Various woodworking connection methods that are surprisingly not easy
Вставка
- Опубліковано 5 жов 2024
- This video shows how to connect a wooden bar without steps and gaps. A long neck bar connection cannot be used with clamps, so a strong adhesion is not possible, making perfect work impossible. I made a video on how to overcome these difficulties.
For glue joints that are prone to slippage, I use two methods taught to me by a custom furniture maker.
1. Brush on a thinned glue solution (50/50 water and glue) and let dry, Then brush on full strength glue for the join.
2. Add a little sand (10 grains is all you need per sq in) on one bonding surface before clamping. This mechanically prevents the joint from slipping when clamped.
This is an example of a scarph or scarf joint. Normally you'd use a 15-30 degree angle, but that isn't safe to do on a miter saw unless you have a jig to hold the wood at the proper angle. A 15-30 degree angle has a great deal of glue surface for a very strong joint and is commonly use for table or chair leg repair.
Señor un excelente trabajo que nos a compartido, le deseo lo mejor y mucho éxito.
Gracias 😊 Que tengas un buen día 👍🍀👌
On a cylindrical object like that, I would cut a long flat portion (say 10 inches, depending on finished length), on both pieces by removing 1/2 of the material, lengthwise, and then do a glue up, etc. Your surface area of the joint would be 5x to 10x larger, and the mechanics of the joint (regardless of surface area) would be tremendously stronger as well.
Good… Thank you 😊 Have a nice time 🍀
I try to avoid joining dowel for that reason but your method is good to know if I really need to. Thanks for sharing
Thank you 🛠️👍😊 Have a nice time 🍀
역시
아이디어가 대단하네요
간단한것 같으면서도 생각지도 못한 아이디어가 신박하네요
잘보고갑니다 ~~
감사합니다 😊👋🇰🇷😊 좋은 하루 되세요 🍀
창의력이 앞서가시는거 같아요~~ ㅋㅋ
저같으면 첫번째시도한거에서 멈추었을듯요🤑🤑🤑🤑
감사합니다 😊💚😊 좋은 주말 하루 되세요 🍀
Double ended dowel screw with glue, maybe. You would still have a problem getting an exact center for both screw ends but you could make a jig.
👍Thank you 😊 Have a nice time 🍀
Excelente tutorial maestro, I+D de empates en cilindros de madera, creo que aún queda alguna opción, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia)👌🤓
Gracias 🇨🇦💚💚💚🇰🇷
Que tengas un buen día 👍
5분 사라졌습니다..ㅋㅋ 영상미가 정말좋네요!
감사합니다 😊💚😊 좋은 하루 되세요 🍀
I never expected it to be easy.
Amazing skill
Thank you 😊 Have a nice time 🍀
잘 지내삼~?
항상 잘보고 있음.
굿 주말~^^
빈~~ 주말 잘 보내고 얼렁 올라와라~~
해피 주말 🍀🍀🍀
테트리스처럼 조립하는 방식도 괜찮지 않을까요? ㄴㄱ 모양으로 결합 방식이나..
네 맞습니다. 도브 테일이라 하는 장부 방식이 있긴 한데 이번은 짜맘춤 없이 테스트 해봤습니다. 주말 잘 보내세요~😊💚🍀🛠️
@@BStarCrafts 그런방식을 도브테일이라 하는군요. 언제나 이런영상 감사합니다~
I thought he was actually gonna do it right. The second to last one was pretty perfect except the plug grain wasn't put in straight
Thank you 💚💚💚👍😊 Have a nice time 🍀
Parabéns ótimo trabalho,te desejo um ótimo final de semana
Obrigado 😊🛠️😊 Tenha um bom dia 🍀
Travail génial et à la perfection !
Merci. passe une bonne journée 😄🍀
Exelente .. y gracias por la traducción al español .. ya tienes un seguidor nuevo
Gracias 😊 Que tengas un buen día 👍🍀👌
You're getting a Like from me for using toothpicks..
Thank you 😊 Have a nice time 🍀
Great idea 😎👍
Thank you 😊🤜🤛🍀💚Have a nice time 🍀
Больше творческих успехов🥰👍👍👍🇷🇺
Спасибо 🛠️🇷🇺🤜🤛😊 Хорошего дня 🍀
Пва у него гамно
이 분야로 일을 하고싶은데 어떻게 도전하면 될까요??
시작은 근처 공방에서 배우는 걸 추천해 드립니다.
я бы сделал нечто вроде "ласточкиного хвоста" с выпуском 20 см.и дополнительно использовал бы несколько дюбелей.или как показано во втором варианте ,но центральный дюбель должен быть значительно длиннее.но с отцентровкой действительно будут сложности.требуется точная оснастка.
👍👍👌👌 Спасибо 😊 Хорошего дня 🍀
Screws always add a weak spot. Proper joinery is the only way to go, or better to manufacture a complete replacement piece.
Thank you 😊 Have a nice time 🍀
En utilisant une colle chimique 🤔
👍👍👍👌
Gracias 😊 Que tengas un buen día 👍🍀👌
Is the pencil special in the neighbourhood..and where can I get it from??
That pencil was a gift... It is a Pentel product. Thank you 😊 Have a nice time 🍀
Corte reto , use uma broca bem mais grosssa que esssa do vídeo, cole um pino de madeira Grosso e está resolvido.
Gracias 😊 Que tengas un buen día
@@BStarCrafts obrigado. Parabéns pelo trabalho e profissão.
👍 Can you tell me, where to buy the driller for dowels you made?
It is a countersink drill bit, which is a brand called EZEN KOREA, it is sold on Amazon shop
which is currently being sold in Korea, Japan, and the United States, and it is said to be sold in Europe. It comes out when you search by Ezen drill bit. Thank you 💚👍
O melhor seria fazer "L" na medeira e emendar L com L.
Thank you 😊 Have a nice time 🍀
What about something similar to a Morse taper ?
Good 🍀👍💚
F L E X T A P E
Ensamble cola de milano.... Saludos
Gracias 😊 Que tengas un buen día 👍🍀👌
молодец
🍀👋😊
جميل
شكرا 😊🛠️👋💚😊 أتمنى لك نهارا سعيدا
А почему нельзя "ласточкин хвост" или другие красивые, как у H Carpenter? И даже просто, одну на клин (симметричный) а другую, ответную, "обратный" клин.
Площадь склеивания заметно больше и про стягивании не уведёт.
👍👌🙏
Спасибо 😊 Хорошего дня 🍀
А нормальным пва клеем слабо воспользоваться?
Это тоже хороший способ. я попробую позже
Proba con un rayo de jupiter y listo
👌
Thank you 😊 Have a nice time 🍀
👍👍
😊💚👍
Если чё не до конца посмотрела твой ролик.. Но лично по своему опыту. Ничего не поможет приклеить двух деревяшек.
Фреза микрошип вам в помощь.
لو عايزها حديد هات كويله حديد بس طويله شويه وردة الغراء ايبوكسى وهتظبط معاك
👌👍🛠️ شكرا 😊😊 أتمنى لك نهارا سعيدا
الشكر لله حبي
Bravo!
Thank you 😊 Have a nice time 🍀
Spline?
Полная шляпа
👍👍👍❤️
😊💚👍
👍👍😁🇧🇷
Obrigado 😊🇧🇷🍀💚😊 Tenha um bom dia 🍀
🙏👍👍👍
😊👋👋🤜🤛
😅😂😢👍👎👌👏
Thank you 😊 Have a nice time 🍀
👍👍
👍😊💚👋