Fuse Audio Labs VCE-118 Dynamic Range Enhancer

Поділитися
Вставка
  • Опубліковано 28 лип 2024
  • A new plugin from Fuse Audio Labs. Expansion, compression and "infinite" setting.
    fuseaudiolabs.de/#/pages/prod...
    00:00 Intro
    01:02 Controls
    04:02 Expansion
    05:54 Compression
    07:29 Infinite Compression
    11:03 Outro

КОМЕНТАРІ • 13

  • @HugoArgentina
    @HugoArgentina 3 місяці тому +1

    Thank you Eric!

  • @nj1255
    @nj1255 4 місяці тому +4

    I've had two of these. Noisy little things, but the compression can be quite pleasantly punchy on the right source! If you are looking to buy a DBX 117/118/119 you should know that they were primarily made to be used with hi-fi systems so they only have RCA I/O. Mine were already modded with 1/4" I/O when I bought them though.

  • @chinmeysway
    @chinmeysway 4 місяці тому +1

    that’s pretty cool. i do like flaming lips gritty compressed drums sound. kinda similar maybe.

  • @jinxradar
    @jinxradar 4 місяці тому +1

    Nice run through 👍

  • @joaoantoniovione484
    @joaoantoniovione484 3 місяці тому +1

    Did you use the expansion mode with the mix on 100% wet? It didn't sound (to me at least) that it was the case.
    The compression was pretty cool though. Exactly what I'd expect from a dbx - I have the 160A and the original 166.
    Keep up... cheers from Brazil.

    • @ObsessiveAudio
      @ObsessiveAudio  3 місяці тому +1

      Yep 100 percent wet for the expansion example. At 4:45 the mix knob is clearly at 100% wet. Just checked to make sure. Great compression sounds.

  • @chinmeysway
    @chinmeysway 4 місяці тому +1

    what does expansion do exactly ?

    • @ObsessiveAudio
      @ObsessiveAudio  4 місяці тому +1

      Expansion increases dynamic range. Loud gets even louder, quiet even quieter.

  • @eklipseRomania
    @eklipseRomania 4 місяці тому +1

    Kinda bummed they don't have an M/S version, but I suppose I can workaround that limitation.

    • @chinmeysway
      @chinmeysway 4 місяці тому

      on an aux bus w this plug-in, high pass an eq first plus have a drum bus for everything that’s sides / not to be mid / lower frequencies?

    • @mirkomarkovic3438
      @mirkomarkovic3438 4 місяці тому

      ​@@chinmeyswayjust use a m/s matrix

    • @joaoantoniovione484
      @joaoantoniovione484 3 місяці тому

      you could do a M/S matrix ITB... basically: summing left and right would give you the mid signal, whereas summing left and a polarity-reversed right channel would give you the side. To convert it from MS to LR you would have
      L= mid + side
      R= mid + (-side)
      and pan accordingly.
      on reaper you have a center cancelling plugin, as well as M/S encode/decoders. you can work around with mixing the polarity-reversed, center-cancelled signal added to the original to then isolate the mid signal...
      that's how I pretty much turned 3 tracks from a stereo buss when recording 2-track, live sessions, and so on🤓

  • @RemcoJvGrevenbroek
    @RemcoJvGrevenbroek 4 місяці тому

    it is NOT free its a trial