I use the rectangular black one Very simple to use and customize (Tip : if you have some problems at starting, you have to put a delay at the device starting - in setting software)
@@upir_upir Hi, no my Pc is not custom, it’ s a full BeQuiet! (Pure base 550 FX + Pure loop 2 FX 360 + Pure power 12M 850w) + AMD Ryzen 7 5800x + Rx 7800 XT …… 😇 The display is in the case, behind the glass, and show me for CPU GPU SSD RAM the % of use and the temperature I have also on this display 2 graph for up and download It’ s plug directly on the USB Motherboard
I was unsure if it was possible to add new sensors, as I needed the fan sensor. Thanks to your video I discovered that it is possible. Thank you very much and congratulations for the video
I've been looking into these, but to be honest, I'm not thrilled about installing software from some janky, no name, Chinese company. I just want the screen.
You can still use them the play video, and in that case, you don´t need that software, but obviously that usage is quite limiting. Another option is to use a third-party open source python scripts, but those are currently only for the small display, not for the big one or the round one. Hopefully someone will update those scripts for the other displays as well... otherwise, the display (display panel) quality is great.
I found this video after the other comments you replied too :) Very helpful but I bought the 3.5.. realises it and ordered the 5 inch one as well so I got both coming but I will be using the 5inch and giving the 3.5 to a friend. The only thing I am not sure on is the cable length. I hope it’s long enough I got the software ready and then I’ll load and set them up. I’ve got an 8GB micro SD card to plug in. I will test how it effects FPS/ performance on my system when I get a chance on its arrival :) I love how you check the system and software. I’ve gone into my firewall and restricted the app from connecting to the internet completely so it’s local only. Just to be sure!
Thank you for your comment. I agree that the 5 inch is much better compared to the smaller one. That said, I´m sure your friend will still be very happy :) The cable is not so long, but you can use any other usb-C cable instead.
@@upir_upir I am going to try and see if I can setup the screen as a sim hub first… maybe? Unsure but be good to see. Just take a look a sim hub screen and you see it’s a usb screen so I will see. If not which I doubt then he can have it :)
Yes, it works with sim hub without any problems so when my 5” arrives they will be on monitoring and my 3.5” is being used with my wheel as a dial etc for racing and it works super easy being supported :)
Hi!) My screen not working, 3.5 inch:((.. Please tell me, in the device manager in the port parameters, how many bits per second, how many data bits, is there parity and what flow control?
Looks interesting might gonna pick it up for a project My idea is to use it as a display for sim rigs I know there are plenty of products already for that but expensive like hell
Thank you, but for your case, you would probably need an external monitor. This one is purely for displaying statistics. Other option is to use the Python scripts, but those are for now only for the smaller screen. Anyway, good luck with your project!
@@upir_upir you are more then welcome are there any recommendations around similar sized displays like the ones you shown off ? That are also in that quality? And by chance to you know when Python script compatibility comes to the bigger ones ?
is the software compatible with linux? (specifically mint, since that's what i'm using), was just wondering before i decide to buy one and i couldnt find an answer anywhere
The only display tha you can use with Linux is the smallest one (3.5"), with Python scripts, not with the official software. The official software only supports Windows. Hope that was helpful.
Thank you! The FPS is present in the "normal" version for round display, and for the beta version for the 5inch display. I haven´t tested it yet though.
Love these and the theme editors, especially for newbies. Are the touchscreen versions able to be programmed to function as trackers? Or what could you recommend please? Looking to create a simple tracker with touchscreen lcd (and possibly knob) where users would just tap an up/down button (logical or physical) to change the score/tracker. Thanks much!
Thank you for your comment. There are no touchscreen versions available as of right now, as those are meant to be installed inside the PC case, where you don´t touch those. What do you mean by "tracker"?
@@upir_upir thanks for the note back! Noticed Waveshare has several touch display modules on their site available (e.g., SKU: 24321). As for trackers, looking to build a simple score type of tracker where the output value is set by the end-user. For example - smart watches have a functionality to keep track of the number of glasses of water are consumed each day so the user would just interact with this tracker’s on-screen or buttons or knobs to increase the number of glasses consumed each time throughout the day. Very simple “tracking” system so wondering what all I can use to create something simple like this? Thanks again!
@cyberc0l0mbiana probably the simplest way how to do something like this is to use “intelligent” displays. The easiest one to use is Nextion, I have a few tutorials here on this channel. Usually you use those with other microcontroller like Arduino, but for this simple usage, the Nextion display alone should be sufficient. Just choose your preferred size and your should be good to go. Let me know if you have any questions and good luck with your project.
@@upir_upirthanks so much for your time and response. Also found the Lilygo T-Touch S3 Pro which is almost perfect as I wouldn’t have to figure out how to power it etc.. and it’d be quick for a prototype I need but doesn’t use a theme editor. Have you tried this particular device before? Wondering if knowledge of C++ or if any other coding/programming languages are required to make the best use for it as I need to hire a programmer to create a major project for me. Thank you again!
@@cyberc0l0mbiana Lilygo screens are great, but again, if you are looking for something simple that you don´t need to write code for, Nextion screen will be very easy to setup and get running.
I don´t think that is related to the display, but rather your PC configuration. It seems like (some) USB ports are still on after the shutdown - that might be intentional. Perhaps use a different USB port or try to configure it to turn off? I´m sure google will know more about that.
Friend, good morning!!! I have a 3.5 display similar to yours that is connected to the PC via a USB C cable. This week I bought an Acegeek watercooler that has a display with the temperature on the pump itself, however when installing the program to work the display the 3.5 screen remains white. I checked in the root of the driver that they are the same and I think that for this reason one cannot project the image (generally the 3.5" screen). The watercooler is connected to USB directly on the motherboard (like this round video screen) What can I do? Could you help me?
Hi, can I run the round 2.1 inch screen without the software? Like I just set a certain gif or video once and it will always play it without the software. Thanks
Sure, you can do that. If you only want to play the video on loop, you don´t need to run the software. That´s true for all the screens except for the smallest one.
Probably not. You still need to send some graphical data to the display, and Arduino simply does not have enough power. You can get it working with other microcontrollers, like Raspberry PI - github.com/mathoudebine/turing-smart-screen-python
@@upir_upir I think issue with Arduino is more lack of a USB host port, not the data rate as the serial port speed is only 115200bps. Maybe an esp32s3 or rp2040 running Micropython perhaps?
Hello nice video ; D btw I have a question and I dont know if u can solve my doubt but what is the diference about the turzx screen 2.1 and the other who have the separate cables, there are differences about the quality of display or something more apart from the removable cables and the aida software? thanks in advance
You mean all those 3 screens from TurzX? They are from the same brand, just having different sizes and different shapes. There is no significant difference between having the cable connected to the display and having the cable separate. None of those screens can use AIDA64, they all use proprietary software.
Nice video, Is there anyway you can display NZXT cam on that IPS screen?. Or do you have to use Aida-64?. I'm looking at purchasing one of these devices myself.
Unfortunately, that´s not possible. This screen will only work with the provided software (Not AIDA64). It´s not a HDMI screen, but connected via USB-C connector, so it does not act as an external screen.
I am trying to find out how to play videos on this device, but I am having a hard time (round 2.1" device). I have gotten them to work in two ways. 1. Load as a background image. This works but you hvae to select a theme, and there is no blank theme. There is the text theme but I can't seem to edit it to remove the words Input Text. It would be nice if there were some actual instructions for this software. It's buggy, poorly documented and sparse. 2. Load in the Device section. This works but you cannot rotate the video. There is an "Album Flips 180" check box but it doesn't seem to do anything. I finally found that you have to rotate the GIF 90 degrees before you load it (if you want the cable facing down), so all of them need to be rotated before being saved to the internal memory depending on the orientation of the unit.. Fantastic hardware but the software is pretty bad. Really needs some refining.
Agree about the software being quite bad, expecially compared to hardware. I wish someone would release a third party software to controll those screens, that would be great.
nice video. I wonder if the world animation is included in that program. I mean did you create the animation which world turns around or it's one of the theme? I would like to but either the 2.1 inch or 5 inch but could not decide which one is better for my system. I have a NZXT 52 water cooling system but the screen goes off. RGB leds do not respond to its program. Which one is better? 2.1 or 5? Thank you
Thank you. Yes, that video is included. You can download the application and try it even without having the display. As for which one to get, both the round one and big one are very similar, it depends on which one fits your case better.
@@upir_upir Thanks for the info. I have NZXT Kraken X 52 and the round display freezes all the time. SOmetimes it does not light up and sometimes it lights up but freezes. The 2.1 round display is fine but expensive than 5 inch display. According to you which one is more usefull? I can stick the round display on nzxt pump but original size is 80 mm and the 21. has 74 mm. I can not decie which fits better. I have a large case. Which one you offer most? Thank you
@@aslanbehar2671 I like the round one more because it´s more unusual. It also includes an SD card to fit more/longer videos. Plus you can use it to also show analog clocks which I think looks great.
@@upir_upir thanks a lot . The one I found on Aliexpress is same but in black color. But I did not see any sd card slot on it. It only says that there is 128 mb internal memory. ı do not know if it is ok for playing videos. I asked the seller about the sd card
@@upir_upir my brother bought 1 of those and I am plannig to buy one after buying a 250 dollar aio (in my country). Shit's expensive , especially in context to where I live.
You can always try to run some online anti-virus scan. I did it, and it found nothing. You cannot be obviously 100% sure, but I don´t think it´s a security issue. If you have the smallest display, there are some community-made python script that you can use, and you don´t need to use the provided software.
Hi. a great informative video thank you but i was wondering if one could put a switch inline some where and switch between 2 small vids in the round 2.1 inch screen version? thank you for all your help, take care and ahve a great day!
Thank you for your comment, but I´m not aware of a way how to switch between different videos, also because there is no touchscreen, so it would have to be somehow tied to some values?
Hi, thanks for getting back to me, what kind of values are you on about? values in resistors on the board or in the video/program? when i get mine ill find out a bit more and let you know if i can. thank you for that information take care and have a great day!@@upir_upir
Hi sorry i forgot to ask aswell, does this produce sound? how would you get sound to link up with the video if it doesent? would it or does it go through the usb lead to a spearker etc? take care. @@upir_upir
You cannot use AIDA64 with Turzx screens, those only work with the provided software. They are not true external screens, as they do not have the HDMI connection.
Hello, I just bought a 5-inch, the page says that they upload themes continuously, but on the website there is only a link to the program to download, do you know how to add themes?
Please see my other tutorials how to create themes, but I´m worried that you only get the ones with the software, I don´t know if you can download more from the official website.
@@upir_upir it displays the default theme but I would like for a certain theme to come come on when I boot the computer up is there any way to do that?
After a windows update, my 3.5 not detected by te apps. Suspect usb driver has gone wrong. Uninstalled driver but it keep reinstalled automatically from the system. can anybody help me how to remove completely usb driver?
hello, first of all such a nice and informative video. Second, can i use this system to convert an aold tablet into a system panel without doing much tampering
Thank you for your comment, but unfortunately what you plan is not possible with this display/software. You can convert old tablet into a system panel, but you need to use a different software.
Unfotunately not with the same displays. You can connect only one display of a kind - so one small, one big, and one round. Maybe they will fix this in the next version of the display..
i have turzx turing display for months now , but mod is limited coz language barrier is there any place to download theme ( .turtheme ) files? i love these screens!
I believe they are adding the option to download new themes from the application itself- at least the menu option was there on the latest beta release, but it wasn’t working yet. What kind of theme are you looking for?
@@upir_upir that good to know , i just love theming my pc , currently using their ready made theme and working with it. anything will do , for now tho , anything futuristic/cyberpunky
@@upir_upir where i can download the drivers? i have win 11 all update, but on the device list i never see the screen, even if the pc make the sound when i connect it and it turn on, i really not uderstand
Thanks for the review just received mine in the mail too. Do you know if you can fully rotate the displays? (0, 90, 180 ,270) for the 2.1 inch and 5 inch?
You are welcome. Yes, you can rotate all the displays. In the case of 5inch, you can rotate it by 0 or 180 degrees for both vertical and horizontall orientation. You can rotate the round one by 90° increments since the width is the same as height and there is no differentiation between vertical and horizontal layout.
whenever i start my PC the round screen 2.1 that I got always start at the default screen showing turzx? do you really need to run the app when you get to desktop?
If the display photo looks the same, it´s most likely the same display and you can use the software. I know that many times, the name "Turzx" is not listed, and sometime you might even find an information that it could be used with AIDA64. I guess the translation is not always right.
can you do a video on how to customize the the 8.8" display? how much memory comes in the display and how big of an SD card should I use, I feel like 32gb is overkill for this, can I just use a 1,2, or 4 GB card? I just got the 8.8 and installed it and I am just playing around with the themes but haven't tried to customize anything yet, also the screen will not turn off when I put the PC in sleep mode, I guess it is a bug ,do you know of any fix besides using python which is not yet available for the 8.8 yet I think. some of the included themes I would just like to change the colors and maybe the video is that possible?
@@upir_upir I have just been playing with it I got one metric for the CPU Temp working on my own theme but not sure how to set the background. The thing is acting really strange with sleep though. At first the screen would stay on in sleep then it started going to sleep and waking with the PC, then I had to change the shutdown color setting for my Corsair vengeance ram in signal RGB and after I did that when I went to manually put it to sleep it would wake up again after all my RGB flashing between MB and signal RGB effects. So I tried to stop the display and then end task on turzx before putting it to sleep and now the PC will go to sleep and all the RGB goes off but now the screen stays on again. Software seems really buggy. So have you had any pro with the 8.8 staying on in sleep or shut down?
Unfortunately not. All the other screens support video playback, but not the smallest 3.5" screen. That one is quite limited in many other ways, compared to the other screens.
Thanks ...I've owned the 5 inch model & the download never worked. I tried the link you provided & it asks the same. What app do I open the download with?
It´s not about the displays or the software, but also about how the system reports those data. It will never be 100% accurate, but I haven´t seen anything highly unusual.
So the software is ony good for these screens? I turned my old android in to a 2nd monitor for the purpose of using it as a touchscreen system monitor. I can't fund any free software to use for it though near as I can tell you have to buy AIDIA64 and that sucks.
It cannot act as a normal external display- you can only use it with a dedicated application, and that’s at least for now unfortunately only for PC. For the small display, there are some Python scripts for other OSes, but not for the bigger and the round one.
@@upir_upir Do you mean that if I run it with a Python script I can have it in the background on my Windows desktop? You can teach me? I am looking to leave as an alternative to aida64
Hi, i wonder how safe is this Turzx software that is mandatory to run screen? Is there any risk of virus of some theft of passwords. I am oversensitive about this kind of think :)
It´s never 100% safe to run software; no matter who the developer is, there is always a risk. That said, Google Drive runs a virus check on all the files, and it seems to be safe.
Those screens can only be used with the dedicated software that comes with the display. Someone created Python scripts for the smaller one, but not yet for the bigger ones. Another usage is that you can use it for playing video, in that case, you don´t need to use any software.
Hey. Is it possible to get data miners from this low budget software ? Usualy something that cheap and easy come at a price. Just ordered mine anyway.. Maybe its compatible with Aida64? Cheers and Thanks for the good work.
What is a "data miner"? I´m not quite sure I understand what you are asking for.. As for the other questions, it is not compatible with AIDA64. It´s still a good display though.
@@upir_upir i mean with data miner, by hiden scripts using cpu to simply mine data for profit, or just stealing the user data, like passwords and other information
@@upir_upir I got this fixed. I was on the wrong web page as there is 2 for this screen both in Chinese pus I was trying to add drivers for a 3.5 inch when it was a 5 inch. The wife always said I had a problem with size lol
@@upir_upir well i managed to get my 32GB SD Card work. Turns out it auto format it to GPT. Need to manually change it MBR through the software. Now i can store larger video files.
@@firdausbhari I tried formatting through the Genius software they provided. Still unable to get the microSD to detect. Did you format to FAT32 as shown in the instructions? Thanks!
You can edit the provided ones, create new ones, download new ones. I believe at some point, there should be a "markerplace" where you can even buy new themes? I have seen some unused buttons in the software for that.
No. The default software for the 3.5 inch display is quite limited. But there are Python scripts that you can use and probably get this information- assuming you are somewhat familiar with Python.
No, I don't know Python. I saw on GitHub that a small community has formed around this project, but everyone uses the same data, and customization is just changing the background. It's a bit disappointing. Yes, I know - I can learn Python and do it myself.
@mckwacz268 I do plan to look at this scripts closely in my future video and try to create custom theme, but my Python knowledge is quite limited. We will see…
Unfortunately not, the Turzx software is only compatible with Turzx screens, not with HDMI screens. For that, you would need something like the AIDA64.
It´s called "motherboard USB cable", and you can get it from AliExpress for example here: s.click.aliexpress.com/e/_Ddr4nmH s.click.aliexpress.com/e/_DBmGXuv That said, the cable is included for both the 5inch and round screen. It´s not included (at least it was not included in my order) with the 3.5inch screen. Let me know if that helps.
I don´t think I see the whole comment, as it end mid sentence. What is the problem with using both? I can use both of them at the same time without any problems.
@@upir_upir The message was cut off. But, I managed to run two screens, you have to open the program for screen 5.0 and then run screen 2.1 for both to work.
Thank you for your video, you helped me so much. Well I'll plan to buy the 3,5 inch, could you please tell me, I'm so curious, what are the disadvantages of the 3.5 inch compared to the 5 inch other than size, I heard the 5 inch much better than that one. +1 sub and like from Indonesia my friend.
Thank you for your comment. The screen quality is great for the small one, but the provided software is very limited compared to the bigger versions. You cannot play the background video and creating the themes is very limited - for example you can only set one font. Try watching my other videos about the Turzx screens to get a sense of what´s available. You can also download all the software and try it on your own before buying the displays. Hope that helps!
The provided software only works with Windows, but you can try the unofficial python scripts and those should work with Linux too - github.com/mathoudebine/turing-smart-screen-python
Thank you so much for the vid, I've been frustrated trying to figure out how to set a video for the 3.5 inch, I guess you stupidly can't. shouldn't be a different UI for every screen honestly. extra unnecessary work just to make the smaller screen worse quality.
You are welcome. Indeed you cannot play video on the 3.5” screen, but it’s not because it uses a different software. This is a limitation of the chip used in the screen, it’s simply not powerful enough to play videos.
@@upir_upir ah okay well that sucks, I custom 3D modeled a whole 3D print for a Fallout terminal for it to go into and not I have to redesign it for 5”
I don´t know if there is a proper name, but if you simply search for "motherboard to usb cable", you should find what you are looking for. Also, for Turzx displays, those cables are already included.
Do you like the video? Please consider buying me a coffee ☕, thank you! www.buymeacoffee.com/upir
This is awesome! Better than the two cables HDMI AIDA thing. So simple!
I´m glad you like it!
I use the rectangular black one
Very simple to use and customize
(Tip : if you have some problems at starting, you have to put a delay at the device starting - in setting software)
Thank your for your comment, do you have some custom PC case in which you have the display?
@@upir_upir Hi, no my Pc is not custom, it’ s a full BeQuiet! (Pure base 550 FX + Pure loop 2 FX 360 + Pure power 12M 850w) + AMD Ryzen 7 5800x + Rx 7800 XT …… 😇
The display is in the case, behind the glass, and show me for CPU GPU SSD RAM the % of use and the temperature
I have also on this display 2 graph for up and download
It’ s plug directly on the USB Motherboard
I was unsure if it was possible to add new sensors, as I needed the fan sensor.
Thanks to your video I discovered that it is possible.
Thank you very much and congratulations for the video
I´m glad it was helpful, thank you for your comment!
I've been looking into these, but to be honest, I'm not thrilled about installing software from some janky, no name, Chinese company. I just want the screen.
You can still use them the play video, and in that case, you don´t need that software, but obviously that usage is quite limiting. Another option is to use a third-party open source python scripts, but those are currently only for the small display, not for the big one or the round one. Hopefully someone will update those scripts for the other displays as well... otherwise, the display (display panel) quality is great.
How can I use it to just display what's on the SD card? Also, would happen to know how to use the Python scripts? I tried, but it was confusing 😅
Like the bigger brand softwares are any better lmao.
Heh. All your items including underwears are made in China
What about the 8.8" one that has the SD slot does that also use turzx software
Quality content and I really like your style of presentation! Glad I found you.
Thank you, Greg! I´m glad you found my channel.
I found this video after the other comments you replied too :)
Very helpful but I bought the 3.5.. realises it and ordered the 5 inch one as well so I got both coming but I will be using the 5inch and giving the 3.5 to a friend.
The only thing I am not sure on is the cable length. I hope it’s long enough
I got the software ready and then I’ll load and set them up. I’ve got an 8GB micro SD card to plug in.
I will test how it effects FPS/ performance on my system when I get a chance on its arrival :)
I love how you check the system and software. I’ve gone into my firewall and restricted the app from connecting to the internet completely so it’s local only. Just to be sure!
Thank you for your comment. I agree that the 5 inch is much better compared to the smaller one. That said, I´m sure your friend will still be very happy :) The cable is not so long, but you can use any other usb-C cable instead.
@@upir_upir I am going to try and see if I can setup the screen as a sim hub first… maybe? Unsure but be good to see. Just take a look a sim hub screen and you see it’s a usb screen so I will see. If not which I doubt then he can have it :)
Yes, it works with sim hub without any problems so when my 5” arrives they will be on monitoring and my 3.5” is being used with my wheel as a dial etc for racing and it works super easy being supported :)
Я тебя люблю чувак! Ты и твои идеи это круто из за тебя появилась тяга к электронике! I love you and what you do!)
Thank you for your comment, even when I had to use Google translate. Good luck with your projects!
Just in time for dinner!
Damn, 2 uploads in a week ♥️
You are welcome, and enjoy your dinner!
Please go more into detail about the alternate software for the 3.5 inch screen please
Yep, that´s on my todo list. Thank you for your comment!
all your tutorial very helpful for custom my theme .im surprise for it live reading so accurate ..for who want fps counter download msi afterburner
Thank you, I’m glad you like it!
Hi!) My screen not working, 3.5 inch:((.. Please tell me, in the device manager in the port parameters, how many bits per second, how many data bits, is there parity and what flow control?
Looks interesting might gonna pick it up for a project
My idea is to use it as a display for sim rigs I know there are plenty of products already for that but expensive like hell
Thank you, but for your case, you would probably need an external monitor. This one is purely for displaying statistics. Other option is to use the Python scripts, but those are for now only for the smaller screen. Anyway, good luck with your project!
@@upir_upir you are more then welcome are there any recommendations around similar sized displays like the ones you shown off ? That are also in that quality?
And by chance to you know when Python script compatibility comes to the bigger ones ?
is the software compatible with linux? (specifically mint, since that's what i'm using), was just wondering before i decide to buy one and i couldnt find an answer anywhere
The only display tha you can use with Linux is the smallest one (3.5"), with Python scripts, not with the official software. The official software only supports Windows. Hope that was helpful.
i see, thank you
@duskthesnep your are welcome!
@@upir_upir do you have a link to python scripts - i think it might be better to run these than the packaged software for security reasons - thanks
Thing is, it's only being use by they monitor. Can't connect by your own phone
That’s right, it’s mentioned in the video several times.
Thanks for the video
I see you access the FPS data.😮
Do you use a beta version ?
Thank you! The FPS is present in the "normal" version for round display, and for the beta version for the 5inch display. I haven´t tested it yet though.
Thank you for posting this video 📹. You have a new subscriber. Keep up the great 👍 🎉work..
You are welcome and thank you for the sub. Are you using any of those screens?
Is it possible to display my gif images on this screen? My English is bad and I understood almost nothing from the video.
Yes, you can use any GIF file.
Love these and the theme editors, especially for newbies. Are the touchscreen versions able to be programmed to function as trackers? Or what could you recommend please? Looking to create a simple tracker with touchscreen lcd (and possibly knob) where users would just tap an up/down button (logical or physical) to change the score/tracker. Thanks much!
Thank you for your comment. There are no touchscreen versions available as of right now, as those are meant to be installed inside the PC case, where you don´t touch those. What do you mean by "tracker"?
@@upir_upir thanks for the note back! Noticed Waveshare has several touch display modules on their site available (e.g., SKU: 24321).
As for trackers, looking to build a simple score type of tracker where the output value is set by the end-user. For example - smart watches have a functionality to keep track of the number of glasses of water are consumed each day so the user would just interact with this tracker’s on-screen or buttons or knobs to increase the number of glasses consumed each time throughout the day. Very simple “tracking” system so wondering what all I can use to create something simple like this? Thanks again!
@cyberc0l0mbiana probably the simplest way how to do something like this is to use “intelligent” displays. The easiest one to use is Nextion, I have a few tutorials here on this channel. Usually you use those with other microcontroller like Arduino, but for this simple usage, the Nextion display alone should be sufficient. Just choose your preferred size and your should be good to go. Let me know if you have any questions and good luck with your project.
@@upir_upirthanks so much for your time and response. Also found the Lilygo T-Touch S3 Pro which is almost perfect as I wouldn’t have to figure out how to power it etc.. and it’d be quick for a prototype I need but doesn’t use a theme editor. Have you tried this particular device before? Wondering if knowledge of C++ or if any other coding/programming languages are required to make the best use for it as I need to hire a programmer to create a major project for me. Thank you again!
@@cyberc0l0mbiana Lilygo screens are great, but again, if you are looking for something simple that you don´t need to write code for, Nextion screen will be very easy to setup and get running.
There is a way to let them turn off correctly after my pc shutdown? Because somethimes they are still on, but I dont want to enable deep sleep.
I don´t think that is related to the display, but rather your PC configuration. It seems like (some) USB ports are still on after the shutdown - that might be intentional. Perhaps use a different USB port or try to configure it to turn off? I´m sure google will know more about that.
Friend, good morning!!! I have a 3.5 display similar to yours that is connected to the PC via a USB C cable. This week I bought an Acegeek watercooler that has a display with the temperature on the pump itself, however when installing the program to work the display the 3.5 screen remains white. I checked in the root of the driver that they are the same and I think that for this reason one cannot project the image (generally the 3.5" screen). The watercooler is connected to USB directly on the motherboard (like this round video screen) What can I do? Could you help me?
Can you try running those python scripts instead of the provided application? That might help.
Hi, can I run the round 2.1 inch screen without the software? Like I just set a certain gif or video once and it will always play it without the software.
Thanks
Sure, you can do that. If you only want to play the video on loop, you don´t need to run the software. That´s true for all the screens except for the smallest one.
The displays are really looking nice. I am wondering whether they could be used with Arduino?
Probably not. You still need to send some graphical data to the display, and Arduino simply does not have enough power. You can get it working with other microcontrollers, like Raspberry PI - github.com/mathoudebine/turing-smart-screen-python
@@upir_upir Many thanks!
@@upir_upir I think issue with Arduino is more lack of a USB host port, not the data rate as the serial port speed is only 115200bps. Maybe an esp32s3 or rp2040 running Micropython perhaps?
@@jonathanpeace3167 Well, with enough speed you can simulate anything, but Arduino is just slow for those tasks.
So these don’t work with just hdmi video pass through? Like a regular monitor..?
That´s correct, there is no HDMI port for those screens, you can only use them with the dedicated software.
Hello nice video ; D btw I have a question and I dont know if u can solve my doubt but what is the diference about the turzx screen 2.1 and the other who have the separate cables, there are differences about the quality of display or something more apart from the removable cables and the aida software? thanks in advance
You mean all those 3 screens from TurzX? They are from the same brand, just having different sizes and different shapes. There is no significant difference between having the cable connected to the display and having the cable separate. None of those screens can use AIDA64, they all use proprietary software.
Do you have to keep running the software in the background to make the screen work?
In order to display and update the readings - yes. If you only want to play background video / photo slideshow, than no.
@@upir_upir and how much cpu and ram does that use, thanks for the reply
Nice video, Is there anyway you can display NZXT cam on that IPS screen?. Or do you have to use Aida-64?. I'm looking at purchasing one of these devices myself.
Unfortunately, that´s not possible. This screen will only work with the provided software (Not AIDA64). It´s not a HDMI screen, but connected via USB-C connector, so it does not act as an external screen.
Your better of just using an old tablet with space desk software this way you can use aida 64
can it be used with rainmeter perhaps ?
Unfortunately not. This display can only be used with a custom software.
I am trying to find out how to play videos on this device, but I am having a hard time (round 2.1" device).
I have gotten them to work in two ways.
1. Load as a background image. This works but you hvae to select a theme, and there is no blank theme. There is the text theme but I can't seem to edit it to remove the words Input Text. It would be nice if there were some actual instructions for this software. It's buggy, poorly documented and sparse.
2. Load in the Device section. This works but you cannot rotate the video. There is an "Album Flips 180" check box but it doesn't seem to do anything.
I finally found that you have to rotate the GIF 90 degrees before you load it (if you want the cable facing down), so all of them need to be rotated before being saved to the internal memory depending on the orientation of the unit..
Fantastic hardware but the software is pretty bad. Really needs some refining.
Agree about the software being quite bad, expecially compared to hardware. I wish someone would release a third party software to controll those screens, that would be great.
@@upir_upir I wonder if it woild work with aida64?
nice video. I wonder if the world animation is included in that program. I mean did you create the animation which world turns around or it's one of the theme? I would like to but either the 2.1 inch or 5 inch but could not decide which one is better for my system. I have a NZXT 52 water cooling system but the screen goes off. RGB leds do not respond to its program. Which one is better? 2.1 or 5? Thank you
Thank you. Yes, that video is included. You can download the application and try it even without having the display. As for which one to get, both the round one and big one are very similar, it depends on which one fits your case better.
@@upir_upir Thanks for the info. I have NZXT Kraken X 52 and the round display freezes all the time. SOmetimes it does not light up and sometimes it lights up but freezes. The 2.1 round display is fine but expensive than 5 inch display. According to you which one is more usefull? I can stick the round display on nzxt pump but original size is 80 mm and the 21. has 74 mm. I can not decie which fits better. I have a large case. Which one you offer most? Thank you
@@upir_upir I can also stick the 5 inch display on the pump near ram slots and it will fit fine as well.
@@aslanbehar2671 I like the round one more because it´s more unusual. It also includes an SD card to fit more/longer videos. Plus you can use it to also show analog clocks which I think looks great.
@@upir_upir thanks a lot . The one I found on Aliexpress is same but in black color. But I did not see any sd card slot on it. It only says that there is 128 mb internal memory. ı do not know if it is ok for playing videos. I asked the seller about the sd card
how do you change the time format on the 3.5 screen
I’m not quite sure if you can do that. The smallest screen is very limited.
Hello, this Software looks nice... to you know which Displays are useable?
Can i use any USB-Monitor?
This software only works with Turzx screens, not any other brand.
pc displays are going to be the death of me
Why?
@@upir_upir my brother bought 1 of those and I am plannig to buy one after buying a 250 dollar aio (in my country). Shit's expensive , especially in context to where I live.
Is the software a big security issue? That's probably my biggest concern.
You can always try to run some online anti-virus scan. I did it, and it found nothing. You cannot be obviously 100% sure, but I don´t think it´s a security issue. If you have the smallest display, there are some community-made python script that you can use, and you don´t need to use the provided software.
Hi. a great informative video thank you but i was wondering if one could put a switch inline some where and switch between 2 small vids in the round 2.1 inch screen version? thank you for all your help, take care and ahve a great day!
Thank you for your comment, but I´m not aware of a way how to switch between different videos, also because there is no touchscreen, so it would have to be somehow tied to some values?
Hi, thanks for getting back to me, what kind of values are you on about? values in resistors on the board or in the video/program? when i get mine ill find out a bit more and let you know if i can. thank you for that information take care and have a great day!@@upir_upir
Hi sorry i forgot to ask aswell, does this produce sound? how would you get sound to link up with the video if it doesent? would it or does it go through the usb lead to a spearker etc? take care. @@upir_upir
Schönes informatives Video, Top 👍🏼
Kann man mit drm 5" zoll monitor trotzdem Aida64 betreiben?
Danke jetzt schon mal!
You cannot use AIDA64 with Turzx screens, those only work with the provided software. They are not true external screens, as they do not have the HDMI connection.
@@upir_upir
Ahh, ok. Jetzt habe ich es verstanden!
Danke nochmal für die Info 👍🏼
Hab trotzdem ein Turzx 5" bei Ali Baba
Bestellt!
Hello, I just bought a 5-inch, the page says that they upload themes continuously, but on the website there is only a link to the program to download, do you know how to add themes?
Please see my other tutorials how to create themes, but I´m worried that you only get the ones with the software, I don´t know if you can download more from the official website.
i cant open both programs together for 5inch and 2.1 inch, 5 is working but wont open software for 2.1
Are you running both of them in the admin mode? I.e. right click > run as administrator? I can run all of them at the same time without any problems.
Yes i run them in admin mode, does a screen need to be pluged in to work on software
How can I make the lcd display come on when I turn my pc on? Or do I have to go a choose one every time I log in?
I´m sorry but I don´t understand the question. The display will turn on as soon as you provide power to it. Did you mean something else?
@@upir_upir it displays the default theme but I would like for a certain theme to come come on when I boot the computer up is there any way to do that?
And a certain video
Very nice video, Can you tell if 3.5 inch display can show game fps?
Thank you. The smaller screen is quite limited, I don’t believe it can show FPS.
can i use the round display on an air cooled PC? also can i make it play like an animated video?
Yes, you can use it with air cooled PC, and you can play animated videos.
@@upir_upir thank you!
I wonder how the longevity of those screens is..I read quite often that they stop working after a few months..Anyone any long term usage opinion?^^
I have them for a year and they are still running fine.
After a windows update, my 3.5 not detected by te apps. Suspect usb driver has gone wrong. Uninstalled driver but it keep reinstalled automatically from the system.
can anybody help me how to remove completely usb driver?
I´m sorry to hear that, but I don´t have any experience with that.
my friend do the screens go to black screens randomly as the time pass?
I don´t see such issues.
@@upir_upir thank you
hello, first of all such a nice and informative video. Second, can i use this system to convert an aold tablet into a system panel without doing much tampering
Thank you for your comment, but unfortunately what you plan is not possible with this display/software. You can convert old tablet into a system panel, but you need to use a different software.
you gave me an idea... what if I use 2 of the same display.. will it work?
Unfotunately not with the same displays. You can connect only one display of a kind - so one small, one big, and one round. Maybe they will fix this in the next version of the display..
i have turzx turing display for months now , but mod is limited coz language barrier
is there any place to download theme ( .turtheme ) files?
i love these screens!
I believe they are adding the option to download new themes from the application itself- at least the menu option was there on the latest beta release, but it wasn’t working yet. What kind of theme are you looking for?
@@upir_upir that good to know , i just love theming my pc , currently using their ready made theme and working with it. anything will do , for now tho , anything futuristic/cyberpunky
I have a 3.5 screen bought on Amazon but it not work. When i clyck run on the software it says is not conneted. How i can solve?
Can you try to install the drivers first?
@@upir_upir i not find them any where. And on the device list it not appear
@@upir_upir where i can download the drivers? i have win 11 all update, but on the device list i never see the screen, even if the pc make the sound when i connect it and it turn on, i really not uderstand
mine doesn’t work :( it’s locked in the turzx screen and when i connect the usb it just makes a bunch of sounds :(
Sounds like a faulty one. I´m sure the shop should be able to send you a new one..
great video but i have the 3,5 inch screen (turing smart screen) and says "device not connected" in any usb i connected. any help if you want plz?
Thank you. What version of Windows are you using? There are some Win7 drivers in the software folder, perhaps you can try to install those?
@@upir_upir im using Windows10 64bit and when i connect it i have white screen. in any usb port
Doesn't work with Windows 11 "Device Not Connected"
Have you tried installing the drivers?
@@upir_upir Yeah. That's why this device gets 2 out of 5 stars. Most can't get it to work with the Chinese drivers.
Thanks for the review just received mine in the mail too. Do you know if you can fully rotate the displays? (0, 90, 180 ,270) for the 2.1 inch and 5 inch?
You are welcome. Yes, you can rotate all the displays. In the case of 5inch, you can rotate it by 0 or 180 degrees for both vertical and horizontall orientation. You can rotate the round one by 90° increments since the width is the same as height and there is no differentiation between vertical and horizontal layout.
whenever i start my PC the round screen 2.1 that I got always start at the default screen showing turzx? do you really need to run the app when you get to desktop?
Yes, the app should be running all the time. The only exception is when you only want to play video.
Does the TURZX app work with any screen or it has to be a specific screen ? There is so many on amazon they all look the same will any work ?
If the display photo looks the same, it´s most likely the same display and you can use the software. I know that many times, the name "Turzx" is not listed, and sometime you might even find an information that it could be used with AIDA64. I guess the translation is not always right.
Can you make a "how to" video for the 3.5" using python. Found it in github but having problems getting it to work. Thanks
Yes, that´s on my to-do list..
can you do a video on how to customize the the 8.8" display?
how much memory comes in the display and how big of an SD card should I use, I feel like 32gb is overkill for this, can I just use a 1,2, or 4 GB card?
I just got the 8.8 and installed it and I am just playing around with the themes but haven't tried to customize anything yet, also the screen will not turn off when I put the PC in sleep mode, I guess it is a bug ,do you know of any fix besides using python which is not yet available for the 8.8 yet I think.
some of the included themes I would just like to change the colors and maybe the video is that possible?
Yep, I do have that 8.8" display for a while, I might as well record a video. Let me see what´s possible.
@@upir_upir great thank you !
You are welcome!
@@upir_upir I have just been playing with it
I got one metric for the CPU Temp working on my own theme but not sure how to set the background.
The thing is acting really strange with sleep though.
At first the screen would stay on in sleep then it started going to sleep and waking with the PC, then I had to change the shutdown color setting for my Corsair vengeance ram in signal RGB and after I did that when I went to manually put it to sleep it would wake up again after all my RGB flashing between MB and signal RGB effects.
So I tried to stop the display and then end task on turzx before putting it to sleep and now the PC will go to sleep and all the RGB goes off but now the screen stays on again.
Software seems really buggy.
So have you had any pro with the 8.8 staying on in sleep or shut down?
Is the 3.5 inch capable of putting video in the background? If yes, could you make a video teaching this? pls
Unfortunately not, the smallest display cannot play video, only the bigger one and the round one.
Thanks for the video, can I play videos on the 3.5 screen? Thanks
Unfortunately not. All the other screens support video playback, but not the smallest 3.5" screen. That one is quite limited in many other ways, compared to the other screens.
@@upir_upir Thank you
You are welcome!
Thanks ...I've owned the 5 inch model & the download never worked. I tried the link you provided & it asks the same.
What app do I open the download with?
Try 7zip, it´s free and it should work to unpack the archieve. Hope this helps!
did you test if these displays are displaying accurate info because i saw many people complaining about that
It´s not about the displays or the software, but also about how the system reports those data. It will never be 100% accurate, but I haven´t seen anything highly unusual.
So the software is ony good for these screens? I turned my old android in to a 2nd monitor for the purpose of using it as a touchscreen system monitor. I can't fund any free software to use for it though near as I can tell you have to buy AIDIA64 and that sucks.
That’s correct, you can use the software only with this particular screen. For external monitor, you need to use Aida64 or some other application.
Which Display do you recommend for AIDA64?
Any display should do the trick. Surely I would look for either IPS or OLED display, but the size and dimensions depends on your needs.
Great i need this monitor! Just want to ask are these support to display for windows/MacOS, i mean can it work like an normal PC monitor? Thank you.
It cannot act as a normal external display- you can only use it with a dedicated application, and that’s at least for now unfortunately only for PC. For the small display, there are some Python scripts for other OSes, but not for the bigger and the round one.
@@upir_upir Do you mean that if I run it with a Python script I can have it in the background on my Windows desktop? You can teach me? I am looking to leave as an alternative to aida64
@@33pl No. The Python script is just a replacement for the provided software. It will still not act as an external screen.
I have an 8.8 screen and it works on HDMI. Can I operate it with this program?
Not if that´s the HDMI screen. You need to have the 8.8 Turzx screen, that one only has the USB-C connection.
With the round screen, can you display animated gifs? I mean, without text or specs
Yes, you can.
Hi bro, how uninstall Turzx Turing Smart Screen? (version this video)
The Windows "Add or remove programs" should do the trick.
@@upir_upir thanks
Hi, i wonder how safe is this Turzx software that is mandatory to run screen? Is there any risk of virus of some theft of passwords. I am oversensitive about this kind of think :)
It´s never 100% safe to run software; no matter who the developer is, there is always a risk. That said, Google Drive runs a virus check on all the files, and it seems to be safe.
I can use it as a second screen, or with Wallpaper Engine or AIDA64?
Those screens can only be used with the dedicated software that comes with the display. Someone created Python scripts for the smaller one, but not yet for the bigger ones. Another usage is that you can use it for playing video, in that case, you don´t need to use any software.
Hey.
Is it possible to get data miners from this low budget software ?
Usualy something that cheap and easy come at a price.
Just ordered mine anyway..
Maybe its compatible with Aida64?
Cheers and Thanks for the good work.
What is a "data miner"? I´m not quite sure I understand what you are asking for.. As for the other questions, it is not compatible with AIDA64. It´s still a good display though.
@@upir_upir i mean with data miner, by hiden scripts using cpu to simply mine data for profit, or just stealing the user data, like passwords and other information
I have one of these smart screens but when I click run all I get s devise not connected but it is
Could you try a different USB port? Install the drivers first? Or reinstall drivers if you have installed those already?
@@upir_upir I got this fixed. I was on the wrong web page as there is 2 for this screen both in Chinese pus I was trying to add drivers for a 3.5 inch when it was a 5 inch. The wife always said I had a problem with size lol
Windows 11 when clicking run it says no device detected! Any help? 5” screen turzx
Unfortunatelly no idea. Different USB cable? Install/update the drivers? There are some drivers in the .zip file with the app.
Recently I have had to run the executable every time I restart the PC. Any idea why?
I´m sorry, but I don´t know why. Could you perhaps try asking that question on the official Turzx forum website?
MicroSD wont detect even after formatted using their own software. Any idea whats the max microSD capacity for this device?
Since the round display comes with pre installed 128MB card, I would guess you probably want to get something similar..
@@upir_upir well i managed to get my 32GB SD Card work. Turns out it auto format it to GPT. Need to manually change it MBR through the software. Now i can store larger video files.
Perfect, that’s great to hear!
@Rod EM tested with 256GB & its working as well. but even 32GB is more than enough for such small videos
@@firdausbhari I tried formatting through the Genius software they provided. Still unable to get the microSD to detect. Did you format to FAT32 as shown in the instructions? Thanks!
Can I edit and add new themes to it? Or only use the ones available?
You can edit the provided ones, create new ones, download new ones. I believe at some point, there should be a "markerplace" where you can even buy new themes? I have seen some unused buttons in the software for that.
Can video be played on a 3.5 screen?
No. The 3.5" screen is the only one that does not support video playback, all the other sizes do support video.
Are there themes available for 3.5" that display power consumption in watts or fan speed?
No. The default software for the 3.5 inch display is quite limited. But there are Python scripts that you can use and probably get this information- assuming you are somewhat familiar with Python.
No, I don't know Python. I saw on GitHub that a small community has formed around this project, but everyone uses the same data, and customization is just changing the background. It's a bit disappointing. Yes, I know - I can learn Python and do it myself.
@mckwacz268 I do plan to look at this scripts closely in my future video and try to create custom theme, but my Python knowledge is quite limited. We will see…
So can you not use this software with a hdmi mini screen?
Unfortunately not, the Turzx software is only compatible with Turzx screens, not with HDMI screens. For that, you would need something like the AIDA64.
Whats the CPU usage like? i know alot of people have had issues with high usage.
Not much. The video is handled on the display, so it’s just updating the graphics once in a second. I can measure it next time.
Does the screen come with that cable that goes directly to the board? If not what is it called and how do I get one?
It´s called "motherboard USB cable", and you can get it from AliExpress for example here:
s.click.aliexpress.com/e/_Ddr4nmH
s.click.aliexpress.com/e/_DBmGXuv
That said, the cable is included for both the 5inch and round screen. It´s not included (at least it was not included in my order) with the 3.5inch screen. Let me know if that helps.
@@upir_upir Thanks for the reply. Yeah the cable that goes directly to USB on the MB to the pins on the screen is the one I figured I use.
Very useful....cheers.
Thank you! :)
I have a 5 screen and a 2.1 screen, is there a way for them to work together? because when one calls another to
I don´t think I see the whole comment, as it end mid sentence. What is the problem with using both? I can use both of them at the same time without any problems.
@@upir_upir The message was cut off. But, I managed to run two screens, you have to open the program for screen 5.0 and then run screen 2.1 for both to work.
@@newghost5339 Good to hear that you were able to get it working. Yes, unfortunately you need to run both applications at the same time.
Can any of this displays run gif animation? And which one?
Yes, the round one and the big one. Only the smallest one cannot display animations.
do you have a preset for download a 3.5 inch i cant log in to aida forum thanks
Unfortunately I don´t, but I believe the software includes some pre-defined presets that you can use as a starting point.
it was great ❤
Thank you!
Thank you for your video, you helped me so much. Well I'll plan to buy the 3,5 inch, could you please tell me, I'm so curious, what are the disadvantages of the 3.5 inch compared to the 5 inch other than size, I heard the 5 inch much better than that one. +1 sub and like from Indonesia my friend.
Thank you for your comment. The screen quality is great for the small one, but the provided software is very limited compared to the bigger versions. You cannot play the background video and creating the themes is very limited - for example you can only set one font. Try watching my other videos about the Turzx screens to get a sense of what´s available. You can also download all the software and try it on your own before buying the displays. Hope that helps!
Hello, i can't get the NETWORK USAGE data, it just keeps locked on ''99 VOL used'' and ''0.0 Upload'' and ''0.0 download''. Can you help me?
I´m sorry, it was working for me just fine. Could you perhaps check the dedicated forum on the turzx website?
Switch the network card monitoring location in the software settings options
@@turzx1 ty!
Does Round Screen 2.1inch match with ID Cooling Zoom Flow Pump ?
What do you mean by that? You mean the size?
@@upir_upiryes i have the same aio, will this perfectly fit
Will this work with Linux? It’s can be nice addition for my DIY Linux NAS
The provided software only works with Windows, but you can try the unofficial python scripts and those should work with Linux too - github.com/mathoudebine/turing-smart-screen-python
Thank you so much for the vid, I've been frustrated trying to figure out how to set a video for the 3.5 inch, I guess you stupidly can't. shouldn't be a different UI for every screen honestly. extra unnecessary work just to make the smaller screen worse quality.
You are welcome. Indeed you cannot play video on the 3.5” screen, but it’s not because it uses a different software. This is a limitation of the chip used in the screen, it’s simply not powerful enough to play videos.
@@upir_upir ah okay well that sucks, I custom 3D modeled a whole 3D print for a Fallout terminal for it to go into and not I have to redesign it for 5”
Quick question can you put custom videos/images in the round stat monitor ??
Yes, you can do that in the very same way as with the larger screen.
norton flags the website for the software as malicious..
There are links to download the software from google drive, and google automatically scans all the executables for viruses...
Can use aida 64 ?
Unfortunately not with those screens, you can only use the provided software.
What is the name of that cable in 2:44?
I don´t know if there is a proper name, but if you simply search for "motherboard to usb cable", you should find what you are looking for. Also, for Turzx displays, those cables are already included.
Is this for the raspberry pi ? Or just running through windows , mines setup using the pi at the min
You can use the small one with PI, but not the big ones (yet). Only Windows for now.
not true theres another screen which is an 8.8 inch wide screen
True, but that one was not available at the time of the recording of this video...
@@upir_upir ahh ok but anyway your video is a nice and clear tutorial thanks
if you wanted to use one of these with aida could you?
Unfortunately not. AIDA64 could be used with external screen, and this is not a proper external display, since it´s not connected via HDMI.
when i try to download it, it keeps downloading as "rar" how do i fix that?
That’s correct. Rar is a compressed folder similar to zip file. You need some application to extract it first, for example 7zip. It’s free.
oh okay thank you.@@upir_upir
My 3.5in is disconnecting randomly. Anyone else having this issue?
I would suggest the official Turzx forum, maybe there is an answer there?
Need help plz my problem : device not connected ?! does anyone have a solution
Have you tried installing the drivers first? They should be in the same folder as the software.
Can I add a speedometer in the round screen?
You mean for your PC or for something totaly unrelated like a motorbike?
@@upir_upir for my pc, using this round ips display.