I like TRF radios. I have one I built for a WWVB receiver on 60 kHz, and an old Arborphone 27. They need a long antenna, and are a pretty unsatisfactory radio, but I still like them for their simplicity.
Hello. Regarding the beauty of TRF radio, I can agree with you, but I wish I could have the place for a long antenna, as well as a quiet electrical environment. 🙂 As for the Arborphone 27, you have a very beautiful radio! Thank you for your comment. 🙂
@@appunti2, you might try building a 1 or 2 turn, 4 foot diameter, tunable mag-loop using aluminum roof flashing material to get the highest Q possible and lower the noise. There are lots of videos about different versions on UA-cam. Mine works in a horribly noisy environment. (I have heavy power-lines right outside my bedroom and living-room windows, so only about 15 feet from my indoor antenna.) Add a cheap pre-amp to get the signal level up and you'll be in business. Tuning and positioning to minimize noise is inconvenient, but that's the trade-off to have a compact antenna that will work in your environment. Basically the tunable loop and pre-amp act as a first TRF stage, and a high Q (for a very narrow bandwidth,) small loop is the way to cut out noise. Such a loop with a good tuning capacitor can have such a high Q on lower frequencies that the antenna's bandwidth on the 160 meter ham band just above the AM broadcast band is less than the full bandwidth used by a SSB signal. That removes a whole lot of noise before it even gets to the receiver.
I like TRF radios. I have one I built for a WWVB receiver on 60 kHz, and an old Arborphone 27. They need a long antenna, and are a pretty unsatisfactory radio, but I still like them for their simplicity.
Hello. Regarding the beauty of TRF radio, I can agree with you, but I wish I could have the place for a long antenna, as well as a quiet electrical environment. 🙂
As for the Arborphone 27, you have a very beautiful radio!
Thank you for your comment. 🙂
@@appunti2, you might try building a 1 or 2 turn, 4 foot diameter, tunable mag-loop using aluminum roof flashing material to get the highest Q possible and lower the noise. There are lots of videos about different versions on UA-cam. Mine works in a horribly noisy environment. (I have heavy power-lines right outside my bedroom and living-room windows, so only about 15 feet from my indoor antenna.) Add a cheap pre-amp to get the signal level up and you'll be in business. Tuning and positioning to minimize noise is inconvenient, but that's the trade-off to have a compact antenna that will work in your environment. Basically the tunable loop and pre-amp act as a first TRF stage, and a high Q (for a very narrow bandwidth,) small loop is the way to cut out noise. Such a loop with a good tuning capacitor can have such a high Q on lower frequencies that the antenna's bandwidth on the 160 meter ham band just above the AM broadcast band is less than the full bandwidth used by a SSB signal. That removes a whole lot of noise before it even gets to the receiver.