I really want to thank you guys for posting such useful videos! I'm referring these for a complex interview and am finding these videos so resourceful!! A grand thanks for the great effort put in!
Hi Sir, Sir I'm confused after looking into the routing table. The loopback is 11.0.0.0/24 with the ip's 11.0.0.1, 11.0.1.1 11.0.2.1 and 11.0.3.1 but '/24' has 24 bits fixed for network how there can be a change in third octate/block. Isn't it is supposed to be 11.0.0.1, 11.0.0.2, 11.0.0.3.. anyone's help will be appreciated, Thanks
sir i have a doubt on the 10.0.0.0 network and the other 4.o.o.o network, as you said we dnt have to mention mask while advertising the network , What if thr subnet for that interface is /24 , as per my understanding its better to advertise mask as well , i think by default its taking the mask to 10 and 4 network which is nothing but class A /8
Thank You Sir.But there is a problem with my packet tracer V.7.3.1. It is saying that " Packet Tracer does not support internal BGP in this version. Only external neighbors are supported " .Is there any solution ?
sir , i have done all configuration as per your video on gns 3 using os c2691, but i cant receive 20. and 40 network on router one..please help me to tHSOOT
Hi. I know your comment is three years ago, but I believe his/your ibgp routers have to be either full-meshed, or configure one of these 4 routers as a route-reflector, then it will work! Thanks!
for those who are confused with the network advertising. he refers to the classes of the IP. BGP 'll recognise the IP if it's class a then without mask it will refer as /8 . and in routing table if we have mentioned as /24 for a class a then we need to mention that too in network advertisement too. this is as per my understanding. correct me if am wrong.
True. His ibgp routers have to be either full-meshed, or configure one of these 4 routers as a route-reflector, then it will work (since he did not configure an IGP in this lab)
I really want to thank you guys for posting such useful videos! I'm referring these for a complex interview and am finding these videos so resourceful!! A grand thanks for the great effort put in!
Very Resourceful and informative. Thanks for sharing this.
Great lessons.
I just started this course and I wanted to know which tool you are using for the labs.
Really enjoying your videos, thank you for your efforts !
Your explanation is very simple and to the point. Thank you so much
Hello sir, why we only configure loopback address in router1 . Not in all router?
Hi Sir, Sir I'm confused after looking into the routing table. The loopback is 11.0.0.0/24 with the ip's 11.0.0.1, 11.0.1.1 11.0.2.1 and 11.0.3.1 but '/24' has 24 bits fixed for network how there can be a change in third octate/block. Isn't it is supposed to be 11.0.0.1, 11.0.0.2, 11.0.0.3.. anyone's help will be appreciated, Thanks
Why my fast ethernet not coming in gns 3.
I have assigned IP but its down after no shutdown config
Sir , awesome explained in the video.
The topology is not working for full mesh without IGP. Can you pls help to resolve my issue?
Alhamdulillah
explained each and every term very simply, make it easier to understand
Saale chutiya
Why we need ibgp when we can advertise the routes by any IGP like OSPF, EIGRP or RIP. Please answer
in R1 added lan network subnetmask /24 is it required?
respected sir,
please provide us the link of notices you use...
How to get the lessons slides?
Sir if I'm not wrong, IBGP is done in full mesh ? why you configured only directly connected ones?
Hey!
Can you tell me how you set up these labs?
This is a practical session you should tell us in brief about how you have done that.
Sir which simulation do you use for IBGP.
As in packet tracer IBGP does not support.
Please help
Use GNS3.
Hi sikander,
how to get your bgp notes..? I mean how can i get those notes if its available..?
sir i have a doubt on the 10.0.0.0 network and the other 4.o.o.o network, as you said we dnt have to mention mask while advertising the network , What if thr subnet for that interface is /24 , as per my understanding its better to advertise mask as well , i think by default its taking the mask to 10 and 4 network which is nothing but class A /8
can not find continuation of this video please share
If the mask is higher than the default value you need to advertise the route with the mask
Very nice explanation keep going......
Sir mere hold timer bar bar expire hojata Hai why so
Thank You Sir.But there is a problem with my packet tracer V.7.3.1. It is saying that " Packet Tracer does not support internal BGP in this version. Only external neighbors are supported " .Is there any solution ?
Use GNS3 mate
@@cutesammie hey man , which cisco routes to use in gns3 can we have free images of those routers ?
@@punkeyengineer use cisco IOSv router that will be fine
Which software are you working
Did you find the answer?
sir , i have done all configuration as per your video on gns 3 using os c2691, but i cant receive 20. and 40 network on router one..please help me to tHSOOT
Hi. I know your comment is three years ago, but I believe his/your ibgp routers have to be either full-meshed, or configure one of these 4 routers as a route-reflector, then it will work!
Thanks!
for those who are confused with the network advertising. he refers to the classes of the IP. BGP 'll recognise the IP if it's class a then without mask it will refer as /8 . and in routing table if we have mentioned as /24 for a class a then we need to mention that too in network advertisement too. this is as per my understanding. correct me if am wrong.
Sir, thanks for the thorough explanation. Greatly appreciate it.
Can I ping any of loop back ip from different router?
yes if u have routing configured between them
it's very clearly explanation.
Plus R1, R2, R3, R4 are not able to ping 30.0.0.1 40.0.0.1 10.0.0.1 20.0.01 resp
True. His ibgp routers have to be either full-meshed, or configure one of these 4 routers as a route-reflector, then it will work (since he did not configure an IGP in this lab)
If have can you share the link to download
the video ends without explaining why the R3 routes are not being shown on R1
complete sir
tq
thanks sir so please tell me your address master