That was heartbreaking to watch! I hope the pilot is able to identify the reason and to eliminate the problem the in the next build. Wow this plane was unbelievable fast!
"I was only climbing with 2/3 throttle!" he said. Exactly that is the problem. On full throttle the Mosfets dont have to switch that much as on 2/3, so they will become hotter on 2/3 throttle. Anyways, nice bird and I hope it will flight again soon.
Oooh the magic smoke! I hate that. And even if anything is technically recoverable (not looking good in this case), it is covered in stinky sticky residue... my condolences on your loss.
Pushing and pulling that many amps its only a matter of time before the magic smoke shows itself, but if a good time is had before it does then its totally worth it 👍
Der sound bei Halbgas ist unglaublich - Resonanz? Hoffe euch mal zu begnen und es live zu sehen, die Dialektsituation zeigt ihr könnt nicht weit weg sein.
Es ist unfassbar...welche Energie die heutigen Antriebe abgeben können...aber man ist immer an der Grenze von allen Antriebskomponenten. Das ist der Grund...warum ich lieber DS fliege...da fängt zumindest nix an zu brennen...😂
Perche' lanciate questi modelli da fermo , e' bruttissimo vederli in evidente assetto di stallo , salvarsi solo grazie alla spinta del motore....basterebbe correre un po' e dare il giusta slancio con il braccio...non e' difficile ! Per il resto mi complimento , un vero missile RC ! Saluti dall' italia che vola
My goodness ... what is the approx power of this thing? Anyway great plane! Wanna go even faster? You're flying at very low lift coeff, meaning that the plane is much faster than best glide speed. So, if you cut down the wing to about half the span, drag will be reduced at high speeds.
CO² Feuerlöscher haben auch eine kühlende Wirkung als neben Effekt , echt schade um das Modell aber immerhin kein total verlußt und ganz wichtig niemand ist zu Schaden gekommen
Someone needs to integrate the tech of this plane's aerodynaminticity into Cessna Citation Bravos and Encores, heh. They're not called "Slowtations" for nothin.
Sind in der Regel mit Epoxidharz getränkt. Nach der Aushärtung gibt es eine sog. Glasübergangstemperatur. Das ist ein Temperaturbereich der das gehärtete Material je nach Geschwindigkeit der Energiezufuhr gummiartig werden lässt. Bei Standardharzen im Bereich zw. 60-100°C.
Dieses Gegackerer und Gelache im Hintergrund würde mich echt nerven! Man ist dort in extremer Konzentration, wo jede Unaufmerksamkeit zum Unglück führt und dann so ein Publikum im Hintergrund 🤮
You could hear something was wrong, maybe it lost a bearing. These motors don't look capable of what they're doing, they're only 500kv?? He must be using a super aggressive prop which stresses the esc and motor a lot, I wish I knew what kind.
Great pilot, great build. Both equally impressive.
That's some brave SOB's on the flight line.
One glitch and they're dead.
Germans are King's of RC. 🤴
Agreed!
HOLD.MY.BEER......... ua-cam.com/video/4eFD_Wj6dhk/v-deo.html
EXCELENTE 👍👍👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻 🇧🇷
That was heartbreaking to watch! I hope the pilot is able to identify the reason and to eliminate the problem the in the next build. Wow this plane was unbelievable fast!
You could.
Hear the mosfets chiming on that last run.Definitely something wrong and that was mosfet's popping at the end
Technically brilliant,no doubt about it-but it's also a highly lethal missile at the end of nothing more than a radio link!
At least he got the wing off in time, probably the most important part.
"I was only climbing with 2/3 throttle!" he said. Exactly that is the problem. On full throttle the Mosfets dont have to switch that much as on 2/3, so they will become hotter on 2/3 throttle. Anyways, nice bird and I hope it will flight again soon.
No, the problem is that it's a Volkswagon. They spontaneously combust for no reason.
@@FarmerFpv - p r a t
The FETs are either full on, or full off in a pwm system, the load ( below the rated current ) has little effect
I've had great luck with YGE ESC's, haven't had one go up in smoke yet
ua-cam.com/video/4eFD_Wj6dhk/v-deo.html
Oooh the magic smoke! I hate that. And even if anything is technically recoverable (not looking good in this case), it is covered in stinky sticky residue... my condolences on your loss.
😂🎉🎉🎉🎉🎉🎉
Wow! It was so fast it looked like the video was sped up, clearly isn't
Saved the wing, a good thing!
Pushing and pulling that many amps its only a matter of time before the magic smoke shows itself, but if a good time is had before it does then its totally worth it 👍
Super fast! I love the sound. I always worry about my little speed plane catching fire because I push it pretty hard.
game over
That was smokingly fast!
ua-cam.com/video/4eFD_Wj6dhk/v-deo.html
Damn that's moving, but Dynamic Soaring is where the speeds at..
I don’t speak gibberish but I think they were saying fuck it’s on fire!
I don't think those helmets would have provided any protection.
But they make you feel good.
Hotliner with smoke system for tracking. 😎
Der sound bei Halbgas ist unglaublich - Resonanz?
Hoffe euch mal zu begnen und es live zu sehen, die Dialektsituation zeigt ihr könnt nicht weit weg sein.
Daaam, I remember my friends 700 size electric heli. It was trailing smoke behind it like my nitro heli. We where both like oh no thats not good. 😂
You've angered the Gods. Your ESC will be used as an offering.
Es ist unfassbar...welche Energie die heutigen Antriebe abgeben können...aber man ist immer an der Grenze von allen Antriebskomponenten.
Das ist der Grund...warum ich lieber DS fliege...da fängt zumindest nix an zu brennen...😂
Good job 👏
SUPER CLASS
Nice Video!
Keep on flying!
richtig heißes teil! 😅
Immer diese Elkos. Hatte sie jetzt in etechnik gehabt
All that preparation and top class equipment and no pliers to disconnect the batteries in the event of a fire. Or even wire cutters! 🙄
Holy smokes 😳
So, you turned your fuselage into a surface mount re-flow oven...
Spitz Zange mit dem anfassen .. und alles raus holen
I don’t know this model but I know RC aviation and that motor/ESC sounded laboured early on
I assume, the prop pitch is very high to allow these high speeds, so in slow flight it will not work well or even stall.
I see his safety hard hat helped the day, if he had also worn a hi viz vest this would not of happened
I would love to know what the scale speed is ...
4:59 fängt die Identitätskrise an… Sogar Pulsejet-ähnliche Geräusche werden produziert 😂.
Perche' lanciate questi modelli da fermo , e' bruttissimo vederli in evidente assetto di stallo , salvarsi solo grazie alla spinta del motore....basterebbe correre un po' e dare il giusta slancio con il braccio...non e' difficile !
Per il resto mi complimento , un vero missile RC !
Saluti dall' italia che vola
War das Mach1 ?
Wharp 2 😂
My goodness ... what is the approx power of this thing?
Anyway great plane!
Wanna go even faster? You're flying at very low lift coeff, meaning that the plane is much faster than best glide speed. So, if you cut down the wing to about half the span, drag will be reduced at high speeds.
German engineering?
Rip, hört sich geil an und fliegt schnell. aber leider in qualm aufgegangen xD
Soo True!!!!! Especially that voltage an ampridge
It sounds wicked.
That's the worst smell, and it lingers on everything !
Nothing unusual about an EV self combustion.😂😂😂😂😂 Just so typical of lithium batteries.😂😂😂
What type of motor is that dude? can you tell me the spec?
Something flew off the plane at 2:04
True, pilot ejecting?
@@autogyro333 😄
That’s your problem; letting one of the Village People try to fix your plane.
He was lucky that the battery wasn’t a thousand times bigger and parked next to his house.
yes true in an imaginary situation but what would he need a huge ass 1000X bigger lipo battery parked next to his house for?
What speed do you know?
450kph
I don’t understand how the wings did not get torn off or how the air frame withstood the G forces….
This smell is something terrible... will stay forever on your hands... lol
yeah an electric batter burn or esc is an acrid smell.
Is it made by Volkswagon? They spontaneously combust for no reason.
An ESAC for such a plane should have a Mosfet temperature telemetry sensor! Avian ESC (Spektrum) have such sensors!
Note to self: When at the field pushing lipo's to the limit bring my welding gloves 👍.....
Regler failure?
gloves?
It melted, should gav used fire extinguisher to stop the fire. Ach du lieber. 😳
Fire extinguisher has no effect on a Lithium fire unfortunately
@@JordanColeman-r8w I have a few, stored in metal ammo boxes, so yeup scary stuff.
CO² Feuerlöscher haben auch eine kühlende Wirkung als neben Effekt , echt schade um das Modell aber immerhin kein total verlußt und ganz wichtig niemand ist zu Schaden gekommen
Battery decided to let go. What a shame. Crazy plane though but it’s got nothing on that one that drone that chased the red bull F1 car at 250 MPH.
ayayayay...
That is an OMG plane
哈喽，这飞机pnp多钱
jetzt nur 100€😂😂😂😂😂
looks like about 1400 euro
You know what they say: "It you have to ask, you probably can't afford it!"
hope the pilot got out ok.
Pilot and observer need protection. Substantial barricade.
That good by to one dangerous RC aircraft, too fast to safe in my opinion.
That flight wouldn't have been cheap...
Someone needs to integrate the tech of this plane's aerodynaminticity into Cessna Citation Bravos and Encores, heh. They're not called "Slowtations" for nothin.
yeah
it’s horrible! I once burnt a ESC, I couldn’t get that smell off my hands 🤢
This is what concerns me about manned electric aircraft. 😅
CFK kann also "schmelzen" das war mir auch neu.
Waren das die Rügener?
Sind in der Regel mit Epoxidharz getränkt. Nach der Aushärtung gibt es eine sog. Glasübergangstemperatur. Das ist ein Temperaturbereich der das gehärtete Material je nach Geschwindigkeit der Energiezufuhr gummiartig werden lässt. Bei Standardharzen im Bereich zw. 60-100°C.
ab 5:40 gehts los
It needs a faster way to get the batteries out
A fuse would have been cheaper...
I want this
It was in trouble as soon as it was launched from hand
I thought my modded ef16 edf jet was fast at 120mph 😅
charge at 3.6 milivolts each battery.
Breathing that shit in can’t be good for your health.
Real smart breathing in those poisonous fumes🙄
Dieses Gegackerer und Gelache im Hintergrund würde mich echt nerven! Man ist dort in extremer Konzentration, wo jede Unaufmerksamkeit zum Unglück führt und dann so ein Publikum im Hintergrund 🤮
dont use made in china battery😁😁🥰😇
Nearly every lipo is made in China 😂
А больше ни где не производят вы о чем. Производит только Китай.
It was the esc that popped not the battery, if the battery went it would have been way more powerful.
breath in that chemical smoke, it has to be good for you
Jes,,i think the same,,bit in this situation🤷😂😂😂😂
Ich bin schtoopid!
You could hear something was wrong, maybe it lost a bearing. These motors don't look capable of what they're doing, they're only 500kv?? He must be using a super aggressive prop which stresses the esc and motor a lot, I wish I knew what kind.
😢
Never a good look for Electric powered anything.. 1 crispy critter a bit sad was a nice looking model before it self combusted..
stupid variant of model airplanes
The one I built is faster. Much faster