Submarine IJN I-400 - Epoxy Resin Diorama - 1/700 Ship Model

Поділитися
Вставка
  • Опубліковано 13 гру 2024
  • I remade the telop from scratch, it's almost the same, but it has a black shadow!
    Submarine IJN I-400 - wikipedia
    he I-400-class submarine (伊四百型潜水艦, I-yon-hyaku-gata sensuikan) Imperial Japanese Navy (IJN) submarines were the largest submarines of World War II They were submarine aircraft carriers able to carry three Aichi M6A Seiran aircraft underwater to their destinations. They were designed to surface, launch their planes, then quickly dive again before they were discovered. They also carried torpedoes for close-range combat.
    ■model
    Doyusha 1/700 Submarine I-400
    amzn.to/3Jmbs3b
    AKA I-400 submarine Photo etched
    amzn.to/3oCHobz
    Wood Hunter I400 Wooden Deck Sheet
    amzn.to/3GF4qom
    ■Epoxy resin
    Flawlessresin 4kg
    amzn.to/3EK7HSj
    50mm sanding paper grinder
    amzn.to/3G3wwtj
    #艦船模型 #shipmodel #EpoxyResin #diorama
    #エポキシレジン #プラモデル #ModelBuilding #plasticmodel #縮尺模型 #スケールモデル #Scalemodel #amegraphy
    Ame
    twitter
    / amegraphy
    instagram
    / amegraphy.modeler
    Second channel @AmegraphyPortrait
    / amegraphyportrait
    plastic model playlist
    • Model build 模型制作

КОМЕНТАРІ • 55

  • @Senachan0113
    @Senachan0113 2 роки тому +9

    なんか天城で失敗しちゃってからなのか、むちゃくちゃ本気出してきてるよな、、、、いやすげえ

  • @にぼし-y1l
    @にぼし-y1l 2 роки тому +5

    伊400とともにロマンもレジンの中に入れた傑作

  • @Kコジロー-u8w
    @Kコジロー-u8w 2 роки тому +4

    面白い!自分の 作品を傷ませることなくとっておける!水中の表現力!

  • @今井一義-h9q
    @今井一義-h9q 2 роки тому +2

    潜航中の潜水艦という発想はなかなか無い発想ですね。素晴らしい出来栄えです‼️

  • @shojiyamase5838
    @shojiyamase5838 2 роки тому +8

    水中用モビルスーツとかでもやってほしい

  • @JEDAYOB
    @JEDAYOB 2 роки тому +3

    凄い!!とても素敵なジオラマ。潜水艦の模型は、もぉこれに限りますね・・。まさに潜水してます!!ですね。凄く勉強になりました。
    小生も艦船大好きで、下手の横好きながらプラモデル製作も大好きです。
    空母天城の最期と、この度のような潜航中の潜水艦のジオラマに挑戦してみます。素晴らしいジオラマ製作方法と、そのアイデアに・・本当にありがとうございます!!

  • @OzScalemodeling
    @OzScalemodeling 2 роки тому +2

    Was the worlds only Aircraft Carrier Submarine. Looks Great ! 👍

  • @zayu6237
    @zayu6237 2 роки тому +4

    항상 잘보고 있습니다. 좋은 영상 감사합니다!

  • @anthonyKgo
    @anthonyKgo 2 роки тому +3

    浮上した瞬間とか再現したら迫力がありそう

  • @cesarguadalupebecerravilla2784
    @cesarguadalupebecerravilla2784 2 роки тому +3

    Good job, it's amazing that you use the same technique you used with the Yamato but this time with a submarine under water. Greetings from México.
    Historical fact: The submarine you used for the diorama belonged to the sen-toku class. Admiral Yamamoto wanted to use these aircraft carrier submarines to destroy the Panamá Canal, but due to the situation in Japan at the end of the war, he decided to call off the attack.
    PS: Introduction of I-400 (Shion) in Kantai Collection:
    Nice to meet you, admiral. I am the oldest of the Sentoku class, the first ship, I-400. Hmmm... You can call me... Shio... Err... Shion.

  • @tubule22857
    @tubule22857 2 роки тому +4

    すごいです。こういうディスプレーの発想もあるのですね。びっくりしました。
    次作はスクリューの攪拌によるシャバシャバも再現できないでしょうか。
    潜望鏡を上げているシーンや魚雷発射シーンなども楽しいかもしれません。

  • @shebadoge
    @shebadoge Рік тому +3

    I always wanted to do the I-400 because it has a plane

  • @LIE-zn2uu
    @LIE-zn2uu 2 роки тому +1

    やっぱり潜水艦はレジンアートが良く合いますよね!
    あと、確実に技術が向上してる気がする…。

  • @muahlakaparak
    @muahlakaparak 2 роки тому +3

    Nice design with resin

  • @kevwebb2637
    @kevwebb2637 2 роки тому +1

    Both I-400 and I-401 are still at the ocean floor near Hawaii after the war. The U.S. Navy scuttled them to keep them from falling in the hands of the Soviets. By the way, I think you might find interesting. In Star Trek: The Next Generation season 2 Episode 11 there is a ship in that episode with the name Yamato(which is the sister ship to Enterprise-D from that series).

  • @melmoore6885
    @melmoore6885 2 роки тому +1

    Superb job as always, really enjoyed it.

  • @britishneko3906
    @britishneko3906 2 роки тому +2

    I-400 my beloved
    literally... the I-400 (the whole class also) is my favourite subs

  • @北野賢治郎
    @北野賢治郎 9 місяців тому +2

    レジンの打ち継ぎ面が出てしまうのは、どうにか工夫できないものでしょうか・・
    気にならない程度なんですが、やはり気になります。私も考えてみます。
     微細気泡も、潜水艦航行時のエフェクトと思えなくも無いのでこれはOKですね。
     表面研磨は時間と手間の勝利ですね。
     お疲れさまでした。
     お見事です!!
     当方の積みプラの伊400の着工の起爆剤動画でした。

  • @АндрейШмырев-х8н
    @АндрейШмырев-х8н 2 роки тому +2

    Красивый сувенир получился....Только пузырьки в смоле убрать надо было!

  • @thomasb.285
    @thomasb.285 2 роки тому +2

    Looks cool, great idea und well done

  • @isaiascastro7150
    @isaiascastro7150 2 роки тому +2

    I like It, what will happen if you put a sheat of dark marin blue under the base, you don't need to glue It, just to see how will be on the top. Will it look like deep sea?

  • @raymondwelsh6028
    @raymondwelsh6028 2 роки тому +2

    Bubbles a problem. I’ve seen a pressure vessel used. After poring the resin the whole thing is placed in a pressure vessel till it cures, probably at 30 to 50 psi. Love your work but marred by the bubbles.🇦🇺

  • @Jhonston_annkomoti
    @Jhonston_annkomoti 2 роки тому +5

    伊-57 ありますか?

  • @Toby0211
    @Toby0211 2 роки тому +1

    Great job 👌👌👌

  • @АнтонМаркин-о7б
    @АнтонМаркин-о7б 2 роки тому +3

    Очень круто)

  • @crazywarriorscatfan9061
    @crazywarriorscatfan9061 2 роки тому +1

    Amazing!

  • @scale-adventure
    @scale-adventure 2 роки тому +3

    magnifique 👍👍

  • @BangladeshGamerArham2
    @BangladeshGamerArham2 2 роки тому +3

    this is underwater aircraft carrier

  • @xenon5
    @xenon5 2 роки тому

    You can try using a vacuum chamber to remove some of the bubbles. But still great job, looks amazing

    • @rustyneedles3743
      @rustyneedles3743 2 роки тому

      it's not a great job though, lol, the fuck is wrong with you people, it's a big huge fail, no weathering, too many bubbles, big split down the middle and yet you still think it's a good job, no, a great job, lol ... wow 🤦‍♂️

  • @randomguy5022
    @randomguy5022 2 роки тому +2

    To much bubbles for me but still a great diorama

  • @jacob-ll2jd
    @jacob-ll2jd Рік тому +2

    nice!

  • @akoshorn2463
    @akoshorn2463 2 роки тому +1

    regarding the bubbles maybe a surfacing position would be better xD I understand the difficulties of polishing the resin with parts above the surface but because of the waving finish the top side dont need to be perfect.. also it would bring some life into the diorama which isnt a bad thing as we talking about a diorama... building up by layers even a torpedo launching is possible to depict injecting air into the not set resin.. of course all these unproved ideas xD

    • @raymondwelsh6028
      @raymondwelsh6028 2 роки тому

      Yeah, bubbles a problem. I’ve seen these sort of things done where after they pour the resin they put the whole thing in a pressure vessel under perhaps 30 to 50 psi till it cure’s. Maybe a solution🇦🇺

  • @kevwebb2637
    @kevwebb2637 2 роки тому +2

    Hmm, would USS Barb(Gato Class) be next? The only US ship that demolished a Train during the Second World War. How?, Train Wrecking with a Mine set by crew who was a Eagle Scout,

  • @623zera
    @623zera Рік тому +2

    生き物無しでテラリウムにしても良さそう

  • @YK-od6un
    @YK-od6un 2 роки тому +2

    レジンの研磨、機械化できんのだろうか。

  • @happytimes010157
    @happytimes010157 2 роки тому +1

    Fantastique!

  • @t3avelos
    @t3avelos 2 роки тому +1

    too many bubbles for me and a separating line at the waterline, why?😬

    • @roadweary5252
      @roadweary5252 2 роки тому

      The bubbles may be from stirring the epoxy too fast and the separating at the waterline is from pouring the epoxy in 2 separate stages

    • @t3avelos
      @t3avelos 2 роки тому

      @@roadweary5252 the 'why' was rhetoric. I used to be an ipms contest judge at my modelling years, so if ppl post their work for feedback, I would call out the most obvious things that can be improved

    • @roadweary5252
      @roadweary5252 2 роки тому

      @@t3avelos ahh gotcha.

    • @rustyneedles3743
      @rustyneedles3743 2 роки тому

      and no weathering what so ever, makes it a bland, uninteresting diorama

  • @goforitpainting
    @goforitpainting 2 роки тому +1

    cool

  • @akatakusgo256
    @akatakusgo256 2 роки тому +2

    レジンの継ぎ目が目立ちませんか。

  • @tonbopro
    @tonbopro 2 роки тому +2

    👍👍👍

  • @IKUYO1109
    @IKUYO1109 Рік тому +2

  • @sam_the_dachsund_47_85
    @sam_the_dachsund_47_85 2 роки тому +2

    Hi Amegraphy, I tried your water melting acrylic idea but I failed and I ruined my HMS Prince of Wales hull if anyone has one, will you please give it to me thx

  • @rustyneedles3743
    @rustyneedles3743 2 роки тому +2

    no weathering on the sub ? too many air bubbles, visible center layer ... horrible and boring diorama

    • @thomasb.285
      @thomasb.285 2 роки тому +1

      Make it better

    • @sam_the_dachsund_47_85
      @sam_the_dachsund_47_85 2 роки тому

      Be nice I reckon that is true but I use a sharpie to paint me models for better control Also does anyone have a spare HMS Prince of Wales hull O can use?

    • @murderouskitten2577
      @murderouskitten2577 2 роки тому

      who even weathers the subs ? :D

    • @rustyneedles3743
      @rustyneedles3743 2 роки тому

      @@murderouskitten2577 Grown adults do. Now back to mummies tit lil fella.

    • @rustyneedles3743
      @rustyneedles3743 2 роки тому

      @@sam_the_dachsund_47_85 you use "sharpies" to paint your models ... 🤦‍♂️ ... wow