HOT IN SUMMER BUT ELECTRICITY PROVIDER UNPREDICTABLE? WORRY NO MORE.. HAHA COMMERCIAL ... 220V AC CONVERTED TO 12 DC WITH SAME AIR FLOW BUT MORE EFFICIENT AND WITH SPEED CONTROL
Sir sana ma Notice kasi pwede na yan gamitin wind turbine lagyan ng rectifier para ung AC na lalabas sa Fan maging DC, then lagyan na lng ng Charge control at para maka charge Lead acid Battery at LifePo4, ask q lng sana pag inikot nyo po ung fan pa check ng Output Volts Amperes kung ilan? Balak q kasi gawin wind turbine yang ganyang Fan sir kaso wala pa q time...
Nako sir hindi kona po chineck kasi kung ganitong motor gagamitin inang una yung mahina lng yung magnet, then pasok ng tubig yung loob mangangawalang ang stator. Then yung frame quality sir di nya kaya matagal na initan or unalan madaling magagato pagka plastic nya Pero I think sa config ko kaya ang 5-10w sa magandang hangin masyado pading maliit para sa effort sir 😅
hellow sir sorry sorang bc wala napong time gumawa ng mga video for now but in my opinion mahirap nang napatan ang efficiency ng 220v clip fan sobrang tipid na nila i think kung tipid din lng eh stick napo tayu sa 220v clip fan pero kung gagamitan nyu sila ng battery then convert nyu pa sa 220v ac yung batt before sa clip fan much bettery mga 12v clip fan na kayu para direct na at mag matipid kesa madameng heat waste sa convertion portability at oang emergency mas panalo din ang 12v clip fan
Optional soldeeing iron .6mm wire copper wire (wind as long as it fit the booben Hbrige driver Arduino Some wire and a 12v power supply My setup consumes 6watts maximun efficient napo can run by a 12v batteries overnight
Pwede naman sir simple switching circuit with adjustable duty cycle pwede mas matipid lng arduino kasi pwede I adjust off time every pulse para mas efficient
If you watch the video you'll see how ill make a controlled pwm signal and an full h-briged system to oscillate dc supply to make alternating current which my motor need.
@@dhansantv395 even AC uses arduino board. All you did is "Change the Coil" but never converted it to DC that's why you need a DC to AC. Yes, you're source is DC. But still, the fan still needs to use AC to run. That's why you need to convert DC to AC and connect it to the fan. Imbes na nagpakahirap ka na tanggalin at baklasin yung fan, bumili ka nLang sana ng Battery at Inverter tapos isinaksak mo yung fan.
@@FirstLast-jf9on do you know how much I spent to that coil rewind? Buying a reliable converter alone it too much expense for such a small project converting DC to low voltage AC is such an easy task that's why I'll go that way. And I also highlighted that with that stock motor using 220v is to slow and 60hz creates a huming sound which hard to bare on a quiet day's. With that alone your opinion is out off the scope of my video. Next time try to understand the video objective. Thanks
Just to add something did you know that AC stands for alternating current And did you know that when I change the polarities of a DC continuously in a certain frequency that means I'm making THAT DC TO AC? So where were you on that part of the video? Before you said I didn't convert DC to AC?
Pwede ba mas makapal na coil ang gamitin idle?
Anu size ng magnetic wire pinalit mo sir, 0.6mm?
Sir sana ma Notice kasi pwede na yan gamitin wind turbine lagyan ng rectifier para ung AC na lalabas sa Fan maging DC, then lagyan na lng ng Charge control at para maka charge Lead acid Battery at LifePo4, ask q lng sana pag inikot nyo po ung fan pa check ng Output Volts Amperes kung ilan? Balak q kasi gawin wind turbine yang ganyang Fan sir kaso wala pa q time...
Nako sir hindi kona po chineck kasi kung ganitong motor gagamitin inang una yung mahina lng yung magnet, then pasok ng tubig yung loob mangangawalang ang stator. Then yung frame quality sir di nya kaya matagal na initan or unalan madaling magagato pagka plastic nya
Pero I think sa config ko kaya ang 5-10w sa magandang hangin masyado pading maliit para sa effort sir 😅
@@dhansantv395 salamat sir sa reply 🙏🙏
Galing ng kua ko
Hi sir... Ano napong update Neto?, okie lang ba deritso na salsa sa 12volts battery?
hindi po need po ma converte to ac ang dc supply
Ask lang sir... Pano kung walang adriuno.. gagana ba Yan kahit h bgride module lang?
Hi sir gusto ko sana malaman kung ilan ang kain ng kuryente 12v vs 220v na clip fan sana makagawa kayo ng video
hellow sir sorry sorang bc wala napong time gumawa ng mga video for now
but in my opinion mahirap nang napatan ang efficiency ng 220v clip fan sobrang tipid na nila i think kung tipid din lng eh stick napo tayu sa 220v clip fan pero kung gagamitan nyu sila ng battery then convert nyu pa sa 220v ac yung batt before sa clip fan much bettery mga 12v clip fan na kayu para direct na at mag matipid kesa madameng heat waste sa convertion portability at oang emergency mas panalo din ang 12v clip fan
Ngayon ko lang nabasa btw salamat sa pag reply gawa pa kayo ng mga ganitong klasing video full support
Good
Boss ano po ba size ng original magnetic wire boss?
Boss bka pwede convert mo nlng sa 3 phase then esc ang gagamitin.
Two poles lng po ang iron core nya hindi po applicable ang 3phase config. Boss
😱
can you send me esy installation vedio
Installation is a boring one. If you need it for proof I don't need to prove any
Ano ang mga kailang gamit
Optional soldeeing iron
.6mm wire copper wire (wind as long as it fit the booben
Hbrige driver
Arduino
Some wire and a 12v power supply
My setup consumes 6watts maximun efficient napo can run by a 12v batteries overnight
Hi so
we heve not this conacter ples I heve this pen but 220 v there is no lhit in my veleg so we heve Soler
Sir I can't understand
Pwede ba kahit wala ng arduino
Pwede naman sir simple switching circuit with adjustable duty cycle pwede mas matipid lng arduino kasi pwede I adjust off time every pulse para mas efficient
Tutorial naman pappzz. Para sa mga begginer
@@aramixproduction4829 next time sir ill try to make it simplier
direct 12 better crant make a vedio
This type of motor is not capable of running on dc. Maybe swapping motor
Sui
ngeh, di ma'connect ang DC directly at kailangan gawing AC??
Eh d hindi mo na'convert to DC yung fan kasi AC parin needed na power.
If you watch the video you'll see how ill make a controlled pwm signal and an full h-briged system to oscillate dc supply to make alternating current which my motor need.
Ever wonder why there's an arduino board on thumbnails? Hehe
@@dhansantv395
even AC uses arduino board.
All you did is "Change the Coil" but never converted it to DC that's why you need a DC to AC.
Yes, you're source is DC. But still, the fan still needs to use AC to run. That's why you need to convert DC to AC and connect it to the fan.
Imbes na nagpakahirap ka na tanggalin at baklasin yung fan, bumili ka nLang sana ng Battery at Inverter tapos isinaksak mo yung fan.
@@FirstLast-jf9on do you know how much I spent to that coil rewind? Buying a reliable converter alone it too much expense for such a small project converting DC to low voltage AC is such an easy task that's why I'll go that way.
And I also highlighted that with that stock motor using 220v is to slow and 60hz creates a huming sound which hard to bare on a quiet day's. With that alone your opinion is out off the scope of my video. Next time try to understand the video objective. Thanks
Just to add something did you know that AC stands for alternating current
And did you know that when I change the polarities of a DC continuously in a certain frequency that means I'm making THAT DC TO AC? So where were you on that part of the video? Before you said I didn't convert DC to AC?
Gunggong
🤦🤦🤦🤦
Ibalik mo ang mga cover kasi pangit kung wala
Less weight po at nag aaccumulate din po dun ang dust maam
my ginawa.din akong ganyan kaso.umit agad my kulang pala