I came across this video after buying a used treadmill on fb marketplace. It's only three years old and was having problems with almost all the buttons not working (seller said it worked mint) becuse of this video I was able to fix my problems. I'm so thankful. Thought I bought a lemon. Now I walked away with a steal!! Thank you soo much!! Hope more people see this and try it out.
Thank you for this video. I just fixed my treadmill in less than 10 minutes. I thought I was going to have to buy a new one but I don't thanks to you!!!
Thank you for your informative video. I was lucky to solve the problem of my Keys Fitness 6600T, sharing in case it will help others. Treadmill powers ON, I could successfully set the program, the magnet key works fine. Here are the 2 issue symptoms: the incline was not functioning and when I hit Start, the treadmill shuts OFF. Did not find anything obvious. Pushed all wires and connectors in place on the control board, this did not help. I opened the console, and after pushing all connectors in place on the console circuit board, then the treadmill started to work and my problem was solved. All the best.
You my friend are a HERO! Thank you for taking time to post this.. I had to clean off the ribbon as just adjusting it did not do the trick but you saved the day.. 👍
I hope you see this! I’ve been looking everywhere for videos on this exact same treadmill. I have one and about two years ago I moved it into a different room and it’s never been the same since. I can’t seem to get the belt straightened no matter what I do. My husband has been messing with it for months and we just can’t figure out what’s wrong. One main problem we are having is that it pulls to the top left corner when we are not on it. No matter how many times we try to adjust the rear bolts, we can’t get it centered. Once we start to walk on it it shifts toward the right and then suddenly skips! So we tightened it even farther and it didn’t help. I’ve watched so many videos and I don’t know what else to do. I know I’m coming on strong but is there ANY way I could email you some pictures of mine? If I could see how tight your rear bolts are maybe that would help. How tight is your drive belt while the walking belt is tight? I’m desperate. I didn’t realize how desperate until this COVID19 virus! I need it working for my mental health and if there is anything I can do to get your help I will! Thanks for your time!
FWIW I though this idea was BS . since the ribbon is connected why reseat it ... I FU****n works ! I have a proform bought used ... use it not hard -= semi regular ...more than most people .. went yesterday to run .... screen is blank and hit a speed button .. a big 10 and on the bottom E 940 - looked around for codes on the net ... ZERO help .. I saw this vid and some other sites on lame and so so suggestions .... on a whim I tried this method on this UA-cam .. there are 2 ribbons on my units console - unhooked and reseated both and the unit came back to full function when I powered it up .. THANKS .. I really don't see how - unless the connections get dirty that this works .
@@GammaDopplerr I looked on the net .. pulle the cover on the motor and circuit boads ... checked the speed control magnet and sensor .. the sensor is good ... unplugged sensor wire from board and reconected it .. code went away .. would turn on run for about 15 sec then shut off with code .. unplug no code looked on net ... said belt may be draging to heavy load on motor ... seemed to turn ok but ??? got out can of silicone - spraded the shit out of the deck and run it adjusted belt .. ran on it for about an 1/8 mile and it did not bog down or shut down ... so I guess to much friction on the belt and tripped the motor .... working again .. for the next 15 min LOL
Awesome video! Something must have loosened during several moves or dusty while sitting over 4 years in storage. This fixed mine and all the buttons are working better than before! Thank you!
I came across this video after buying a used treadmill on fb marketplace. It's only three years old and was having problems with almost all the buttons not working (seller said it worked mint) becuse of this video I was able to fix my problems. I'm so thankful. Thought I bought a lemon. Now I walked away with a steal!! Thank you soo much!! Hope more people see this and try it out.
Thank you for this video. I just fixed my treadmill in less than 10 minutes. I thought I was going to have to buy a new one but I don't thanks to you!!!
Thanks for the tip saved me $1,600 for a new treadmill.
Thanks alot!!! Had my treadmill not working for a year finally fixed it thanks to your video.
you are welcome
I look 10 videos follow it nothing works but what you show me did it thanks
Thank you for your informative video. I was lucky to solve the problem of my Keys Fitness 6600T, sharing in case it will help others. Treadmill powers ON, I could successfully set the program, the magnet key works fine. Here are the 2 issue symptoms: the incline was not functioning and when I hit Start, the treadmill shuts OFF. Did not find anything obvious. Pushed all wires and connectors in place on the control board, this did not help. I opened the console, and after pushing all connectors in place on the console circuit board, then the treadmill started to work and my problem was solved. All the best.
Damn-!!!!!! Fixed!!! Your a wizard !
Thank you so much!!!!!!
You my friend are a HERO! Thank you for taking time to post this.. I had to clean off the ribbon as just adjusting it did not do the trick but you saved the day.. 👍
you are much welcome
Very grateful for this video. Thank you so much for this super easy fix!
Fixed my treadmill also in 5 minutes...THANKS SO MUCH!
you are welcome!
oh my god, finally I found this to fix mine, you saved me a lot money, thank you!
Thank you so much ! Works now!!
Thank you for this!! Finally fixed my treadmill
Thanks lot sir.
You are AWESOME!!! Thanks so much!
you are welcome! stay safe my friend
Thanks brother ❤️
I hope you see this! I’ve been looking everywhere for videos on this exact same treadmill. I have one and about two years ago I moved it into a different room and it’s never been the same since. I can’t seem to get the belt straightened no matter what I do. My husband has been messing with it for months and we just can’t figure out what’s wrong. One main problem we are having is that it pulls to the top left corner when we are not on it. No matter how many times we try to adjust the rear bolts, we can’t get it centered. Once we start to walk on it it shifts toward the right and then suddenly skips! So we tightened it even farther and it didn’t help. I’ve watched so many videos and I don’t know what else to do. I know I’m coming on strong but is there ANY way I could email you some pictures of mine? If I could see how tight your rear bolts are maybe that would help. How tight is your drive belt while the walking belt is tight? I’m desperate. I didn’t realize how desperate until this COVID19 virus! I need it working for my mental health and if there is anything I can do to get your help I will! Thanks for your time!
amazing...
Thanks!! It worked 🎉
You're welcome!
I can’t seem to pop open the white tab thing to get to the green ribbon? Any recommendation?
Just press and pull, there is a locking mechanism
It's work for me by remove and plug it back.
I sort of have the same problem but mine shows that the console is not turning on
FWIW I though this idea was BS . since the ribbon is connected why reseat it ... I FU****n works !
I have a proform bought used ... use it not hard -= semi regular ...more than most people .. went yesterday to run .... screen is blank and hit a speed button .. a big 10 and on the bottom E 940 - looked around for codes on the net ... ZERO help .. I saw this vid and some other sites on lame and so so suggestions .... on a whim I tried this method on this UA-cam .. there are 2 ribbons on my units console - unhooked and reseated both and the unit came back to full function when I powered it up .. THANKS .. I really don't see how - unless the connections get dirty that this works .
Lmao, i have to do this maybe once a month, it's so stupid
well it did and didn't work .. yeah this cleared it then I went to run on it ... about 10 steps it shut down and gave me that funky code again ....
I didn't have any codes, I guess mine was only connection issues
@@GammaDopplerr I looked on the net .. pulle the cover on the motor and circuit boads ... checked the speed control magnet and sensor .. the sensor is good ... unplugged sensor wire from board and reconected it .. code went away .. would turn on run for about 15 sec then shut off with code .. unplug no code looked on net ... said belt may be draging to heavy load on motor ... seemed to turn ok but ??? got out can of silicone - spraded the shit out of the deck and run it adjusted belt .. ran on it for about an 1/8 mile and it did not bog down or shut down ... so I guess to much friction on the belt and tripped the motor .... working again .. for the next 15 min LOL
wow it actually worked thanks a lot
Thank Youu!!
10 min fix. Nothing else works as well and quickly. Thanks a ton.
Easy fix that worked perfectly. Was down to only one button that still worked and now the entire panel is working. Thank you!
you are welcome
Thank you, thank you, thank you. I was about to trash mine. Such and easy fix. Much appreciated!!!
you are welcome!
Thank you!! This worked.
thanks for this video!
Awesome video! Something must have loosened during several moves or dusty while sitting over 4 years in storage. This fixed mine and all the buttons are working better than before! Thank you!
you are welcome
Does this reset the console. ????
it does
I fixed my treadmill just 5 minutes thank you buddy
you are welcome! stay safe my friend
that helped!