Bilal you legend! You just saved our printer from a deathly exit. The printer says ‘thank you Bilal’ and my wife says “you bloody ripper!” Love us Aussies.
Thank you, Bilal, your video helped me solve the problem in 5 minutes. 😊 Someone has loaded paper incorrectly in my case and it wasn't noticeable from outside. Rearranging the paper and restarting the printer is all it took to stop the disco lights, luckily. The white color version of the printer looks great. 😍
Thanks it worked. I pulled it up too much and the ribbons came off. Lucky I managed to put it back in. Found a small plastic ball inside. Now to figure the solid red lights
I think I have this issue, but i cannot find anything that is stuck. I tried moving the print head but i keeps getting stuck to the left under initialization. Any ideas on how to fix this. My printer is ET-2810 but looks very similar to yours. How do i open the lid fully on my printer?
If you haven't managed to get the lip up it's easy where the lip lift up n clips in just push the lid down but with you're finger punch the little click back n then it should lift up all the way
Mr Bilal..i hope u read this.. i got lights blinking problem. Same like video but my printer also cannot detected via usb. I have L3256 & cannot use your resetter program bcoz usb also not detected. Tried everything. Do u think board problem?
Hello. I have a problem with the ET 2814 printer. At the same time, 4 lights flash, namely the power button, the lower wifi light and both ink lights. When I plug the printer directly into the socket, the printer turns on automatically, the power button does not work because when I press it, the printer will not turn off. I am asking for help.
Hi, same problem here on an Epson L4150. This is the second time in 5mths. I had a guy fix it in December, and it went and did the same thing two weeks ago. I am looking to fix it myself. Will the same steps apply?
Hi I have an Epson eco 2860 only a day old plugged it in did the set up connected it to my phone and than all lights will not go off won’t do anything at all when I plug it in all the lights come on straight away flashing red the paper ink WiFi and the power button done got the laptop out and nothing was detected for software update it is annoying me 24 hours of trying everything and it’s just just having none of it £200 down the pan it looks like as can’t get hold of Epson so I take it is broke before I’ve even used it
Selamün aleyküm usta. Bende hala ışıklar sönmüyor neden olabilir kagit yeri temiz mürekkep yerinde olan beyaz filtreyide yeniledim ama hata devam ediyor?
Hello I have a problem that suddenly occurred in my Epson 2810 printer. When I press the power button, it works normally, but after about a minute it turns off automatically, and I must turn it on again from the power button. What is the problem, please? What is the solution ? I look forward to your reply and thanks
My ET-2810 printer the ink cartridge is flashing orange & the power button is flashing green. The WiFi won’t connect whatsoever I only moved it from my bedroom to my living room!!!
My epson printers all light blinking after refilling the ink .. I attempted head cleaning after ink refill and cancel that before completing.. Whats the problem can uhh plllls tell me... Its an emergencyyyyyyyyyy 👀
There is nothing stuck but it’s all blinking. When I turn on there is only WiFi yellow like in the end of the video, but after a minute it’s all blinking. I’m frustrated. Please how can I initialize my printer
Hello brother can you answer me how to hard reset dahua hcvr4104c-s3 white color small device i don't know how to skip the admin password i don't know the password and i don't linked my account to the device and the device is not have a hard reset button ????
Thank you very much my friend. Lucky for me it turned out to be a paper jam and I only wanted to use the scanner. Started fine after I took the old paper out.
Jesus Christ… One guy says when all the lights are blinking on the ET 2400. It’s a firmware update issue… Then you go to idiots like this that say no you gotta tear apart the whole damn thing and unscrew it… Jesus Christ …….can two people on here get on the same sheet of music with the same issue, please🙄🙄🙄🙄🙄🙄🙄 this just truly shows Nobody knows what the hell they’re talking about.
Mathew it depends, all lights blinking is a fatal error that may occur due to many reasons. You should not panic or see youtube videos. You have to take your printer to official service center. These youtube videos are for technicians not for end users. Stay happy
I am facing some problems with my Epson L3150 printer. What appears to me is that the scanner roller is moving smoothly from left to right but not returing from the right side, and then all the lights are starting to blink. I have cleaned the inside and checked that there are no obstacles inside the printer. I am attaching a video of the problem at the link: ua-cam.com/users/shortsCHlKYQZiH54. Please guide me to fix the problem.
Sir I watched your video, it seems you have an issue with scnner. I suggest you to find a spare scanner and check. All lights blinking issue can be from damage scanner, and also it can be from the round shape transparent strip as if its not fixed well on its holder. Third it can be due to ink carriage as well if something got stuck inside and as you said, you already checked there is no obstacles inside then i suggest to go through first 2 problems that i mentioned above. All the best!
Bilal you legend! You just saved our printer from a deathly exit. The printer says ‘thank you Bilal’ and my wife says “you bloody ripper!” Love us Aussies.
Glad I could Help!
Thank you, Bilal, your video helped me solve the problem in 5 minutes. 😊 Someone has loaded paper incorrectly in my case and it wasn't noticeable from outside. Rearranging the paper and restarting the printer is all it took to stop the disco lights, luckily.
The white color version of the printer looks great. 😍
Glad it helped
Thank you very much my friend. Lucky for me this is the only one in English
Is it possible to Epson l3250 ? Almost the same ... All lights blinking except the upper light beside the wifi button ??
Thank you so much, this helped me fix my printer!
Glad it helped!
Thanks it worked. I pulled it up too much and the ribbons came off. Lucky I managed to put it back in. Found a small plastic ball inside. Now to figure the solid red lights
Glad it helped
Thank you so much for guiding. I saw a small screw stocked inside. Problem solved now. 🥰
glad it helped
bilal thank you it worked!
Thank you for the video , my problem got resolved after watching
I think I have this issue, but i cannot find anything that is stuck. I tried moving the print head but i keeps getting stuck to the left under initialization. Any ideas on how to fix this. My printer is ET-2810 but looks very similar to yours. How do i open the lid fully on my printer?
If you haven't managed to get the lip up it's easy where the lip lift up n clips in just push the lid down but with you're finger punch the little click back n then it should lift up all the way
Thank you very much! Video saved me a lot of stress. Legend :)
Glad it helped!
Mr Bilal..i hope u read this.. i got lights blinking problem. Same like video but my printer also cannot detected via usb. I have L3256 & cannot use your resetter program bcoz usb also not detected. Tried everything. Do u think board problem?
Yes brother formatter board has an issue
Thank u bilal ❤
I unscrew the printer then found lizard on the roller😂😂
Anyway problem has been solved.
Glad it helped!
oldu kardeşim ,içindeki mürekkep püskürten aparatı zor oynattım biraz,sonsra ışıklar söndü.Allah razı olsun
Teşekkür ederim
It Worked. I sroll the white like Dish as shown.
Hello. I have a problem with the ET 2814 printer. At the same time, 4 lights flash, namely the power button, the lower wifi light and both ink lights. When I plug the printer directly into the socket, the printer turns on automatically, the power button does not work because when I press it, the printer will not turn off. I am asking for help.
Same here! Did you figure it out?
I literally have the same too, so hoping the OP replies!
You fixed it?
i have the same problem
No. It's problem whit software.
Hi, same problem here on an Epson L4150. This is the second time in 5mths. I had a guy fix it in December, and it went and did the same thing two weeks ago. I am looking to fix it myself. Will the same steps apply?
Hopefully
Hi I have an Epson eco 2860 only a day old plugged it in did the set up connected it to my phone and than all lights will not go off won’t do anything at all when I plug it in all the lights come on straight away flashing red the paper ink WiFi and the power button done got the laptop out and nothing was detected for software update it is annoying me 24 hours of trying everything and it’s just just having none of it £200 down the pan it looks like as can’t get hold of Epson so I take it is broke before I’ve even used it
Selamün aleyküm usta. Bende hala ışıklar sönmüyor neden olabilir kagit yeri temiz mürekkep yerinde olan beyaz filtreyide yeniledim ama hata devam ediyor?
Hello
I have a problem that suddenly occurred in my Epson 2810 printer. When I press the power button, it works normally, but after about a minute it turns off automatically, and I must turn it on again from the power button. What is the problem, please? What is the solution ?
I look forward to your reply and thanks
Check power cable
My ET-2810 printer the ink cartridge is flashing orange & the power button is flashing green. The WiFi won’t connect whatsoever I only moved it from my bedroom to my living room!!!
Didn't work for me. Thing inside goes to the left and as soon as it stops all the lights come on.
thanks
It worked! Thank you😮
Hello I think the feeder rotor gear on the right is broken. How can I buy this part?
From ali express
Power tuşu reaction vermiyor. Ne yapılması gerek?
merci jai bien reparé mon imprimante
Awesome thanks bro it saved me
Glad I could help
My epson printers all light blinking after refilling the ink ..
I attempted head cleaning after ink refill and cancel that before completing..
Whats the problem can uhh plllls tell me...
Its an emergencyyyyyyyyyy 👀
Thanks problem fix
There is nothing stuck but it’s all blinking. When I turn on there is only WiFi yellow like in the end of the video, but after a minute it’s all blinking. I’m frustrated. Please how can I initialize my printer
Like what do you mean at 2.19 how I’ll know it’s in the right spot
theres no stuck
Hello brother can you answer me how to hard reset dahua hcvr4104c-s3 white color small device i don't know how to skip the admin password i don't know the password and i don't linked my account to the device and the device is not have a hard reset button ????
I Posted already video on i think. you can check
Thank you very much my friend. Lucky for me it turned out to be a paper jam and I only wanted to use the scanner. Started fine after I took the old paper out.
Glad it helped
brother please help. There is nothing stuck - then what to do???
Check sensor
@@BilalKhalid "ink pad is at the end of service life error" ... then what - resetter?
Do they exist for mac computers?
@@BilalKhalid where is the sensor?
@@nimblejackIt's beside the fulcrum rollers!
Jesus Christ… One guy says when all the lights are blinking on the ET 2400. It’s a firmware update issue… Then you go to idiots like this that say no you gotta tear apart the whole damn thing and unscrew it… Jesus Christ …….can two people on here get on the same sheet of music with the same issue, please🙄🙄🙄🙄🙄🙄🙄 this just truly shows Nobody knows what the hell they’re talking about.
Mathew it depends, all lights blinking is a fatal error that may occur due to many reasons. You should not panic or see youtube videos. You have to take your printer to official service center. These youtube videos are for technicians not for end users. Stay happy
I am facing some problems with my Epson L3150 printer. What appears to me is that the scanner roller is moving smoothly from left to right but not returing from the right side, and then all the lights are starting to blink. I have cleaned the inside and checked that there are no obstacles inside the printer. I am attaching a video of the problem at the link: ua-cam.com/users/shortsCHlKYQZiH54. Please guide me to fix the problem.
Sir I watched your video, it seems you have an issue with scnner. I suggest you to find a spare scanner and check. All lights blinking issue can be from damage scanner, and also it can be from the round shape transparent strip as if its not fixed well on its holder. Third it can be due to ink carriage as well if something got stuck inside and as you said, you already checked there is no obstacles inside then i suggest to go through first 2 problems that i mentioned above. All the best!
@@BilalKhalid Thank you very much sir..I will follow your guideline and will give you the feedback.
eywallah kardeşim,benimde yazıcımın ışıkları yanıp sönüyor,yarın sınıfta deneyeceğim,inşallah olur
En iyi dileklerimle kardeşim
Password for your epson 3216 adjustment program zip file
Try epson
Bhai pata h ap k views kam kyo hai kyoki angregi diye pade ho 140 cr ki janta ho hindi aati h hindi bolo
Thank you sharma g,, I will make in hindi language as well.
not in my case,, brand new printer all lights flashing and NOTHING,, there is no jam or anything