EZ Decoder System: The Simple Two-wire Solution
Вставка
- Опубліковано 10 лип 2024
- 00:00 - Introduction to The Webinar
02:59 - The Why
04:58 - Conventional Wiring vs. Two-Wire Systems
13:16 - EZ Decoder System Overview
19:45 - Decoder Output Modules
23:37 - EZ-1 Decoder
26:05 - Decoder Setup and Programming
27:58 - Pump/Mastervalve Activation and operation
28:47 - Flexibility and Affordability
30:32 - Pro-C EZDS Configurations
31:42 - HCC/ICC2 EZDS Configurations
33:06 - Wiring Distance Specifications
35:06 - Presentation Recap
37:10 - Practical Use Scenarios
41:58 - Q&A Session - Навчання та стиль
Excellent video. Thank you. Keep up the good work.
Hunter Universty is great. It really helped me to take classes online when I first started as an irrigator.
Great to hear!
Hi, I have installed irrigation in 3-direction like x,y, and z. May I connect all three connections in the EZ-dm module?
hi, i have bought ICC2 and wants to learn how to connect pump start relay with ICC2 to start the pump at the same time of station start time.
Thank you for contacting Hunter Technical Support.
Hello,
For more information on how to connect a pump start relay to a controller please see the link below.
www.hunterindustries.com/support/pump-start-relay-connect-controller
The Pump Start Relay can be activated in accordance with any particular station. The controller default setting is to activate the Pump Start Relay output with all stations; however, it can also be programmed to be active or disabled with any individual station.
Thank you again for contacting Hunter Technical Support. Please let us know if we can offer any other assistance.
Great video. It helps a lot. Only thing I don't understand: With an HCC and an EZ Decoder module, I get right away 52 stations? Or do I have to buy the individual modules (like before) to get 52 stations?
Thank you for contacting Hunter Technical Support.
The HCC when used with the EZ decoder module alone will be ready for 54 stations set up, you still have the option to use 8 station modules before the EZ-DM in case you would like to have zones working the conventional way, and the rest on decoder.
Thank you again for contacting Hunter Technical Support. Please let us know if we can offer any other assistance.
The HCC and Icc2 will they work with a Dual-1 decoder or does it have to be the EZ-1 only decoder??
The EZ decoder system works with the HCC and ICC2 controller lines.
good
Thanks for watching!