good tip, but a dewedge riser, maybe on top of the deck, should work better to don't sacrifice the bushing compression. I will give a secon try when I get back the trucks
Great thing is that you understand the fundamentals of what distinguishes each truck and board from another. With your custom modifications You have essentially reproduced the functionality of much more expensive boards. Kudos!! You are an amazing skating Maven.
4:30 The tech and camera to make the camera disappear is amazing. Anyone know what camera he is using? And is the stick part of the camera kit, or does any work?
I just got two major arc trucks but so far I have mounted only one at the front as a test. It's really great at turning. The problem with this configuration is that the "back" of the board is higher because of the different truck. Being a drop through, I am planning to add some risers on the top of the board at the back only, as in a drop through they actually lower the height from the ground. I am also wondering whether it's worth testing the major arc with a combination of barrel/cone bushings instead of the double barrel the trucks come with. Perhaps not as they are already superturny
yes your solution is going to work pefectly, if you like the pumping it would make sense the other way around, I mean mounting the major arc under the deck and not as drop through, and the back as regular drop through without risers, higher the board easier the pump. About the bushing I will stick with barrels, it could make sense to go even harder with the bushings instead of having conic. The first prototype was barrel conic and we figured that was better double barrel.
ma qualsiasi skate da trick e gli cambi le ruote per delle 58mm 78a o 56mm 78a (come questo amzn.to/2GLM7EB ) ...o se la tua priorità sono comunqe i trick resti su 58mm 100a o anche 56mm 100a larghe
ciao adoro i tuoi video,e tu sei molto bravo a spiegare si vede che c'è passione ! io sto iniziando da poco e avrei bisogno di un consiglio.. Sono abituato ad usare i ripstick o waveboard poiché non poggio piede a terra per spingere e non perdo equilibrio, ma vorrei acquistare uno skate che mi permetta di fare lo stesso ma su 4 ruote anziche 2...puoi consigliarmi qualcosa per iniziare? Considerando che farei lunghi tragitti e non brevi, e per i trik lascio perdere che sono negato hahaha grazie mille, buon giornata e continua cosi !!!
per lunghi tragitti waterborne senza ombra di dubbio li batte tutti, puoi prendere il solo adattatore da loro o il penny waterborne amzn.to/334HWeC senza dogana e spedizione che poi se vuoi in futuro puoi metterci una tavola lunga per andare piú veloce con meno fatica
Ti vorrei chiedere un altra cosa se vuoi potrrmmo parlarr da instagram ma ci terrei a chiederti cosa ne pensi del pintail della decathlon che è flessibilissimo e rialzato tipo io lo odio nn capusco proprio come ci si riesce a stare sopre
io ho la versione anteriore, non rialzata ..noioso perché gira pochissimo, ci misi l'adattatore waterborne e ora é perfetto ...ma questo tuo suppongo che quando ci sali sopra debba piegarsi e tornare piatto, ovvero il rialzamento dovrebbe ammortizzare, non lo fa?
that's depend how wide is the deck, not with the one they sell ..yes with another deck I used whivh was very wide. With a standard longboard you are safe
@@SkateTherapy Thank you for posting this somewhere! I do think you should leave pricing on your website, it was super frustrating trying to track the info down!
Fatevi un favore e guardatelo in italiano voi che potete XD ua-cam.com/video/b7UWV_5SUXw/v-deo.html
Lower back truck angle from 50 to 45 by flipping hanger also. even more by using shallow bushing in bottom.
good tip, but a dewedge riser, maybe on top of the deck, should work better to don't sacrifice the bushing compression. I will give a secon try when I get back the trucks
G bomb adaptor with illuminati board. Don’t trip poppy truck up front. Tracker truck in back. ULTIMATE LDP SETUP!
I hope to try it someday, can't really buy it :) very cool, but expensive stuff
Great thing is that you understand the fundamentals of what distinguishes each truck and board from another. With your custom modifications You have essentially reproduced the functionality of much more expensive boards. Kudos!! You are an amazing skating Maven.
Ciao sei grande bel video
4:30 The tech and camera to make the camera disappear is amazing. Anyone know what camera he is using? And is the stick part of the camera kit, or does any work?
insta360
@@SkateTherapy
Thank you!!!
I just got two major arc trucks but so far I have mounted only one at the front as a test. It's really great at turning. The problem with this configuration is that the "back" of the board is higher because of the different truck. Being a drop through, I am planning to add some risers on the top of the board at the back only, as in a drop through they actually lower the height from the ground. I am also wondering whether it's worth testing the major arc with a combination of barrel/cone bushings instead of the double barrel the trucks come with. Perhaps not as they are already superturny
yes your solution is going to work pefectly, if you like the pumping it would make sense the other way around, I mean mounting the major arc under the deck and not as drop through, and the back as regular drop through without risers, higher the board easier the pump. About the bushing I will stick with barrels, it could make sense to go even harder with the bushings instead of having conic. The first prototype was barrel conic and we figured that was better double barrel.
I would need a video explaining pumping techniques on a longboard as I am not sure if my setup is not good for pumping or if I just suck...
Ya decia yo que me sonaba ese sitio es Montgat :) buen tutorial ! :D
Hey bro, secondo te il tony hawk 180 va bene sia per fare trick che per passeggiare?
Se no me ne potresti consigliare uno?
ma qualsiasi skate da trick e gli cambi le ruote per delle 58mm 78a o 56mm 78a (come questo amzn.to/2GLM7EB ) ...o se la tua priorità sono comunqe i trick resti su 58mm 100a o anche 56mm 100a larghe
Can I just tighten the back truck for casual pump?
no, it is better to just move forward or use a very long deck like 110m minimum
what is the top speed one could reach on horizontal surface by pumping with such set-up?
I wouldn't be comfy with that cut off dive, could you maybe put it on a top mount? But I'm much appreciating the input on alternative pumping trucks
sure, in a top mount more leverage will also increase the pump, that board is made for carving
@@SkateTherapy is there a pumping skate scene in Barcelona? I had my Erasmus semester there in 2017 but wasn't into pumping at that point
@@pineapple9959 Not really
I have seen a proper LDP setup around the street only once in years. But I may not know of something going on
@@SkateTherapy so sad. The coast line or the avinguda diagonal are perfect for ldp
ciao adoro i tuoi video,e tu sei molto bravo a spiegare si vede che c'è passione !
io sto iniziando da poco e avrei bisogno di un consiglio..
Sono abituato ad usare i ripstick o waveboard poiché non poggio piede a terra per spingere e non perdo equilibrio, ma vorrei acquistare uno skate che mi permetta di fare lo stesso ma su 4 ruote anziche 2...puoi consigliarmi qualcosa per iniziare?
Considerando che farei lunghi tragitti e non brevi, e per i trik lascio perdere che sono negato hahaha
grazie mille, buon giornata e continua cosi !!!
per lunghi tragitti waterborne senza ombra di dubbio li batte tutti, puoi prendere il solo adattatore da loro o il penny waterborne amzn.to/334HWeC senza dogana e spedizione che poi se vuoi in futuro puoi metterci una tavola lunga per andare piú veloce con meno fatica
@@SkateTherapy Fantastico ! grazie mille !!!
@@SkateTherapy ,
Dude it looks like you might have put the rear trucks hanger on upside down?
do you mean backwards?
Ti vorrei chiedere un altra cosa se vuoi potrrmmo parlarr da instagram ma ci terrei a chiederti cosa ne pensi del pintail della decathlon che è flessibilissimo e rialzato tipo io lo odio nn capusco proprio come ci si riesce a stare sopre
io ho la versione anteriore, non rialzata ..noioso perché gira pochissimo, ci misi l'adattatore waterborne e ora é perfetto ...ma questo tuo suppongo che quando ci sali sopra debba piegarsi e tornare piatto, ovvero il rialzamento dovrebbe ammortizzare, non lo fa?
Fruit loops bird
Doesn't the trucks cause the board to scrap the ground??
that's depend how wide is the deck, not with the one they sell ..yes with another deck I used whivh was very wide. With a standard longboard you are safe
Anyone know how much the trucks cost? They are always sold out with no prices anywhere?
around 100 euro, they should come back with a next big production
@@SkateTherapy Thank you for posting this somewhere! I do think you should leave pricing on your website, it was super frustrating trying to track the info down!
@@Namename34567 oh is not mine, I just made some videos about it
@@SkateTherapy oh! Yes sorry I had a "brain fart" as it we're hah
Secondo te cambia se mentre spingo il piede e verso o sinistra o verso destra per dove va
se non tieni il peso al centro la tavola gira mentre spingi, tutto quí
@@SkateTherapy si infatti io mentre spingo e mentre sono su ameno che nn curvo la tavola va tutta a sinistra
Perche adesso fai sempre video inglesi please fai video italiani
quando sono inglese sono quasi sempre la versione di uno precente in italiano, questo lo trovi quí: ua-cam.com/video/b7UWV_5SUXw/v-deo.html
@@SkateTherapy a ok grazie mille della risposta comunque alla fine ho deciso di prendermi il longboard fish classic surf della decathlon
@@dregoner_1629 la tavola é molto figa, spero peró che i truck siano piú sciolti della versione precedente
@@SkateTherapy lo spero tanto anche io
everythings good but his pumping skill