hut on Tattooine.
So the little green and red arrows beside the ignitor switch. Are they reversed color wise? I just bought the Rotj legacy saber and noticed that the red arrow is pointing up and the Green arrow is pointing down. I believe in the movies it was switched. Also in the special addition Rotj deleted scene where luke is constructing his lightsaber they do light up.
I wish you had the option to use the original thin part versus the wider part. Thank you for the review. This made me realize I should go with another light saber.
Was there today. Belt shortage continues for most sizes other than small, kyber shortage continues. Luke ROTJ, Asaj, Kylo Ren, and Mace were the only lightsabers I saw.
"Now it is big and chubby"
Lightsaber: "Why you bully me"
😂
Big and chubby that’s what she said
@@Clevelandsonlyrealauditsource ah I see your a man of culture as well
*C H U N K Y B O I*
I like em big
I like em chunky
Originally this Lightsaber (in Return of the Jedi) was blue but it was hard to see against the blue sky, so they changed it to green
We know
They would have to change obi-wans saber then since it would look way to similar
Fun fact thank you for telling me
Lucas Vasconcelos Tu é br? Kkk
Lucas Vasconcelos cool!
It amazes me how the official ones can’t manage a blade with the thin emitter yet the saberforge ones can.
Steven Irwin
It’s not that amazing. These use the standard LED blades that all sabers from Galaxy’s Edge use (they only fit in one way), and cost hundreds less than the unlicensed ones do.
Yeah Saberforge takes forever to stock them and if you want light and sound they cost 400 bucks man. This thing is less than 200 even with the blade. Yeah the Saberforge one is battle ready but that's not what this thing is supposed to be, and even then the thin neck Saberforges are battle ready with an asterisk, so you still have to be more careful with them. There's only a small set screw on the emitter holding it into place.
The blade is different. It has a deeper blade insertion depth because it is a neo pixel blade
Is the Luke hilt comfortable
And ultrasabers
Looks pretty decent. Really disappointed that you need the other neck adapter for the blade.
It makes sense tho
@@icedtea9501 it doesn't though, as the technology exists to keep the thin neck and still have a blade. I own a 3rd party saber that does just that, and all the tech in it is better than what these licensed sabers offer. It seems strange to me that Disney still chooses to go this route
@@Matt_Bright_1983 i got it and i love it
@@icedtea9501 I mean, if that works for you I'm glad. I just think it's pretty chintzy of Disney to use such inferior technology. They should at least offer two levels of sabers at different prices with better technology in the more expensive one. They arguably do with the black series elite sabers but that technology is still years behind what third party makers offer in their sabers
@@Matt_Bright_1983 it is possible to create a thin neck lightsaber that supports a blade but i think disney doesnt want to take the risk of people breaking the necks off
I don’t care if I’m 50 years old I want a lightsaber
OK, well get you one... I promise.
Never too old for a lightsaber. I just bought myself the Mace Windu Force FX one for Christmas.
"This is your fathers lightsaber..this is the weapon of a jedi knight, not as clumsy, or random as a blaster."
Alec Guiness was 63 years old in A New Hope... 13 years older than you are now, and he was cutting arms off, and dueling Darth Vader.
*BTS is your life?*
*Now Anime is your life?*
If I were a jedi constructing a lightsaber, the on/off switch would be internal & would have to be ignited by using the force along with knowing where the switch is.
Kael Griffis that’s an awesome idea 😆
Great idea!
Those kinda ones actually exist in Legends
@@atahanonacan415 thats cool
I’ll flip your off switch!! Good luck finding it!!
3:03 I just noticed that the green and red arrows are reversed. It’s a small detail, but one that once you notice it, it haunts you forever.
Gee, thanks
Lol my super old plastic Disneyland model even has it right
Yes! It’s driving me crazy! I don’t see anyone talking about this. The arrows should be flipped! I have this lightsaber and can’t believe this error. Anyone know if you can pop the arrows out and swap them?
JoeyFisticuffs you should try it out lol
Agh, my OCD.....
I'm waiting for Obi Wan/Ben Kenobi lightsaber from revenge of the sith and a new hope
Tyler Hendrickson the will have to do the same thing with the emitter as far as the attachment goes because they are very similar in design
Yeah Luke’s lightsaber was modeled off of obi wans
I want qui gon jins lightsaber
@@gamersgame8886 I agree but I think that saber is too plain. But it would be cool.
Nolan Tillitt Food Tour naw qui gin and Yoda would sell out instantly
The buttons do light up in the movie as seen in a deleted scene
They light up when he's working on it. Never after.
@@LungsOutJem Because you don't see the buttons up close in any other scene.
If I remember correctly that deleted scene has since been Decanonized due to extended lore in the comics or something like that about how luke gets his ROTJ Lightsaber, the only time in *OFFICIAL* Star Wars Canon we see the Lightsaber that up close to the switchbox is in Episode 8 The Last Jedi at 1:12:43 with the lightsaber Deactivated and Activated and the Arrows do not light up or blink, I am gonna take a guess that they do blink when Luke puts it into service or repair mode to signify he's tinkering with it, but It's a movie so it's not gonna be completely consistent with a small detail such as the Arrows on the side of the switchbox. All I know is that they do not light up in Episode 8 which was the last time we saw the lightsaber up close the only other time we've seen it recently is in Chapter 16 of The Mandalorian and even then the arrows aren't lit up and you can see the arrow clearly on the switchbox at 34:29 in Chapter 16 of The Mandalorian.
When you review all the legacy sabers you should do a ranking of them all!
"dew ittt."
I’m honestly not really disappointed with the big alternate admitter, this allows it to be more playable, and less breakable
I can’t wait for your Sith tunic review.
Sir James, are you planning on getting every lightsaber at Galaxy’s edge? If so are you getting two of Maul’s as well
5:36 - There is a delay in the sound between igniting it and the humming. If that happens every single time it's really going to bug me. This is my favorite lightsaber and I've been wanting one for ages now, but man, that one little thing is really going to bother me if it happens every single time. Especially when all the other sabers have smooth transitions between the ignition and the hum.
Just got mine today, and it's very hard to notice, not a big deal to me
Get the saber forge one if that is annoying you, you can get it in smooth swing and you can use your blade with the thin neck on!
I noticed the green and red triangles above the switch was out on the wrong way round which is quite annoying 😂 the green triangle should be pointing towards the blade
I really like how they got each ignition sound right. Anakins saber in the new trilogy had given off some weird ass ignition sounds. It’s such a little thing but Lukes saber has that iconic sound that takes me back
Dude yes
The adapter ruins it for me to be honest
How else would the blade fit?
Have to use the adapter, you do not
Velocity HDMI there’s proper return of the Jedi lightsaber that can use the blade with the thin emitter
@@eriksanchez1721 cool
Same tho
That activation/deactivation sound is spot on. 👌
One thing I'm happy to gear is that when you fire it up, it has the accurate sound. That was one thing that annoy the hell out of me on the Master Replica and Hasbro. I'm after the Anakin/Luke/now Rey Lightsabre. I don't know why, but I love that one the most
Not Rey. We don't talk about her
You didn’t have to scare me with Palpatine at the end...
Just got mine right now, so I can confirm they are still there. One thing is they do not have the 36” blades in stock so they are selling the 31” blades you usually get from savi’s workshop custom sabers. Which is actually cool, because it’s between the 36” and 24” blades.
I’m going to Disneyland in April, I’m deciding between this one and Vader’s. Which would you recommend? But if they release Leia’s by that time I’m definitely getting that.
Caden Bernstein-Lawler I debated the same thing when I went and I ended up buying this one. It is a very beautiful piece for sure. Next time I go i will be either picking up vaders or the non reforged skywalker saber if it is back in stock
good luck going at this point in time no offense
I was super excited to get this saber on opening day of Galaxy’s Edge in WDW. Enjoying your reviews man. Keep it up.
*Oh hell yeah, that green is so badass. I need one*
I've really been enjoying your reviews of all this Galaxy's Edge merch! I can't wait for you to do the Kylo Ren lightsaber, it's the one I'm thinking of getting next! I've noticed you haven't done an Anakin/Luke/Rey lightsaber or the Darth Vader lightsaber, probably because they've been out of stock, but if you're in Southern California, I'd be glad to have you use my lightsabers for you to review for your viewers! I'd be honored to help you make more awesome content!
This has always been by far my favorite light saber. I wish they could figure out a way to have a blade with the original thinner emitter but I guess it’s next to impossible.
I had big kanin Jaris vibes when he switched the peices
That ignite sound is my absolute favorite
Hope u get a Darth Vader one soon. The sith way is the way and only way
Just bought this for dad for Christmas. He’s going to love it!
You're getting really good in front of the camera. You should be proud
Thank you for this review when the park in Florida is open I'm planning on getting this and savis lightsaber thank you again this helped me alot
I don’t understand why people 👎🏻 goods videos
Thank you for your review, I've got someone to pick me up one as I live in the uk. I can't wait for this to arrive
The 3 connector rings in the hilt when you unscrew it in 2 can be used to bypass the blade requirement to turn it on. There is tiny holes in the rings and you put a tiny piece of wire connecting them. The smallest and the middle one can be connected to bypass the blade. The hilt will turn on and do sounds without a blade.
chamoo232 wait how? Can you explain more please?
@@Bobbthemonkey Those 3 rings connects to the same pins that the blade connects to when you use the fat neck portion. The biggest ring on the outside is power. The middle is data and the smallest one is ground. If you connect the power and ground with an LED it will light up even if the lightsaber is turned off. If you connect the data and ground it will do the same sound it does when you connect a blade and you can then turn the lightsaber on. Technically this could be done with every legacy lightsabers if you connect the data and ground in the emitter hole but it's just much easier to do it on the Luke hilt because it unscrews in half and has those connectors exposed.
@@chamoo232 That’s awesome. I would love to see someone connect a thin blade to the display emmiter and then use a wire to connect through the emmiter to the electronics so you could use a thin blade on the thin neck.
@@mystics1ay3r17 In theory it can be done but instead of going through all that trouble of modifying the blade and emitter it's probably best to just buy A custom Neopixel hilt from one of the many custom saber makers who do that. Korbanth, KR Sabers, Ultimate Works and many other companies specialize in that.
Exited for the videos next week man, love the kylo and Mace hilts and Iv not seen many videos on the dark side scrap metal
Thanks for the review! Really disappointed that the blade doesn’t attach to the thin neck. I would’ve bought it if it did!
Everybody gangsta until this man has a Luke Skywalker ROTJ Lightsaber
another great review. Nice to see the stand, interested to get one now!
The fact the saber is not that heavy is very accurate to Luke’s real lightsaber
I need this lightsaber in my life. Is there a Twitter feed I can follow or a website that provides updates on stock availability?
Nicholas Montgomery need this too
Razer Whopper Got it at the end of the July. There have been plenty every time I went to GE since! ;-)
Where are the stands shown in the thumbnails sold?
same place where the legacy sabers are sold out
My favourite one hopefully you can get them in Paris once they open there Star Wars land
RC Drones there opening one in Paris?! That’s super cool!
Noobi Kenoobi Yh hopefully it’s the same as the one in America
I'm looking forward to your Dark side video!!! btw Thank you for doing all these Galaxy's Edge videos, I can't go anytime soon and it's a huge bummer to me cause I love Star Wars, so it helps watching your vids. May the force be with you.
Please bottom line it. The Pros & Cons of Legacy vs the ones you build at Galaxy's Edge
I’m 16 and my fav Star Wars Is return of the Jedi and I’ve always wanted Luke’s green saber so bad!
Great review Sir James! I just purchased the Obi Wan Kenobi lightsaber with blade Oct 21, 2019 at Disneyland Anaheim - Dok-Ondar’s Den of Antiquities shop. No shortages at this time. My blade is 36” and I feel it’s too long. Would like to try a different color though and I heard that you cannot switch blade colors with Obi Wan’s lightsaber from Dock-Ondar’s store. Is this true?
No legacy sabers from the park can switch colors only Savis workshop
This is my favorite lightsaber! I created one at SAvis workshop, next time I might buy the Luke ROTJ saber.
Always been my favorite hilt - will get this when I can eventually afford it 😅
QUICK PLAY are they the real company ones though
That lightsaber looks AWESOME
Also the sith tunic robe and belt I have and are super nice
WHERE DID YOU GET THE STAND
same place as I got the lightsaber
Galaxie edge?
SirJames I Gamerfuzion does it come with the lightsaber or do you buy it seperetly
@@coronavirus2151 separate
How much expensive?
Got it thanks to a more than thoughtful sdcc line buddy! They were back in stock as of yesterday!
Another great video. Your reviews are excellent - they go into just the right amount of detail. Definitely want this saber now that I know it can be displayed with the thin neck. Fingers crossed the do a similar ANH Kenobi.
Just picked one of this one and the Obi-Won saber up a couple days ago when I visited the one in Orlando with my Grandfather.
If you go back soon let me know I would be willing to get the obi wan or the Vader saber along with some kyber crystals.
One of the lightsabers I want!!!!! Gonna be hard to wait for my trip next year. Been trying to get friends to buy me a couple of these legacy lightsabers.
Cool review, enjoyed the outside footage too
Very awesome, I've been after that one for a while, my only question is what is the proper blade length just like in the movies, I haven't found the answer to that one anywhere, keep up the good work
36 inches is the canon length of a lightsaber blade according to the visual dictionaries. Some lightsabers like Anakin’s had buttons to adjust the blade length though and the Temple Guard’s lightsaber Pike’s had shorter blades with longer handles.
Hey sir James, another great review! One thing i did realize that was an error on the lightsaber are the arrows. The colors are in the wrong way. It should be reverse
Nice reviews man!! Keep it going!🤙🏼😎
Would you rather have Luke’s or kylo ren’s? I’m planning to go to Disneyland soon and I would like help making this decision.
Lukes
Definitely luke bro not even a question my friend...
Luke
You should check out the Luke Skywalker ROTJ lightsaber from XTQSabers
I need to know if I can swap the immaculate triangles on the button
will the blade fit ehit the skinner one that has the little hole on the top the other one not the fat ine the skinner one
We’re did you get the Jedi belt ? Was that from Disney too ?
Do you know how much the legacy lightsabers weigh including the packaging? I'm from the UK and will be travelling to Orlando in September so I will need to work out my luggage allowance lol
Hi Sir,
Hope this message finds you well.
Is it comum to the lightsabers be out of stock on Disney parks? I mean, I will in the US in July and I want to purchase the Anakin saber. I would be have disappointed if the one I want is out of stock.
Thanks!!
I love the jacket were did you get it
Love your reviews man!
This is a huge question, do you need a reservation to buy a legacy saber?
Does anyone know if they restocked other lightsabers?
As of tonight (10pm) they had Asaj Ventress, Kylo Ren, Temple Guard and Luke Skywalker
Michael Grajeda man I was hoping they would have restocked Rey’s lightsaber before my trip tomorrow. I assumed if they restocked Luke, that they might’ve restocked the rest ):
Adrian Gomez did they restock Rey’s?
Bear Flores as of yesterday, no. :/
Adrian Gomez did they say when things would be restocked, also what did they have available
Should I be taking the stickers off of the hilt?
I'm not too bothered by the adapter, to be honest. We already contend with the fact that the blade itself is a physical thing that lights up.
Right? For these things to work irl and the blades to all be compatible with each hilt, there has to be some suspension of disbelief. If we can accept for the most part that the blades are a physical thing that lights up, or that the activation buttons aren’t where you’d think it should be, then the thicker neck for the blade isn’t far fetched.
Do you think a 36 inch blade will be easy to handle?
I just purchased this saber, but the sounds aren’t working for me
Those arrows are supposed to light up and flash green and red
Are you closer to land or world? Also where did you get that belt it is very nice
land
SirJames I Gamerfuzion cool we go to Disney land all the time
SirJames I Gamerfuzion it would be cool to meet you. All of your videos have helped me get to know the land an merchandise so thank you
By far my favorite legacy lightsaber ever
👏👏👏👏👏 another flawless review
Hi, I just picked up a Luke Skywalker Legacy Hilt and a Long Blade. I have been trying for over an hour to fit the blade in but nothing is working! If there is any way you can help it would be appreciated, thanks.
AnthonyPlayz it comes with an extra end cap to fit the blade in, right? Look under the box it came in
Hey man! Question? I also bought the Luke saber but mine is very quite. Is yours actually as loud as in the video? I’m wondering if I need to take mine back. Thanks!
I really don't know why they when with the long blade stock. And give you another emitter when the OG with the choke was fine they could used the anakin blade and used a set screw or just made a neopixels blade with set screw
The buttons do light up in the scene which did not make it to the movie, the scene where Luke first builds and activates the lightsaber in the hut on Tattooine.
I have been waiting so long for this.... lol. Great review James :)
Are you going to do the Darth Sidious robe review?
Idk
That’s a must have item I should buy at Disneyland one day
Is this one brighter then the temple guard saber?
is there a way to know when they are in stock or not?
Try visit their website now and again?
So the little green and red arrows beside the ignitor switch. Are they reversed color wise? I just bought the Rotj legacy saber and noticed that the red arrow is pointing up and the Green arrow is pointing down. I believe in the movies it was switched. Also in the special addition Rotj deleted scene where luke is constructing his lightsaber they do light up.
I wish you had the option to use the original thin part versus the wider part. Thank you for the review. This made me realize I should go with another light saber.
Are you able to buy scrap metal?
@@JG-ds6qs huh?
Upon purchasing the hilt will it also include the blade? Or is that a separate purchase?
I thought it said ROTS but then I noticed ROTJ
Looks gorgeous on the belt clip 👌🏻☺️👌🏻
Was there today. Belt shortage continues for most sizes other than small, kyber shortage continues. Luke ROTJ, Asaj, Kylo Ren, and Mace were the only lightsabers I saw.
Kylo and Mace sabers where in stock ? Thank goodness I'm going Friday afternoon to pick up some items I hope they restock Vaders soon
SirJames I Gamerfuzion for sure saw Mace and a Kylo saber. At least they are in the display but Maul wasn’t so maybe a chance.
I really like your PlayStation jacket! 😱🤣💙 where did you purchase it?
Years ago on insert coin
Is there a way to get legacy sabers online? I live in New Zealand 🇳🇿
Through Ebay from online scalpers but the AU conversion for me is way too much to justify buying one.
which one do youi prefer ? Ankin's lightsaber o luke's saber ?
i have the Vader one cant wait to see what this one looks like
About how much does the saber in the box weigh?