Ah and you covered the upper spawn as well super 👌🏻 The north is the worst ! But they break trough the other block off over the water 🤓 Canny is just a little wack same as all the glitches 😅 (al my bridges are gone ! What I have now is kinda similar to what you’ve just build .
I have a ton of prebuilt level 130 traps with maxed out perks given to me, but they aren’t exact. would that affect the build?? I’m not sure if i should just grind perk ups now cause it’ll take a bit but i’ll do whatever works
@@larsisHeyy i checked the playlist again and I couldn’t find it I found a guy who built it but it was kinda hard yk watching your videos are way easier and the video is kinda old it’s like 4 years old
Hey Larsis I've been copying your builds for endurance on Stonewood, Plankerton, Twine, Canny I'll do eventually, but I've done now several test for Stonewood now and I can't fully afk it as of now I got to wave 25 lost on 24 and the husk got to my "A" amp breaking down some walls above to the East then another test where I lost on 30 when they got to my "D" amp just next to "A" I need some help if you could kindly lend it and I bring you to my base and you help out/tell me what I'm doing wrong if anything. Thanks in advance!
Hey You are using the main or the cheap build You have a flex amplifier? What is your traps durability ratio You used full durability drop traps for the spawn cover?
@larsis I'm trying to copy your traps one to one I have no full dura drop traps I've built the same block offs you did per the vids right now I'm rebuilding the base and then after getting my traps setup or the least most of them anyway then after all that re-test.
yoo larsis thank you so much for the twine endu builds i built it and done it so many times but sometimes theres some issues that may happen so can i dm u on discord or join my hb and check the endu build please?
@@larsisyes i checked them all and i have around 289% dura My main problem now is with the devil amp north side i think on wave 6 cause smashers keep charging in it and breaking the main tunnel especially the walls in the middle with the wall launchers like if their was no loop bridge and i didnt find an updated video for that. My second problem is the valley amp in wave 25 with the ufo cause smashers keep charging and destroying the whole tunnel. i watched the updated video and changed the loop bridge several time and added some support to it but havent tried it yet so the problem is just devil amp for now.
Devil amplifier is bugged right now, smashers don't recognize the amplifier during wave 6 same bug with Ridge smashers during wave 22 I finished the last direction for Canny valley Flex amplifier today I will be testing Twine peaks a lot this week for new edits for Devil
I built my base without your tutorial, I did it very differently, glad you succeeded!
Muchas gracias larsis por tu duro trabajo de investigación y construcción , nos ases el juego mas facil ❤
I had to build mine without the guide but my tunnels are still very similar ❤️
Mate I love u for this ❤ Tysm
16:00 i cant put sound wall in terrain for some reason, where can i place instead?
Break the wall then place the sound wall
@@tlgoldz4059 thank you 👌
Ah and you covered the upper spawn as well super 👌🏻
The north is the worst ! But they break trough the other block off over the water 🤓
Canny is just a little wack same as all the glitches 😅
(al my bridges are gone ! What I have now is kinda similar to what you’ve just build .
Ah and you covered the upper spawn as well super 👌🏻
The north is the worst ! But they break trough the other block off over the water 🤓
yo larsis, the big roof that u built over the amplifier in an old vid still working? And what im supposed to do? I destroy it all?
Hey
Depends If you have the flex amplifier or not
After CV endu I removed everything from the map and never bulit again.
I have a ton of prebuilt level 130 traps with maxed out perks given to me, but they aren’t exact. would that affect the build?? I’m not sure if i should just grind perk ups now cause it’ll take a bit but i’ll do whatever works
Use them, but make sure to use full durability drop traps for the spawn covers to avoid any issues
Use high durability ratio as well
Hey Larsis does your cannery valley endurance playlist still work good?
Yup
will you be covering all of the flex amps for canny or just this amp?
Don't know yet
Do your old builds still work
Yup, works well
Hi do you have video for the amplifier down there
Hey
yup, check the playlist
@@larsisHeyy i checked the playlist again and I couldn’t find it I found a guy who built it but it was kinda hard yk watching your videos are way easier and the video is kinda old it’s like 4 years old
Is it an amplifier I don't have built?
Check the amplifiers locations video, which amp is it
@ you do have build but I didn’t realised it’s in the flex amp videos because I didn’t start watching them i am soo sorry for all of that
I will dm you in discord i can send you pic
in another vid u built a massive roof over the amplifier with ceiling drop is that still ok?
I'm testing another build, that's why it looks different
use the one in the playlist, works very well don't worry
the worst Amp I swear I only want help with the build connected to A amp since the block off will be destroyed as spawn for flex amp
Flex Amp not active in my base I activated another Amp so no critical update for the old afk canny valley endurance?
Yup, the old build works well
Ok bro thks information is good
Hey Larsis I've been copying your builds for endurance on Stonewood, Plankerton, Twine, Canny I'll do eventually, but I've done now several test for Stonewood now and I can't fully afk it as of now I got to wave 25 lost on 24 and the husk got to my "A" amp breaking down some walls above to the East then another test where I lost on 30 when they got to my "D" amp just next to "A" I need some help if you could kindly lend it and I bring you to my base and you help out/tell me what I'm doing wrong if anything. Thanks in advance!
Hey
You are using the main or the cheap build
You have a flex amplifier?
What is your traps durability ratio
You used full durability drop traps for the spawn cover?
@larsis I'm using the main build. I also have no flex amp. Is that needed?
No need to build any flex videos
What about the durability ratio and the full durability drop traps
Also, re check the block offs
@larsis I'm trying to copy your traps one to one I have no full dura drop traps I've built the same block offs you did per the vids right now I'm rebuilding the base and then after getting my traps setup or the least most of them anyway then after all that re-test.
Is there a update step by step or no
This is the new main build video, no updates needed yet
Have you got a discord or something where I could speak to you
Check the description
Oohhh wowww you’ve done it !!! ❤❤❤🫡🫡🫡🫡 thank you Sir !!! 🥳🥳🥳 I’ll go work on it tomorrow 😃😃❤️
which amplifier is this on the map? is this the worst decision?
Check this vide ua-cam.com/video/cuaWuORxqAo/v-deo.html
How do I know which flex I have?
Check the amplifiers locations video
Why does my aplifier c keep on failing its the north one
run endurance again and check what happens so you can fix it
mostly it's a mission block off or something
@ the zombies brake my traps and same with tornado
That's a bug
But today's update fixed it
Test it again
@@larsis I’m also having problem with amplifier d south I think but I can fix it
@@larsis it’s fixed
Bro please could you help me I need a lot of help with twine endurance I’ve tried many builds and it doesn’t work I need bad help
Check the channel playlists, I coverd all the endurance builds for all the bases
Is the discord server link expired? because I cant join
Yup
Try again, if it didn't work tell me
@@larsis dont work for me its tells me expired.
Try this one
discord.gg/vkVt8c6S
@@larsis it worked thank you
Good thing I didn't placed this one 😁
Used your code again for few more things, and will keep using it for future purchases 😉
Thx for the support:)
@@larsis np mate, you deserve it for all the time effort you put into these awesome videos 😉👌
yoo larsis thank you so much for the twine endu builds i built it and done it so many times but sometimes theres some issues that may happen so can i dm u on discord or join my hb and check the endu build please?
Hey
You checked all the update videos?
What is your traps durability ratio
@@larsisyes i checked them all and i have around 289% dura
My main problem now is with the devil amp north side i think on wave 6 cause smashers keep charging in it and breaking the main tunnel especially the walls in the middle with the wall launchers like if their was no loop bridge and i didnt find an updated video for that.
My second problem is the valley amp in wave 25 with the ufo
cause smashers keep charging and destroying the whole tunnel.
i watched the updated video and changed the loop bridge several time and added some support to it but havent tried it yet so the problem is just devil amp for now.
Devil amplifier is bugged right now, smashers don't recognize the amplifier during wave 6
same bug with Ridge smashers during wave 22
I finished the last direction for Canny valley Flex amplifier today
I will be testing Twine peaks a lot this week for new edits for Devil