Це відео не доступне.
Перепрошуємо.
Simple Clamping Jig with Plywood & Bolt [woodworks]
Вставка
- Опубліковано 19 сер 2024
- Hello, this is Dekay.
Today I have made an clamping jig that can be used to aggregate woods to make cutting boards. enjoy the video.
Please leave a comment, subscribe and like it. it will be a lot of help. =)
▷E-mail : dekayking@gmil.com
I finally made this jig a year ago and it works fantastic! The only change I made is the use of melamine on the top surface. The glue comes right off and I'm not wasting so much tape and having it end up in a landfill. Thanks, Dekay!
thank you for sharing. that was the best version of a clamping system like this that I have seen. you can change back fence. and the using the screws in the clamp feet to keep the bolts from piercing thru the wood is good idea. great job. thank you
Thank you too =)
Most sensible clamp design i ever saw.👍
another great idea and exactly something that I was looking for to solve my problem. Thanks once again
Bonjour, je viens de vous découvrir et c'est l'une des meilleures inventions personnelle et bravo. Mais ne serait-il pas encore mieux de renforcer les 4 petits bois (serrage 40mmx80mm) avec de petits rails de guidage (T-Slot) pour éviter de les voir bouger et se soulever pendant le serrage? Je vous remercie pour le partage des idées car on apprend toujours de quelqu'un dans la vie, Merci depuis Paris
Excellent
Bonjour,
Ingenieux systeme de serrage.
Cela donne des idées.
Merci pour votre travail de précision et votre partage.
Cordialement.
Max Bout la Bricole 🔨🔩👍📐🔧👏👏👏
Bonjour. Merci aussi.😉😉😉
This is one of the nicer clamping boards for gluing up cutting boards. Do you have plans for this jig?
Thank You...Great Clamp....
Thank you :-)
Gracias
Молодец! Отличная работа, хорошего настроения, удачи!
Спасибо.
Thanks for the sub-titles it helped me a lot, I am old, LOL. Keep up the great videos.
I glad to help you. Thanks =)
Спасибо за хорошее видео и идею !
Great jig. Just finished mine. I love the set screw in the blocks. I did forego the bolt patterns on the table for three t-tracks. Easily adjustable, and moves up against the fence keeping the blocks in place when storing. Looking at adding a bridge to keep the glue ups from arching up.
You have an incredible creativity, I like all your videos, thank you very much for sharing your ideas
Thank you =)
there are many variations on this design but "simple" is not the word I would use here seeing how convoluted the build is, but the end result works well.
Great project. Congratulations
Muito top parabéns pelo seu trabalho esse gabarito ficou show muito obrigado por te colocado a legenda ficou mas fácil de entender o projeto.( Brasil)
Very nice. I will build my own soon.
Thank you. I look forward to it.
Merci pour le sous titrage en français, bravo pour l'invention, c'est toujours un réel plaisir de regarder vos réalisation!
Merci beaucoup.
Nice , a very smart and simple clamping jig.
Thank you :)
Awesome thank you just what I need and I can make it 👍
Trop bien... Nice project. I like it!!!
Nice design! Very well done!
i like this smart tips 1:47
Merci pour les traductions françaises.
Très intéressant et inspirant toutes ces idées
Супер!! Молодец!! Мастерская класс!
Thanks for share with us this video.
Its so simple to do.
Merci beaucoup.
Muchas gracias por compartir tu conocimiento. Justo lo que andaba buscando para un proyecto que estoy por realizar. Saludos desde México
Muchas gracias.😀
Отличная работа! Отдельная благодарность за субтитры!
Спасибо.😃
Nicely done ahjussi...
Nice clamp. Here in California we pay $55 - $65 a sheet for plywood. For us the solution would be to just buy cheap clamps.
Cool idea 👍
Thank you :)
Красавчик!!!
Belo projeto parabéns.um abraço.
Thx =)
That a kool screw organizer
That looks great you just saved me a lot of money as I was about to go out and buy another 12 clamps which are both costly and they take up a lot of space especially during the clamp up stage 😲😁👍 By the way I love that nail and screw storage device which you showed at 1:46 😁👍
wow what a fantastic idea , thanks for sharing
Thank you too :-))
Molto ingegnoso👏👏👏👏👏bravissimo
Nice and clean job
Thank you :)
천! 재!
감사합니다 ~~
Just found your channel recently. Great videos! Suggestions for the clamping table: Several coats of polyurethane would prevent the need for packing tape for glue spills.
Also in your next project, when you drive the pin nails in, slant the nail 30 or 40 degrees. The nails won't protrude on the other side thus saving you a little time.
Anyway great job and great idea.
Thank you very much =)
Nice one Mr. Dekay.
Hai nice video with indonesian sub..
Thanks fot share, peace from indonesia.
nice! Perhaps a built in storage solution for the parts, i.e. the nuts and bolts, and those blocks? well done!
Again a very good Jig. Top
Thank you :)
Hi,
Well done.
Thanks for sharing.
Willy from Belgium.
🙏🙏🙏
Thank you too :-)
progetto molto interessante e funzionale... bravissimo very interesting and functional project ... very good
Grazie Mille.
Bonjour, très belle réalisation et excellente idée👏👏👍👍.Merci pour cette super vidéo tout en français. Je m'abonne. Norbert (France).
Merci beaucoup.😄😄
Mantap bang ide nya
Genial 😁
Gracias.😃😃
Спасибо. Очень хорошая идея.
Спасибо. :)
Merciiiiiii pour le partage de tes vidéos c est cool 😉🇧🇪
Merci beaucoup.😃
Super bonne idée merci pour le partage bravo 👏
Merci beaucoup.
Nice idea 💡💡💡💡💡 and I can use whatever Scrap I have
Thank you so much :)
Okay, I'm sold, you have yourself a new subscriber! 😍😘
Thank you !!!😊😉😀😁😄😃😆
Me gustaría ver donde guardas los tornillos muy bueno esta tendrías que hacer un vídeo de eso felicitaciones
The 3 blocks seem to be lifting up as you tighten. I couldn't tell but are the faces of the blocks cut on an angle to offset the lift ? Seems like if there were some way to "capture" those blocks in place so all of their force is directed towards the wood instead of losing some to upward movement, it would be better ? Still a nice idea.
Идея хорошая, но вот сверху прижать склеиваемые детали необходимо, т. к. деформируется склейка
Спасибо за совет. Я буду беспокоиться больше
All that to make a 1-by-6? Anyway, I'm making a panel clamping jig to make oak panels. None of that massive amount of labor was required. It's just a 24" square of plywood with small cleats on two edges. The clamping pressure is from tapping in several wedges. No big bolts, no embedded hex nuts, no gluing up piles of wood, no moving parts. Uses C-clamps to hold down glue joints.
👍👍👍
Надо себе такое сделать. Молодец!
Спасибо!
Интересное решение! Лайк.
Спасибо. :)
Ingénieux
Briliant idea! Cool work. More pls :)
Thank you :-)
Nothing 'wrong ' with this solution..... but there are simpler ways of doing this...just saying.
That's a cool pushstick...do you have a video on making that???👍👍👍
Thanks =)
Are you talking about this?
It's been a long time ago
ua-cam.com/video/6zLdB3zil_E/v-deo.html
Excelente prensa amigo muy buena opción de ajuste y precisión gracias, quisiera pedirte fabricarás un sistema de afilado de sierra de disco para Sierra de mesa, te lo agradecería, saludos. Luis de Peru
Hola Gracias.
오~~~대박
감사합니다 ^^
Relaxing Dekay?! Incredible!))
Good tool for reasonable price
Thank you :)
❤️👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙋🏻♀️🇧🇷muito obrigada pela tradução.
Exelente..!! muy bueno 👍🏻👏🏻
Muchas gracias.😄
나이스!!
감사합니다 ^^
Tipp für Nachbauer, die Schrauben kosten ein Schweine Geld, nehmt lieber eine Gewindestange das tut es auch verklebt die Mutter mit Epoxidharz.Gutes Video und mach weiter so.
Danke für einen guten Tipp.😄
Чудовий задум і виконання!
Превосходно, буду использовать Ваш опыт!
Спасибо.
Мне тоже понравилось!
Из берёзовых досок сделаю
👍 👍 👍
Молодец
Спасибо. :)
👍👍👍👍👍👍
😀😁😄😃😆
Очень даже нужная тема
밴드쏘 만드는것도 보고 싶습니다
제가 할수 있을지 모르겠어요 노력해보겠습니다 =)
Thank goodness for subtitles is all I'm saying
Молодец!
👍
Thank you 😃
Genius! Great Job!
Thank you so much :)
fantastic
Thank you :-)
Keren abis bos 👍
Terima kasih 😄
Good job regardless of what the experts and trolls say
아주 유용한 툴 이네요..
좋은영상 잘보고 갑니다.
그리고 10만 구독자 달성 축하드립니다. ^^~
감사합니다^^
Для изготовления простого зажимного приспособления нужно много НЕпростого электро инструмента.
good, congratulations for the channel
Thank you so much :)
Brilliant!
Thank you .
10만명 축하합니다~~~!!
감사합니다~!!
semplice e geniale
Grazie Mille.
How much is the cost to build one? Is it cheaper than to buy the real clamps?
Could you put the plans and measurements of the boards? Also the deep socket set you used on the bolts and nuts, where did you get that? What are the bolt dimensions?
Браво
Grande👏🏽👏🏽
역시 겨울왕국2 보다 재미있단 말이야..
^^*
ㅋㅋㅋㅋ 인호님 안녕하셨어요~~
Как ты это всё придумываешь?)))