Great start! You play so quickly, I always find myself wasting time and regretting it later. Learnt two new tricks from you on this one (flares in the backpack = good light source + burst a pipe to use it as a cheap cowl). So thanks! Keep up the good work :)
Get start! Thanks for doing Venus on the hard mode. I hope there is a next episode On the solar - Angling the panel down to about 40 will help. And now that you have the electronics printer. A sensor and 2 logic i/o reader+writer will track in the horizontal.
Yo i don’t usually comment on videos but thanks for putting this up. I’m doin a brutal Venus run too except I’m getting close to running out of water. Looking forward to see how you continue
lol, never though of bumping pressure up. Took me while to understand what was happening with the oxygen. Tilt your solar panel, will help with power. 18:42, the urge to click on that button, almost! My airlock crate experience was not as smooth xD 31:58 Yahh, I gavup on those flares, they are not there when you need them, at least you manage to find it at 35:45 why in the world is your waste at 952c?
I've just checked. The waste in that pipe is at 1020 C, lol. I didn't realize this until now. It's not much, though. 34 moles of O2 and 55 moles of CO2. I still have 2.22k O2 at 15 C in the big oxygen tank. I'll collect future batches of waste to separate pipes/tank. I have no idea why the temperature is that high. I guess it's the downside of bumping up the pressure and toggling filtering on and off. I've already lowered the pressure at the end of the video. The other full waste tank in my inventory is at a temperature you would expect more or less. Flares served me well for lighting and navigating (except the times you are out of line of sight to them) :)
I find myself facing the output of the arc furnace towards the input of the autolathe so I don't have to always pick up the ingot from the ground. Is that a good idea because I don't see other players doing that?
Other than autolathe, you will be using three other printers (2 extensively). You want to spread ingots and alloys as much as possible, but you can't avoid resource juggling between printers, especially early on.
I highlight the "Filter On/Off" toggle and just use it with a keyboard shortcut. No mods. :) I started a new series and don't use this technique there.
Great start! You play so quickly, I always find myself wasting time and regretting it later. Learnt two new tricks from you on this one (flares in the backpack = good light source + burst a pipe to use it as a cheap cowl). So thanks!
Keep up the good work :)
That airlock loving chest would have been the death of me 🤣
Get start! Thanks for doing Venus on the hard mode. I hope there is a next episode
On the solar - Angling the panel down to about 40 will help. And now that you have the electronics printer. A sensor and 2 logic i/o reader+writer will track in the horizontal.
hoping for more videos from venus
Yo i don’t usually comment on videos but thanks for putting this up. I’m doin a brutal Venus run too except I’m getting close to running out of water. Looking forward to see how you continue
GG good start 👍
lol, never though of bumping pressure up. Took me while to understand what was happening with the oxygen.
Tilt your solar panel, will help with power.
18:42, the urge to click on that button, almost!
My airlock crate experience was not as smooth xD
31:58 Yahh, I gavup on those flares, they are not there when you need them, at least you manage to find it
at 35:45 why in the world is your waste at 952c?
I've just checked. The waste in that pipe is at 1020 C, lol. I didn't realize this until now. It's not much, though. 34 moles of O2 and 55 moles of CO2. I still have 2.22k O2 at 15 C in the big oxygen tank. I'll collect future batches of waste to separate pipes/tank. I have no idea why the temperature is that high. I guess it's the downside of bumping up the pressure and toggling filtering on and off. I've already lowered the pressure at the end of the video. The other full waste tank in my inventory is at a temperature you would expect more or less.
Flares served me well for lighting and navigating (except the times you are out of line of sight to them) :)
@sworn973 You should copy the printer stacking trick 😊 just imagine the space you would have
I want series dude
I find myself facing the output of the arc furnace towards the input of the autolathe so I don't have to always pick up the ingot from the ground. Is that a good idea because I don't see other players doing that?
Other than autolathe, you will be using three other printers (2 extensively). You want to spread ingots and alloys as much as possible, but you can't avoid resource juggling between printers, especially early on.
You say you are using no mods but I hear your oxygen switching on and off as if you have a hard suit with a chip in it!
I highlight the "Filter On/Off" toggle and just use it with a keyboard shortcut. No mods. :)
I started a new series and don't use this technique there.