I am not sure what you mean by remote. Are you referring to the Transmitter switch set to "Both"? Are you referring to using the triggers to remotely fire a camera vs strobe? If that is the case, then this link to the manual should help. There is a section for camera remote control. wp2.pocketwizard.com/wp-content/uploads/2020/03/424424Manual.pdf I would think you would connect the Receiver to the Camera and the ports on the Receiver are "Camera/Flash" and the second port is "Flash". I say this because the manual link above covers a PocketWizard Plus II Transceiver - which has the same ports as the Receiver "Camera/Flash" and the second port is "Flash".
@@firstklassflysports3732 I would review the link I sent you. I have not tried to fire a camera with a trigger, however, I think the manual will point you in the correct direction. I also believe the ports are the same (the 3.5mm jacks) on the PlusII (which is the manual linked) and the Receiver.
Thanks a bunch
Can I use both as a remote
I am not sure what you mean by remote. Are you referring to the Transmitter switch set to "Both"? Are you referring to using the triggers to remotely fire a camera vs strobe? If that is the case, then this link to the manual should help. There is a section for camera remote control.
wp2.pocketwizard.com/wp-content/uploads/2020/03/424424Manual.pdf
I would think you would connect the Receiver to the Camera and the ports on the Receiver are "Camera/Flash" and the second port is "Flash". I say this because the manual link above covers a PocketWizard Plus II Transceiver - which has the same ports as the Receiver "Camera/Flash" and the second port is "Flash".
Two cameras firing at the same time
@@firstklassflysports3732 I would review the link I sent you. I have not tried to fire a camera with a trigger, however, I think the manual will point you in the correct direction. I also believe the ports are the same (the 3.5mm jacks) on the PlusII (which is the manual linked) and the Receiver.