I was laughing every time Dan would pull out a leg and put the wrong end in first on all 4 legs. That thing looks cool, I am going to have to buy one. I like the surprise lets see whats in the box video.
I like it for the most part. As I've said in the past, I'm a huge fan of portable work surfaces. You absolutely positively cannot have enough. I do probably half my work on site and I mainly use saw-horses and folding tables. Work surfaces are important to me because I hate working on the ground. The added feature for this product is the router slot. Honestly though, I would maybe use this like 3% of the time, but it is still a nice option. Still the same, I would buy one.
I was looking for a small workbench that I could put away after I didn't need it anymore. This is great. For 70 buck even better. I was ganna "try" and build some sawhorses or just get a jaw horse n plywood but man I'm glad I waited . Thanks TIA. Great review. Great timing.
set up is a bit more involved than the push button set up of the work table but worth it for the features, the quality and thickness of the plastics make it as strong as any metal table I've used with the big advantage of being able to collapse it to a small footprint for storage and a $70 price tag...its a no brainer! great review guys, shame about all the injuries..lol
i have the husky workbench which was the same as the Keter you guys reviewed a while ago and its been an awesome table, I have stood on it and I aint light 350lbs and I have stripped engines on it built lego on it you name it, I am definitely gonna pick up one of these just based on the quality and usability of the work table!
I bought and returned that long ago. The router plate had far too much flex in it. Also the router plate is not either of the two standard sizes, so not easily replaced with a third party one. I bought a different Keter version in sale at BJs with height adjustable legs.
Is it safe to say this table bites back, 2 bleeps cause you done got pinched...looks like great little work table sometime in the future hook a router up and give her a test run..the trim router might be difficult cause there bases are so small...so I'm sure you would have to make holes for that
Apart from the fact it looks to be physically dangerous to your fingers, this looks like a great table. Fibre reinforced plastics these days are super strong.
How is the plastic structure under the surface? I don't think I've seen a work table go through its first week without someone sawing into it. I'd be worried about the thin plastic being weakened too much
I bought this work bench table on Friday and tried to install my Ryobi router to which the universal plate pre-drilled holes don't line up at all. Plus you'll never see any videos with a router installed on it anywhere online, I looked everywhere for such video. The video Home Depot shows is after the router is secured to the universal mounting plate and the guy is putting plate back on table, I've sent Home Depot a not so pleasant email about this. If these guys were going to make a video then show the table's capabilities of what it can do instead of this nonsense.
This table sucks. The plate fits nothing I could find at Home Depot routers which were like 4. Took plate with me and couldn't get anything to line up with pattern.
Sorry im late to the party but just wanted to say the router plate isn't really the show its more like " hey might as well throw this in " The show is the strong portable table for around 50 bucks Now if the height was adjustable it would make a great portable tablesaw outfeed/work bench 👍
Hey guys I really enjoy the videos and reviews, I was wondering if you guys can do a review on the festool planex with the ct 36 vac , thanks Anthony from newyork
It would have been nice if they would have put a straight edge on it. Most of their reviews they just yap yap, they don't even open tool boxes and show you the inside or anything...
Great video guys and awesome table I'm just a lil afraid of how many times I'm gonna cut myself b4 I actually set it up lol!! Dan ur hilarious bro! T.I.A#1!!!!!
Well, I learned 2 things about the workbench from watching this video. 1 - you can sit/stand on it. 2 - you can nick your finger on some of the edges. Didn't see any of the real functionality of the bench.
Man you guys are having a bad day. Both cut yourselves plus 0/4 on getting the legs the right direction on the first try. The table is nice though at least.
I like the kreg better but keep dan away from it he will pinch his wee little fingers because im sure he would not take time to read the warning label. The kreg is easier to set up. Heyyyyy its about time for you to put a first aid kit in your shop ya think?
What a waste of time watching this video. I stopped when Dan (I suppose) said they weren't going to put a router in the table. I know how to setup the table, that is not hard, but how do you put a router underneath?
![Gotye - Somebody That I Used To Know (feat. Kimbra) [Official Music Video]](http://i.ytimg.com/vi/8UVNT4wvIGY/mqdefault.jpg)
TOOLS IN ACTION?? Where is the action, The one TOOL hurting himself.
Worst cunts ever
They should be on radio
This is by far the most aptly-named channel on UA-cam.
Daedolon LMAO
I was laughing every time Dan would pull out a leg and put the wrong end in first on all 4 legs. That thing looks cool, I am going to have to buy one. I like the surprise lets see whats in the box video.
Russ Webster lol
Russ Webster Me too HaHa!
I also think he couls start a couple of lawsuits against them too lol!
Hahahaha I just saw this! That's hilarious!
I like it for the most part. As I've said in the past, I'm a huge fan of portable work surfaces. You absolutely positively cannot have enough. I do probably half my work on site and I mainly use saw-horses and folding tables. Work surfaces are important to me because I hate working on the ground. The added feature for this product is the router slot. Honestly though, I would maybe use this like 3% of the time, but it is still a nice option. Still the same, I would buy one.
Blood was shed to make this video. Thanks for putting your blood sweat and tears into making TIA so awesome :)
Justin Hernandez Thanks man!
I was looking for a small workbench that I could put away after I didn't need it anymore. This is great. For 70 buck even better. I was ganna "try" and build some sawhorses or just get a jaw horse n plywood but man I'm glad I waited . Thanks TIA. Great review. Great timing.
iilover doe YW :} its an awesome table
I watched Dan unbox the table on periscope. That table is nice.
"I cant believe how easy this is!" Puts the legs on upside down every time before he turns them the correct way...
Gotta admit that is a cool idea. Keeter makes good stuff from what I have seen. I have a Husky socket set that works great.
set up is a bit more involved than the push button set up of the work table but worth it for the features, the quality and thickness of the plastics make it as strong as any metal table I've used with the big advantage of being able to collapse it to a small footprint for storage and a $70 price tag...its a no brainer! great review guys, shame about all the injuries..lol
TheBearuk1 Tha Bear!
when the legs are stored in the table the whole thing is no more 4" thick
I have a husky folding utility knife. I bought it 3 years ago. I carry and use it every day. I bought it for $7.
i have the husky workbench which was the same as the Keter you guys reviewed a while ago and its been an awesome table, I have stood on it and I aint light 350lbs and I have stripped engines on it built lego on it you name it, I am definitely gonna pick up one of these just based on the quality and usability of the work table!
TheBearuk1 Sweet
That is a really nice portable work bench. For $70 I'm on board. I always wanted a portable router table for the job site.
I bought and returned that long ago. The router plate had far too much flex in it. Also the router plate is not either of the two standard sizes, so not easily replaced with a third party one. I bought a different Keter version in sale at BJs with height adjustable legs.
That's a nice router table. Never had any husky products really cool.
this thing looks awesome. I've been searching for something like this for a while now. thanks for bringing this to light. later crew
Nalu Rash yw Nalu
I would like to see you guys use this. Maybe try out the router table. How flat is it? I like the concept of it.
looks like a great table.
Nice looking bench and router table for a good price. Nice job guys
not bad for the price and east storage.i keep missing the filming scopes.
Just got one of these. How do you connect your router to the under side of the table? And will any router fit? Thanks
Sucks, I missed this Periscope. Any who, I think I may have to pick this up for the workshop.
-Steven
I think I am sold on this!
Y'all said it's adjustable. I don't think it's adjustable. But good video. And the clamps comes separately.
Oh yeah, shout out at the beginning!
Is it safe to say this table bites back, 2 bleeps cause you done got pinched...looks like great little work table sometime in the future hook a router up and give her a test run..the trim router might be difficult cause there bases are so small...so I'm sure you would have to make holes for that
I'm looking for a portable router table. I'll look into one of these. Thanks guys
Apart from the fact it looks to be physically dangerous to your fingers, this looks like a great table. Fibre reinforced plastics these days are super strong.
Chris Ryan lol
Great worckbench
Man you guys were crazy on this video . Fun to watch you guys tho great videos .Dan was acting like me when I first wake up lol .
Can the plastic tabs that are used to store the legs be replaced
Nice table. Make a video to show how it works, please
Nice video, thanks. The guy in the bowling shirt, get him on a sitcom or some tv show! 😁
How is the plastic structure under the surface? I don't think I've seen a work table go through its first week without someone sawing into it. I'd be worried about the thin plastic being weakened too much
resqrt it is very sturdy
Can you turn your video camera horizontal next time..so the picture will fill the monitor, instead of a skinny vertical picture...
I bought this work bench table on Friday and tried to install my Ryobi router to which the universal plate pre-drilled holes don't line up at all. Plus you'll never see any videos with a router installed on it anywhere online, I looked everywhere for such video. The video Home Depot shows is after the router is secured to the universal mounting plate and the guy is putting plate back on table, I've sent Home Depot a not so pleasant email about this. If these guys were going to make a video then show the table's capabilities of what it can do instead of this nonsense.
+D Spencer Yes Sir
This table sucks. The plate fits nothing I could find at Home Depot routers which were like 4. Took plate with me and couldn't get anything to line up with pattern.
Sorry im late to the party but just wanted to say the router plate isn't really the show its more like " hey might as well throw this in "
The show is the strong portable table for around 50 bucks
Now if the height was adjustable it would make a great portable tablesaw outfeed/work bench 👍
Looks like a nice setup. What is the router insert plate made out off. The price seems to be a good deal.TIA crew
Charlie Thompson ABS
That's definitely on the "to buy" list, great vid.
looks very cool and a great price. lol dan you need a first aid kit in ur shop.
Peter Wettersten so true
These guys have over 100k subs!
Hey guys I really enjoy the videos and reviews, I was wondering if you guys can do a review on the festool planex with the ct 36 vac , thanks Anthony from newyork
Anthony Cerami Hi Anthony we can try.
I want to see what all the attachments do.
Bought one today.
Looking at his hand like wanting to cry.
I saw some brand new Ridgid stuff on the floor!!! are we gonna get a new Gen 5 review!?!?
AB Positive Bulldogs Yes :}
I want to see these guys build something insane a race truck , a nice shed something. 😂🤣.
anyone know the thickness of the router plate? Looks like something that could be fabricated to suite your own tastes. thank you
These guys should review Band-Aids instead of tools.
I like it!
this table fits ALL major routers If you guys can't figure that out you shouldn't be making videos lol
Does it come with any sort of fence?
Jack Tibbetts You can use a 2x4
too bad they don't have this Canada. I'd buy 2 today.
order online from home depot
so any router fit in this table ????
choose one. UA-cam or parascope. interested in product but did not connect with video.
Did you cut yourself on the portable worktable?
Tae Garfman Yea s sharp piece pf plastic
Both Eric and Dan cut them selfs all in one video
Logan P so true
how can I just order the different clamps for the keter workbench.
+ozzie Bunsie Contact Keter
It would have been nice if they would have put a straight edge on it. Most of their reviews they just yap yap, they don't even open tool boxes and show you the inside or anything...
so when are you gonna send me one I always try to keep things small and lightweight while I take it to a customer.
Set the days without incident calendar back to 0 now haha
HuntingWolf82 lol
the legs, how many times man?
Great video guys and awesome table I'm just a lil afraid of how many times I'm gonna cut myself b4 I actually set it up lol!! Dan ur hilarious bro! T.I.A#1!!!!!
Mike Z lol
this is only my second video but i'm guessing this dude hurts himself a lot. :)
wow nice!
make sure you have LOTS of bandaids....geeeezzzz
Well, I learned 2 things about the workbench from watching this video. 1 - you can sit/stand on it. 2 - you can nick your finger on some of the edges. Didn't see any of the real functionality of the bench.
me too
Its a strong portable table for around 50 bucks
Oh my Gosh! Dan hurt himself!!!!! AGAIN!!!!!!!
Chris K lol
"Oh Keiter makes your life easier" Huh? Oh never mind.
Man you guys are having a bad day. Both cut yourselves plus 0/4 on getting the legs the right direction on the first try. The table is nice though at least.
you guys are great really funny to watch. funny you amuse me #goodfellows
mitchell gonzales Ha Ha
It really bugs me when people start their sentence with whatsup.Stop saying you guys for fuck's sake.
What's up man, why so sad?
what's up dude. man life must be so bad for you, hope you have a better year next year. take care. love you
So no one knows which Routers fit this table?
Im a fan guys, but this video was a poor effort.
Kahunaz awe
Every video showing this husky table never show a single router being used on it. Guess it’s up to me
husky its great
lower your intro sound a little, otherwise great video
jessejames! Yes sorry!
"still jamming"
worst review ever
High five
Tool's inaction
I don't trust any router table made of plastic. It might work well as a workbench though, and the price is attractive...
Tool review with a bad attitude, thanks.
Dam that's a dangerous table lol
jesus christ! you messed up with every leg
+1loobie Jesus was not in this video. We have asked him to come on the channel though.
I like the kreg better but keep dan away from it he will pinch his wee little fingers because im sure he would not take time to read the warning label. The kreg is easier to set up. Heyyyyy its about time for you to put a first aid kit in your shop ya think?
Looks like a total waste of money to me, guess I'm old fashioned and prefer my site built saw horses.
What a waste of time watching this video. I stopped when Dan (I suppose) said they weren't going to put a router in the table. I know how to setup the table, that is not hard, but how do you put a router underneath?
Dewalt tools in an Milwaukee toolbox.... Dewalt is not worthy....
ricky precise lol
Do a proper review you clowns.
Loud mouth.
soft pas. lol
It's not keter