BASIC 2D TRANSFORMATIONS IN COMPUTER GRAPHICS

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 201

  • @sundeepsaradhi
    @sundeepsaradhi  7 років тому +56

    hello viewers
    In Translation transformation while writing the equation for y coordinate i have written a mistake and pls note the change
    y'= y+ ty ------------- correct
    y'= y+ tx -------------- wrong
    thank you

  • @stiflavibes
    @stiflavibes 6 років тому +9

    I understood quicker than with my actual lecture notes. Thank you.

  • @praveenkumar-tr9ui
    @praveenkumar-tr9ui 7 років тому +24

    sir , we need more tutorial like this in Computer graphics !
    these videos are more helpful ! Thank you :)

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +3

      hi praveen
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

    • @monikatobias7061
      @monikatobias7061 3 роки тому

      Is True say

  • @mayanktiwari5583
    @mayanktiwari5583 4 роки тому +1

    Sir u don't have any idea that how much helpful your videos are ....... 💯🙏

  • @ifargantech
    @ifargantech 5 років тому +2

    I never leave this video without appreciating and thanking you!! Thank you a lot!! You helped me!!

  • @comedyfansedit4796
    @comedyfansedit4796 2 роки тому

    sir, I clear my computer graphics because of you, thanks. subscription added.

  • @ibu433
    @ibu433 6 років тому +1

    MAN YOU'RE A SAVIOR !
    Thanks a ton !! and thanks another ton for making the video in English ^_^ !!

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi
      thanks for your interest and support towards our channel. keep on following my sessions.

  • @turabnaveed9765
    @turabnaveed9765 7 років тому +1

    massive respect sir ..... explained to perfection

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      Hi Turab Naveed thank you for your interest towards our channel and if you like my videos do subscribe to our channel

  • @sachinwalunjakar8854
    @sachinwalunjakar8854 4 роки тому

    Simple without any confusion explanation !

  • @TravellerMann
    @TravellerMann 6 років тому +2

    Easily explained with Neat & clean hand writing 😁😘
    Nice..

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi vishal
      thanks for your interest towards our channel and share my sessions with
      your friends and subscribe to our channel.Keep following our channel.

  • @Anamika-xb8xf
    @Anamika-xb8xf 6 років тому +1

    Grateful for this video. Cleared my conception.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi anamika
      thanks for watching my sessions and interest towards our channel.

  • @isharma789
    @isharma789 6 років тому

    Great.. Crystal Clear Deliver of Lectures

  • @harshant1
    @harshant1 6 років тому +22

    in clockwise direction you have mentioned theeta* in the wrong place , as it is the angle by which line has moved clockwise not the final angle that the line make after rotation although the solution is correct :)

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому +11

      hi harshant
      you are correct and nice observation. the theeta mentioned was wrong i am supposed to draw the theeta from the line till end.thanks for your correction.

  • @tatendamachikiche5535
    @tatendamachikiche5535 2 роки тому

    u explained very well thank very much but pliz increase the audio volume we need more people like u

  • @manishjain445
    @manishjain445 6 років тому +4

    Sir, I became fan of your's in Computer Graphics... Thank you! Please upload more videos such as Polygon Draw Algorithms and others

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому +2

      hi manish
      thanks for your interest towards our channel and share my sessions with
      your friends and subscribe to our channel.Keep following our channel.

  • @arunimakalakotla7899
    @arunimakalakotla7899 6 років тому +1

    Thank you sir great explanation in easy method.
    Sir we need some more tutorials in computer graphics

  • @priyanshurai5939
    @priyanshurai5939 6 років тому +1

    explained fluently with good teaching skill sir

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi priyanshu
      thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

  • @balajibabji9887
    @balajibabji9887 6 років тому

    U have got 1k likes for your video....nice explanation sir

  • @jg8742
    @jg8742 5 років тому +1

    dear sir. I think for the matrix of counter clockwise rotation it should be[ cos(theta) -sin(theta)
    sin(theta) cos(theta)]
    please let me know if I am wrong.

  • @siddharthverma4017
    @siddharthverma4017 5 років тому +1

    7:18 scaling 12:36 rotation

    • @abhinavs03
      @abhinavs03 5 років тому

      one like for my side brother for your contribution in this.haha.

  • @ezhildurga
    @ezhildurga 5 років тому

    Ur teaching method is very excellent...tq u so much sir🤗🤗

  • @DivyaGupta-je2eq
    @DivyaGupta-je2eq 7 років тому +1

    Thankyou soo much sir..you saved my subject!!!

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi divya
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @manikandanmohan5007
    @manikandanmohan5007 7 років тому +1

    tq sir...your teaching is easy to understand

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      thank you mohan for ur interest towards our channel

  • @SANGEETHACBIT
    @SANGEETHACBIT 7 років тому +2

    your videos all are amazing.....
    clear explanation.....

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +1

      thank you sangeetha for ur interest towards our channel

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi sangeetha
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @nilimeshhait7432
    @nilimeshhait7432 7 років тому

    Thank U Sir , For explaining in details . Your videos are really awesome and very helpful . Thank u once again .

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi nilimesh
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @nhlakaniphombotho5310
    @nhlakaniphombotho5310 7 років тому +1

    Excellent tutorials, thank you very much and god bless

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi Mbotho
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @MdFarhan-ge3wg
    @MdFarhan-ge3wg 5 років тому

    thank u soo much sir. u saved my life.... may God always bless you

  • @RaushanKumar-rd7we
    @RaushanKumar-rd7we 6 років тому +1

    for clockwise direction i think theta angle will be above the p' line, that is at same place as it is in anti-clk wise direction diagram.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi raushan
      for clockwise and anti clockwise rotation the only change is in angle.

  • @rimshafiayaz4025
    @rimshafiayaz4025 7 років тому +1

    if i have an original and resultant image how would i find that how many factor it is rotated,translated,sheared or scaled and along which axis??

  • @satyamdixit3676
    @satyamdixit3676 7 років тому +2

    In the clockwise rotation figure drawn, the angle rotated must be theta(i.e angle between original and rotated) and not the angle between the x-axis and the rotated line.

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi dixit
      let me check once and get back to you

  • @athisii_ekhe6167
    @athisii_ekhe6167 5 років тому

    thank you sir. You made everything simple and learner-friendly.

  • @ashdlll7892
    @ashdlll7892 7 років тому +1

    Teaching skill is great

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi ashwin thanks for your interest towards our channel
      plz make a selfie video having a feedback on our channel and send it to my whatsapp number 9885466061. i am collectnng the feedbacks from all and want to upload in our channel.

  • @maheshbhatm9998
    @maheshbhatm9998 7 років тому +1

    superb sir ..... i understood completely ... thank u sir

  • @nareshreddykallu7216
    @nareshreddykallu7216 5 років тому +2

    sir here in rotation i can find a one mistake.where rotation in clock wise direction formulas is correct but matrix formate is wrong minus is assigned by second row of first coloum but you can assign first row of second coloum

  • @haniguitar
    @haniguitar 7 років тому +1

    You saved my life sir
    Thank you so much

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi hassan
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @ashwinikrranjan
    @ashwinikrranjan 5 років тому +1

    awsm very helpful thnkuuuu sir

  • @Anytime4yo
    @Anytime4yo 7 років тому +4

    thanx alot sir ....................keep growing

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +1

      Hi Navjot _Sarwara thank you for your interest towards my sessions.

  • @madhavkumar7277
    @madhavkumar7277 7 років тому +1

    I think there is one slight mistake in clockwise rotation, that too is only in figure. As in anticlockwise rotation the hypotenuse is rotated by angle theta( new angle is not theta) . Similarly in clockwise rotation it should be rotated by angle theta (new angle shouldn't be theta ). so theta should be angle btw both hypotenuse.

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      Hi Madhav Kumar thanks for the observation i will check once and let you know.

  • @madhumitachakraborty7033
    @madhumitachakraborty7033 7 років тому +6

    please make videos on scan line polygon fill algorithm, boundary fill algorithm and flood fill algorithm

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi madhumita
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

    • @rizwanghanchi5537
      @rizwanghanchi5537 6 років тому

      yes make video for scalline

  • @vishwa5254
    @vishwa5254 6 років тому +3

    very helpful for class bunkeres like me

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi Vishwa
      thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

  • @vishwanathhosmane3834
    @vishwanathhosmane3834 4 роки тому

    Sir which camera you use to shoot videos and how you edit video if there is any mistake in video??

  • @jayeshsuryawanshi213
    @jayeshsuryawanshi213 7 років тому +1

    Nice work sir we are hoping for 3d transformations asap :)

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      HI JAYESH
      THANK YOU AND SOON I WILL UPLOAD 3D TRANSFORMATIONS

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi jayesh
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @rutujashatgar8990
    @rutujashatgar8990 4 роки тому +1

    i wanted to ask why when we rotate from P to P' r remains same, i mean why doesn't it changes?

  • @TheRainbowgary
    @TheRainbowgary 7 років тому +1

    Thanx for your videos :) .helps a lot .

  • @harshniramesh9130
    @harshniramesh9130 2 роки тому +1

    Sir, at last you have written the rotation formulas sir... But both the formulas for clockwise and anticlockwise are interchanged it seems sir.... If I am mistake I'll change sir.

  • @AkashVishwakarma-yu7kk
    @AkashVishwakarma-yu7kk 6 років тому

    Best and hardworking sir keep it up sir

  • @ritikkatoch7693
    @ritikkatoch7693 5 років тому

    is the rotation matrix is wrong for clock and anti-clockwise

  • @thebudkellyfiles
    @thebudkellyfiles 6 років тому +2

    Brilliant! Thank you.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi thank you for watching my sessions and your support towards our channel.

  • @roykumuda
    @roykumuda Рік тому

    Thanks for good explanation

  • @visakhakenguva9698
    @visakhakenguva9698 7 років тому +1

    Thanks a lot sir that was really great

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      always welcome and thanks for your support towards our channel.

  • @ananditashankar6056
    @ananditashankar6056 7 років тому +15

    sir in translation equation for y, I guess you have written the equation wrong. I think it will be y'= y+ ty not tx

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +18

      hi anandita
      you are correct i have written equation wrong and it is y'= y+ ty.
      Thanks for your observation.

    • @vforveerji
      @vforveerji 7 років тому

      I was confused about the same..
      Paused the video and got the Solution..
      Thanks

    • @lokeshtiwari9867
      @lokeshtiwari9867 7 років тому +2

      Anandita Shankar yr itna smjhdar ho na agr nai ho to engneering chhod do

  • @soumyamalhotra9902
    @soumyamalhotra9902 7 років тому +6

    Sir, in the clockwise rotation diagram, I think you have mistakenly marked the theta angle wrong. The new angle should be theta - phi and not just theta. Please correct me if I am wrong.
    Regards

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi sowmya
      actual angle is phi and new angle (rotated angle) is theta so in clockwise rotation new angle will be phi-theta.
      or simple you can relpace -theta in place of theta in anti clockwise rotation.
      here what ever it be the same formula will be derived..
      hope your doubt has been clarified..

    • @shubhamdg5653
      @shubhamdg5653 7 років тому

      Sundeep Saradhi Sir, I believe the theta will be between P(x,y) and P(x',y'). Please correct me if I am wrong but the expression new angle after rotation = fi - theta don't make sense if it's not the case.

    • @sureshmadusanka65
      @sureshmadusanka65 7 років тому

      hm

    • @arindamroy7671
      @arindamroy7671 7 років тому

      yes

    • @aniketmandal5933
      @aniketmandal5933 6 років тому +1

      Exactly theta is given in the wrong position...actually the original line is rotated in clockwise direction by theta. Angle between original and new line is theta. Theta is not the angle between new line and x-axis.

  • @MandeepSingh-hm8nv
    @MandeepSingh-hm8nv 6 років тому +2

    here in clockwise you put the -sin in right top i think its in in the left bottom

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi mandeepplz dont get confused with the formula
      In the derivation i have used [x y] (row matrix) in the the matrix multiplication
      x'=xcos(theta) - ysin(theta)
      y'=xsin(theta) + ysin(theta)

  • @dhanashreesawant2588
    @dhanashreesawant2588 6 років тому

    Well explained👍 Thank you sir

  • @shyamprasad5865
    @shyamprasad5865 5 років тому

    nice explanation sir, it is very useful to us and thank you so much sir

  • @raviprakash3940
    @raviprakash3940 6 років тому +1

    sir at video time 22:15 , i don't think the angle theta should not be that ...it should be the angle between y and y'.. !!!!!

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому +1

      hi ravi prakash
      you are correct and thanks for observation and correction.

  • @wangsherpa2801
    @wangsherpa2801 7 років тому +2

    Is it true that we have to solve problems based on rotaion(2D) using homogeneous value otherwise it's wrong?

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +3

      hi wang
      not like that if we use sequence of transformations then only we can have homogeneous coordinates and matrix representations. for basic rotation we need not go for homogeneous coordinates.

  • @dawitertiban4600
    @dawitertiban4600 5 років тому

    Please sir help me in this question Consider the triangle defined by its three vertices A(20,0), B(60,0), C(40,100) by translating vector (100, 10) and draw the translated triangle

  • @rinkivermaofficial3299
    @rinkivermaofficial3299 6 років тому

    Well explained 👍

  • @niteshmore1791
    @niteshmore1791 5 років тому

    Sir please tell me about
    Enlarge the triangle by 25% in 2D transformation. Triangle having vertices (2, 2) (10, 2) (2 ,8)

  • @mayank_official8975
    @mayank_official8975 5 років тому +1

    in anti clockwise direction the point is roated with angle theta and the angle be phy-theta sir

  • @vikrantkhedkar6451
    @vikrantkhedkar6451 5 років тому

    Thank You Sir it i made notes from this :)

  • @aishvlogs8144
    @aishvlogs8144 6 років тому +1

    Nice sir tq very understanding

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi aishwarya
      thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

  • @charlie10-10
    @charlie10-10 7 років тому +1

    Thank You Sir for this video

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi charul
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @rabinpoudel7054
    @rabinpoudel7054 7 років тому +1

    make video on 3 d transformation also....these video r helpful

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi rabin
      thanks for ur interest and definitely i will upload them but it would take some time. i have to upload clipping algorithms and then 3D transformations.

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi rabin
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @mdmilonraza4811
    @mdmilonraza4811 7 років тому +1

    sir -sine is sine .to see Peter Shirly books anti clockwise

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi raja
      based on the matrix representation we have to write the formula.

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      i mean order of multiplication of matrices may change the formula.

  • @athiannavielayaperumal9219
    @athiannavielayaperumal9219 6 років тому +1

    In the clockwise explanation the angle theta marked wrongly (Top right corner sketch).

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi Elayaperumal
      i do agree with you by mistake i have done that and nice observation and thanks for correction.
      thanks for your interest towards our channel and share my sessions with
      your friends and subscribe to our channel.Keep following our channel.

  • @codewithhanoak
    @codewithhanoak 4 роки тому

    Great video!

  • @amitnautiyal7477
    @amitnautiyal7477 7 років тому +1

    Sir can u please cover some more topics on 2D transformation like : Reflection ,Shearing, composite translation as soon as possible. Your videos are awesome..

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi amit
      thanks for your interest towards my channel and videos.
      i will definitely upload all the topics which u have mentioned above. but one after another in the next week i will upload the composite transformations and reflection , shearing then i will go for clipping followed by 3d transformations...

    • @amitnautiyal7477
      @amitnautiyal7477 7 років тому +1

      Thank you so much sir for your reply. And kindly try to upload those topics before 4 February .

    • @anonymoustraveller2254
      @anonymoustraveller2254 7 років тому +1

      Amit Nautiyal mid sems are coming .

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi amit
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @sandakelumhalkewela7854
    @sandakelumhalkewela7854 3 роки тому +1

    thank you very much sir

  • @amanchaturvedi1903
    @amanchaturvedi1903 6 років тому +1

    CORRECTION(5:15): y'=y+ty

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому +1

      hi aman
      exactly and thanks for correction
      i found it immediately and posted the comment with correct equation.
      Thanks for watching my sessions and correction.

  • @kanwar8428
    @kanwar8428 7 років тому +1

    sir can u make a video on z buffer algorithem

  • @mohamedimthath2917
    @mohamedimthath2917 6 років тому +2

    Good explanation

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi imthath
      thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

  • @MrRabi001
    @MrRabi001 7 років тому +1

    Sir wondering a video on Hermite curve numerical example

  • @mansimaheshwari1996
    @mansimaheshwari1996 6 років тому +1

    thankyou sir , but please update your video on composite transformation. i can't find it out.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi maheshwari
      sorry i just forget to upload it and i may not sure but i will try to uplaod it.

  • @Punjab_the_land_of_five_rivers
    @Punjab_the_land_of_five_rivers 5 років тому

    helping alot
    thanx sir

  • @rehanraza1129
    @rehanraza1129 5 років тому

    ink daal liye kya sirji ...
    Nice Teaching style !

  • @wajihamukhtar3985
    @wajihamukhtar3985 5 років тому

    Good work

  • @longjamvelentina6197
    @longjamvelentina6197 6 років тому +1

    sir can u please explain 3d rotation using quartenion.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi
      i am not sure but i will try to upload it soon.

  • @amarjitkaur7653
    @amarjitkaur7653 7 років тому +1

    hello sir pls upload the vedio of Z buffer algorithm

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      Hi Amarjit Kaur i am not sure but i will try to upload

  • @ahmadfartheenkhan2393
    @ahmadfartheenkhan2393 5 років тому

    Thank You so much Sir.

  • @rajankhadka5545
    @rajankhadka5545 6 років тому +1

    sir ,plz upload the course of 3D also.

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi rajan
      i have uploaded the 3d TRANFORMATIONs and the 3d display methods are theory so that you can read in material and not required to explain much for that.

  • @onyxtechnologyx
    @onyxtechnologyx 10 місяців тому

    Thanks God Bless u

  • @abhishekjaiswal4168
    @abhishekjaiswal4168 7 років тому +1

    sir can u plz upload lecture on polygon filling

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +1

      sure after clipping i will upload one by one.

  • @shipraupadhyay8201
    @shipraupadhyay8201 7 років тому +1

    sir please give examples .......of 2d transformation

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +1

      ua-cam.com/video/pC2xapxq1Zc/v-deo.html

  • @mohammedalshammari1484
    @mohammedalshammari1484 6 років тому

    Sir i have an exam soon plz do u have good video explaining about Transformations with 3D.. And thank u 🌸

  • @smitkapse8069
    @smitkapse8069 7 років тому +1

    Thanks bhau

  • @anujdahal007
    @anujdahal007 6 років тому +1

    Sir i think you are wrong here 5:12 *(y'=y+ty)

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому +1

      hi anuj
      you are correct i have written mistake and i recognize it and posted a comment with correct one.
      thanks for observation and correction.
      Thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

    • @anujdahal007
      @anujdahal007 6 років тому

      Sir can you please make videos for bezier and b spline curve.

  • @oumwijethunge5008
    @oumwijethunge5008 6 років тому

    great ************

  • @bhartisharma7731
    @bhartisharma7731 6 років тому

    Scale the triangle with vertices A(0,0) B(1,1) C (5,2) to three times its size while C(5,2 ) keeping fixed.
    According to me ans is.
    -10 -7 5
    -4 -1 2
    1 1 1
    Is that ryt or wrong?
    Sir plz reply fast as soon as possible bcoz I have sessional on coming Monday .

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi bharti
      just follow the formula and you may get the perfect result.

    • @bhartisharma7731
      @bhartisharma7731 6 років тому

      Sundeep Saradhi sir,
      In this ques points of c take as fixed point parameters?

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi this is called composite transformation
      follow the procedure.
      1) translate the triangle to origin with parameters (-5,-2)
      2) scale the triangle 3 times
      3) translate back the triangle to original position with parameters (5,2)

  • @NirajBarwa
    @NirajBarwa 6 років тому +1

    Thank you sir

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi Niraj
      thanks for your interest towards our channel and share my sessions with
      your friends and subscribe to our channel.Keep following our channel.

  • @hoophacks
    @hoophacks 7 років тому +1

    Sir your sound is a bit low,please place your mic near yourself. :)

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому +1

      hi shaggy definitely i will increase my voice as i not using mic.

    • @hoophacks
      @hoophacks 7 років тому

      Thank you sir :)

  • @Arvindkumar-zz1mc
    @Arvindkumar-zz1mc 7 років тому +1

    Sir i couldn't find the example

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      here i am giving the link for examples
      ua-cam.com/video/pC2xapxq1Zc/v-deo.html

  • @varunrajput4605
    @varunrajput4605 3 роки тому

    The teacher is looking like Harshad Mehta 😎

  • @manthan8366
    @manthan8366 6 років тому

    great

  • @aditipungalia8196
    @aditipungalia8196 7 років тому +1

    where are the examples of these
    ??

    • @sundeepsaradhi
      @sundeepsaradhi  7 років тому

      hi aditi
      i would like to have a FEEDBACK ( in the form of video not more than 15 sec) from you towards our channel and my sessions.so that i will collect feedbacks from all and will upload in youtube,
      Send your valuable FEEDBACK VIDEO to my WhatsApp number : +91 9885466061 (91 is the country code)
      waiting for your valuable feedback.
      ua-cam.com/users/sundeepsaradhi
      SO MAKE A VIDEO WITH FEEDBACK (in any language) ON OUR CHANNEL AND SEND AS SOON AS POSSIBLE.

  • @manojkumarpapdiwal2166
    @manojkumarpapdiwal2166 6 років тому +1

    hii sir
    muje eska answer batav na plz...question peper may hai ye question.plz..answer sir
    Caculate Final coordinate for point p(2 3 4) after following 3D transformation.
    1.Rotate with angle 90° along x-axis.
    2.Reflect along xy plane..
    plz..mam give the answer

    • @sundeepsaradhi
      @sundeepsaradhi  6 років тому

      hi manoj
      you can find the formula in our sessions so that you can solve this problem.

    • @manojkumarpapdiwal2166
      @manojkumarpapdiwal2166 6 років тому

      sir... maine yasa slove kara tha...per answer paper may galat aaya tha...

  • @maneeshkumar6845
    @maneeshkumar6845 6 років тому

    Thanks sir

  • @feelgood0108
    @feelgood0108 6 років тому +1

    Videos are really good. Its worth watching. But please try to record the video in a correct way. Your voice is low. Its irritating

    • @sundeepsaradhi
      @sundeepsaradhi  5 років тому

      hi Thrishool
      thanks for your suggestion and i have improved the video and audio quality in my present videos.
      thanks for your interest towards our channel and share my sessions with your friends and subscribe to our channel.Keep following our channel.

  • @Hasan_khan996
    @Hasan_khan996 5 років тому

    Sir i have some questions can i send pic of questions about this topic...