Easy way to eliminate radio interference!
Вставка
- Опубліковано 31 жов 2019
- How I used a ferrite core to stop interference on my airplane radio. The Belite Radiant altimeter was causing tons of interference on my radio and by installing a simple ferrite core I was able to isolate and stop the noise. FYI - I do not recommend Belite Radiant products.
- Авто та транспорт
You can get a RG58 one for your external aerial cable put it close to the aerial end. Or use 2 one at each end.
An excellent explanation! This is a very simple solution to a complex problem. Thank you for posting.
Výborná teória aj opakovanie hystórie 👌
The audio quality on this video is freaking fantastic! Perhaps you could teach others how to record sound for their videos. Oh, and thanks for the info on ferrite chokes. Peace.
Thanks! I do try to create good content.
thanks for sharing
excellent
thnak you
Good video! In my plane (@KUES) I notice that if my daughter plugs in her iphone to one of the 2 usb jacks in the adapter that is in the old lighter socket (24V) I get radio interference. Do you think a core around the usb cable might do it or just replace the usb adapter jack? I noted that the other usb jack in the adapter does not create noise. Thanks.
If you can get behind the panel and put the ferrite core on the wires then you'd be better off. I don't know if putting a core on the cable would work but it would be super easy to try.
you need to change video name to how to make ferrite core as isolation for radio to make video appear in suggestion , cause it's useful one
Thanks for the suggestion, I will do that
great idea i will use with car radio
did it actually work? thanks.
@@betavirus11 yes but it will need other capacitor
my friend suggest me to wrap aluminium foil on ignition coil cable so it can’t interfere with other sensors frequency … will it work ??
You may have static coming from the engine and spark plug wiring. Be sure your engine block is grounded to the frame because rubber shock dampeners will insulate the engine from the frame. Shielding over spark plug wires is a good idea, but be sure the shielding is also grounded to the engine and frame.
Like and comment to help the channel.
Did it affect your compass?
I do not fly with a compass so I don't know for certain how it would affect one. The magnetic cores are not terribly strong so I expect very little effect on a compass outside of a 2 or 3 inch radius
I really like this video. I do have a question for you and hopefully you can help. I have a cb radio in my semi and have led headlights, everytime that I turn the headlights on I get radio interference through my cb. Will these ferrite collars help with interference and where should I install them? On the power cord or coax to antenna? Radio is wired direct to the batteries of the semi. Thanks in advance.
The ferrite core would go on the power cord to the radio. You may have current being induced on the power wires by other electrical components. Place the core as close to the radio as you can, that will do the most to trap and reduce the noise.