Hello, first of all, thank you for sending good code for us to study and use. And after testing your code, the message "Angle :" was not found and displayed on the LCD screen. Help detect errors.
Hello, Very informative video ! I would like to set angle on the LCD and move the servo by pressing a button. Angle would be variable as per requirement between 0 to 180. Thanks
Can you show how to make a ultrasonic sensor alarm please. Also can you show how to add 2 buttons to increase and decrease the distance for the buzzer to be activated. Thx
Hello! Thanks for your video! It has been super helpful for my project. One question; if you compare the movement of the servo connected to the LCD versus the movement of the 2 servos in the clip at the end of your video (without the LCD), the servo connected with the LCD looks a bit jumpy or pulsing to get to the set position. I have this same issue when trying to add an LCD into my project but I need to maintain the smooth motion of the servo when LCD is not attached. Any suggestions to maintain smooth motion when adding a LCD into the servo project?
Hi, Please see this video ua-cam.com/video/_uz7YcOzvjU/v-deo.html to learn how to use to servo and two pot. which you can learn to use it for as many as you like. the LCD should be simple to learn after than. Good luck. Always search my channel. you will be surprise. I just started publishing my $200 Udemy course for free on UA-cam Here is $200 Arduino course for free Arduino Step by Step Course (over 100 lectures) Starts here robojax.com/L/?id=338
Hi Ahmad, your channel is one of the best on You tube! Quick question: I cannot find how to create the playlist like chapters on the side of the video, Can you provide a link where this is taught? Thanks a lot!!!!
Hello and thank you. just see the description of the video you will see time for each chapter of the video is mentioned: just mention the times starting with 00:00 and it will show chapters. Very simple.
Hi, I am not able to upload the I2cScanner code, it's showing that it is having error in compiling with board Arduino Uno. Can you please help me with this
hi there, thanks a lotfor sharing this nice project. I just wanna say that when I checked the code , it is pointing on ( lcd.begin(); ) and says that ( no matching function for call to 'LiquidCrystal_I2C::begin()') what is the problem ?
Hi Yes it is because you must have skipped the cheep and did not see when I showed how to install the library for the lcd. Never skip my videos if you want your projects to work. All videos and projects work without any issue
Hello, I tried to use two SPI modules "RFID-522" and "MicroSD Card Adapter" on the "Arduino" at the same time, but they didn't work properly, so I used two sets of "RFID- RFID-" on the same "Arduino" 522" according to other articles. Still unable to execute, would you like to ask if the teacher knows the reason?
Hello, I'm using your code but I get the following error message at the line "lcd.begin()": "no matching function for call to 'LiquidCrystal_I2C::begin()". It looks like the library is not working correctly. Can you check the code again please?
360 or continuous is not a real servo. it is just for fun. if you need full rotation then get stepper motor or use DC motor with encoder. here are my videos on continuous servo ua-cam.com/users/robojaxTVsearch?query=360
hello how are you I need your help. I am watching with your appreciation of the videos. I want to light the combi boiler according to the outside air sensor. Example When the temperature is -5 outside, the boiler should burn at 40 degrees and when it is -10 degrees, it should burn at 50 degrees. I need the code for this project. I would appreciate your help. Thank you
Hello, you need a full project. Either learn arduino so you can do it. Here my course which teaches you everything for freeArduino Step by Step Course (over 100 video lectures) Starts here robojax.com/L/?id=338 or pay someone to write to you may be from here www.upwork.com/
Sir I am a mechatronic student and i have to connect a potentiometer to the master module and a lcd to the slave module. When we vary the potentiometer the value should be displayed on the lcd. Using a bluetooth module hc-05. How should i proceed. Kindly guide me. Thank you.
@@robojaxI have solved them one by one but cant assemble the code altogether. Can you send me the code and circuit diagram? I will make it and underatand myself.
LOL. which code? it is 4 project. I have videos. you search, find them, watch the video, get the code and then go to the next one. may be you watch 5 to 10 videos until you find the right code. once you learned, then you combine them. good luck
hello, this video is about servo motor. but what will the closed loop do? unless you know the rate of rotation or RPM, closed loop will not work. so you use pot. to change the speed and monitor the rpm and if it deviates from certain value, the feedback compensates and corrects the RPM. you will use encoder on the motor to read the RPM.
this is Arduino. except you have an interface that makes the code easy. it seems interesting. But my videos mostly watched by school and hobbyist who want to learn. whey want to know how code work. I will look at it. Thanks.
hi sir i am irfan from pakistan please you can help to me about 1mini circuit i want make the circuit of sensor proximity analog distance (xm30-3015pmu) it has a function we have a sensor distance 15mm from metal it give dc10v ...14mm=9v....13mm=8v...12mm=7v depending on the metal 0-10v vari with distance
Hi, you posted comment under wrong video. I have videos related to proximity sensor here ua-cam.com/users/RobojaxTVsearch?query=proximity and if you watch, you will learn. do not skip if you want to learn.
The multilingual subtitles are awesome!
I am glad you like it.
Thanks a trillion Ahmad for your dedication and commitment. I don't just learn arduino from you but kindness too. Godbless you.
Upi are we;cp,e/ that is nice of you. Let's just try be good.
This Is Video Tutorial Very Very VeryGood....... You Are My teacher... s
تشکر از استاد شمشیری . موفق باشید .
خواهش میکنم. شما سلامت باشید.
سلام علیکم. مجرا (کانال) فارسی علم و فن را راه اندازی کردم: لطفا به دوستان تان خبردهید و حمایتم کنید.
www.youtube.com/@ilmofan
Hello, first of all, thank you for sending good code for us to study and use. And after testing your code, the message "Angle :" was not found and displayed on the LCD screen. Help detect errors.
learning from a master, thank you, stay safe
Thanks, will do!
Hello, Very informative video ! I would like to set angle on the LCD and move the servo by pressing a button. Angle would be variable as per requirement between 0 to 180. Thanks
Ahmad Shamshiri you are the man. Can i hire you for a couple small projects? If so please tell me how.
👊
Hi David, I don't know how to handle project with someone far from me. Also I am very busy. Thanks.
Can you show how to make a ultrasonic sensor alarm please. Also can you show how to add 2 buttons to increase and decrease the distance for the buzzer to be activated.
Thx
I subscribed to you now, since ur videos help me sooo much
Than you. Interesting project. I've just put it on my "to do list". Once I am done with current projects in hand, God willing I will make this video.
@@robojax Thanks a lot!
Great work Sir. A question! can we run like larger Ac servo like 2kw with this ?
This is DC servo. Send me the AC servo model or product page I will look at it to see if it works.
Very helpful video
Glad you think so!
Hello! Thanks for your video! It has been super helpful for my project. One question; if you compare the movement of the servo connected to the LCD versus the movement of the 2 servos in the clip at the end of your video (without the LCD), the servo connected with the LCD looks a bit jumpy or pulsing to get to the set position. I have this same issue when trying to add an LCD into my project but I need to maintain the smooth motion of the servo when LCD is not attached. Any suggestions to maintain smooth motion when adding a LCD into the servo project?
Watching and learning very informative videos Thank you^^
you are very welcome.
@@robojax wow!
Another great video, thank you!
My pleasure!
Wonderfully Explained thanks 👍🏿
Glad you liked it
Hi, I am using 2 servo with 2 potentiometers. May I know which part of the coding that needs to be changed so I can display both angles on the lcd.
Hi, Please see this video ua-cam.com/video/_uz7YcOzvjU/v-deo.html to learn how to use to servo and two pot. which you can learn to use it for as many as you like. the LCD should be simple to learn after than. Good luck. Always search my channel. you will be surprise. I just started publishing my $200 Udemy course for free on UA-cam Here is $200 Arduino course for free Arduino Step by Step Course (over 100 lectures) Starts here robojax.com/L/?id=338
Hi Ahmad, your channel is one of the best on You tube! Quick question:
I cannot find how to create the playlist like chapters on the side of the video, Can you provide a link where this is taught?
Thanks a lot!!!!
Hello and thank you. just see the description of the video you will see time for each chapter of the video is mentioned: just mention the times starting with 00:00 and it will show chapters. Very simple.
Hi, I am not able to upload the I2cScanner code, it's showing that it is having error in compiling with board Arduino Uno. Can you please help me with this
Hi, perhaps it is broken when you copied it. try it from Files->Examples->Wire->I2c Cannaer
Sir please upload a video of making led display PWM generator with 8channel output sir please
Never hear of it
خیلی ممنون از ویدیو های خوبتون
من و پسرم خیلی کارهای شما را دوست داریم
خواهش میکنم. خوشحالم که شما و پسرتان از کارهایم خوشتان میاید. برای شما و پسر تان آرزوی صحت و عافیت داریم. در امان الله باشید.
سلام علیکم. مجرا (کانال) فارسی علم و فن را راه اندازی کردم: لطفا به دوستان تان خبردهید و حمایتم کنید.
www.youtube.com/@ilmofan
hi there, thanks a lotfor sharing this nice project. I just wanna say that when I checked the code , it is pointing on ( lcd.begin();
) and says that (
no matching function for call to 'LiquidCrystal_I2C::begin()') what is the problem ?
Hi
Yes it is because you must have skipped the cheep and did not see when I showed how to install the library for the lcd. Never skip my videos if you want your projects to work. All videos and projects work without any issue
Hello, I tried to use two SPI modules "RFID-522" and "MicroSD Card Adapter" on the "Arduino" at the same time, but they didn't work properly, so I used two sets of "RFID- RFID-" on the same "Arduino" 522" according to other articles. Still unable to execute, would you like to ask if the teacher knows the reason?
Hello, I have not worked on RFID-522 yet. it needs full video to be explained. God willing, I will make video in the future on that.
Woooh, good videos, keep it up!!
How can I get those components for my practice
From Uganda
The link is in description, get from AliExpress
Excellent video 👌
Thanks for the visit
Hello,
I'm using your code but I get the following error message at the line "lcd.begin()":
"no matching function for call to 'LiquidCrystal_I2C::begin()".
It looks like the library is not working correctly.
Can you check the code again please?
you made me watch the video. I have explained it. you've skipped the video. Please watch.
@@robojax
I did and I changed "lcd.begin()" for "lcd.init()" and it is working correctly now
Big respect from £ngland ,💯⭐
thank you @Ras Davis. Greetings from Canada. stay safe.
excelente video gracias
You are welcome. Here is $200 Arduino course for free Arduino Step by Step Course (over 100 lectures) Starts here robojax.com/L/?id=338
Sir what changes I need to perform if I have a requirement of complete 360 degree rotation.
360 or continuous is not a real servo. it is just for fun. if you need full rotation then get stepper motor or use DC motor with encoder. here are my videos on continuous servo ua-cam.com/users/robojaxTVsearch?query=360
hello how are you I need your help. I am watching with your appreciation of the videos. I want to light the combi boiler according to the outside air sensor. Example When the temperature is -5 outside, the boiler should burn at 40 degrees and when it is -10 degrees, it should burn at 50 degrees. I need the code for this project. I would appreciate your help. Thank you
Hello, you need a full project. Either learn arduino so you can do it. Here my course which teaches you everything for freeArduino Step by Step Course (over 100 video lectures) Starts here robojax.com/L/?id=338 or pay someone to write to you may be from here www.upwork.com/
Sir please upload controlling 16servos with LED display sir
What LED display?
Sir
I am a mechatronic student and i have to connect a potentiometer to the master module and a lcd to the slave module. When we vary the potentiometer the value should be displayed on the lcd. Using a bluetooth module hc-05.
How should i proceed.
Kindly guide me.
Thank you.
wow. that is 3 or 4 project in 1. can't be explained with text. it need very long video and may be 10 to 20 hours of work if never used.
@@robojax Now, what to do sir?
Can't be done?
brake it down into 4 projects. solve them one by one.
@@robojaxI have solved them one by one but cant assemble the code altogether.
Can you send me the code and circuit diagram?
I will make it and underatand myself.
LOL. which code? it is 4 project. I have videos. you search, find them, watch the video, get the code and then go to the next one. may be you watch 5 to 10 videos until you find the right code. once you learned, then you combine them. good luck
Thanks teacher 👍👍👍
You are welcome
Robojax looking at Robojax videos....I thought the Matrix was Broken...
LOL. I have no idea what this is. Matrix as linear Algebra or matrix movie.
@@robojax The Movie..lol
Can you do this code in cube ide
Never heard of it . Try it.
@@robojax it’s a similar to arduino but different . Can you help me
Can I get your email address or I can give you mine so we can talk about it
Thank you❤
Please make arduino based setting menu system please consider my request
you are welcome. I already have it on my list and have worked a little. God willing, I will make video when time permits.
@@robojax Thanks sir if possible please share the link Again thanks for your reply
Hello sir close loop potentiometer DC motor control please 🙏🙏
hello, this video is about servo motor. but what will the closed loop do? unless you know the rate of rotation or RPM, closed loop will not work. so you use pot. to change the speed and monitor the rpm and if it deviates from certain value, the feedback compensates and corrects the RPM. you will use encoder on the motor to read the RPM.
@@robojax thank you sir🙂
you are very welcome. Stay safe.
Please you show us how to XOD.
Never heard XOD before.
@@robojax
Forgive me, I'm surprised you never hear that. Let me show you.
xod.io/
this is Arduino. except you have an interface that makes the code easy. it seems interesting. But my videos mostly watched by school and hobbyist who want to learn. whey want to know how code work. I will look at it. Thanks.
@@robojax
I watch at XOD Tutorials by UA-cam, suddenly understand how to that. It's fascinating.
there are tones of online tools for Arduino indeed.
Esp32 board how to control 2 servo and 2 potanmeter please code send me
See my comment in reply to your other comment.
hi
sir i am irfan from pakistan
please you can help to me about 1mini circuit
i want make the circuit of sensor proximity analog distance (xm30-3015pmu) it has a function
we have a sensor distance 15mm from metal it give dc10v ...14mm=9v....13mm=8v...12mm=7v depending on the metal 0-10v vari with distance
Hi, you posted comment under wrong video. I have videos related to proximity sensor here ua-cam.com/users/RobojaxTVsearch?query=proximity and if you watch, you will learn. do not skip if you want to learn.
sir where is the zip file? thank you
In description under the Cicero or go directly to Robojax.com
👏👏👏👏