Ruger Precision Rimfire 22lr set up for NRL22 matches
Вставка
- Опубліковано 27 гру 2019
- Here are the details on my RPRR set up for NRL22 matches:
Ruger RPR setup for NRL22
From back to front:
Homemade bag rider (1” scope ring and aluminum tubing)
Wiebad Mini Stock Pad
Masterpiece Arms (MPA) Enhanced Vertical Grip (EVG)
Stock trigger, adjusted down to 2.5 lbs
Catalyst Arms Hammerhead bolt knob
Vortex Diamondback Tactical FFP 6-24x50 in Burris mount
Anarchy Outdoors throw lever
Homemade data card holder
Kidd Plunger kit with stiff spring
Ruger BX-1 magazines
JKL Precision MagFlag
ER Shaw 18” stainless barrel, match chamber cut
Tin foil tape bedded receiver block, torque action screws to 35 in lbs
Atlas BT-10 bipod with ADM rail mount and Hawk Hill Talon feet
Polymer rail covers and MLOK rails
Short Action Precision Positional Rifle Sling
Thunderbird Long Range bag
SK Rifle Match (Red Box) Ammo - Спорт
good info I bought one for my 3 year old grandson and grandaughter they are 6 now and an AWESOME shots I'm going to build me one now. They are FUN and cheap to shoot. Never thought I would like shooting 22
Thanks for all the the info.
Nice setup!
Ty!
The Timney trigger would be a great improvement over the factory trigger. Timney is ajustable two stage. Both stages are ajustable from 8oz.-2LB.
I know its 95 percent shooter and you have that covered! Nice Whitetail! I saw your hunt last season and that was a nice Kansas Buck with a bow!
Great video!
Thanks for watching
I had a friend that tried to get a Ruger to compete with our rifles. He finally got it shooting nice but the only thing Ruger on the rifle was the trigger guard.
They can be hit or miss that's for sure
What was your group size with the factory barrel
Amazon has pov glasses with 1080hdp for cheap and work great for pov filming
Thanks for the torque specs
Thankfully closed caption saved the day on this one.
Nice looking RPR, I'm thinking about finally doing something with mine (got it in 2018) I need to push it's range out further for a start, I have 1.25" MDT rings & a Vortex Diamondback 4-16x44 FFP EBR 2C Reticle but can only get to around 180/5 meters fully dialed & around 210/15 meters using drops on scope. Any suggestions on the best way to getting it shooting further would be great for a start and any upgrades you think I could look at? Cheers from Australia, p.s, I'm limited with budget.
another sling is a slip cuff quick release sling. $40-$80
I have made pretty much exactly the same bag rider as you. It works really well. What made you change from the RPR to the Bergara?
I wanted to move to something in the Remington 700 platform
regarding ER Shaw barrel..did you verify headspace? Some have reported a shim in need, I suspect due to variations in receiver manufacture.
Mine could use a very thin shim as the bolt is very difficult to close since the barrel swap
Thanks for that I have an RPR in Oz and have just upgraded the barrel as well my option was a 22" barrel do you have the option of barrel length if why did you stick with the 18" thanks again
Yes, could have gone longer. From my research, there wasn't much go gain going longer and shooting standard velocity ammo.
@@darrondb Thanks I didn't have a big choice
20 inch is the sweet spot with standard velocity ammo. Any shorter or longer and you lose velocity. I sacrifice velocity for better harmonics with a 24" heavy barrel. For me I found that this make the barrel except a wider variety of ammunition. This works for me and find the 24" heavy barrel isn't picky with ammunition. I believe harmonics plays more of a role in rimfire when choosing ammunition then chambering. Both are important but for me it's nice to shot any match ammunition with all great results. Of course you still get what you pay for in ammo. One example is lapua center x and SK standard plus group the same at 50 yards and no noticeable difference tell you go over 80 yards. After 80 yards center x is tighter .SK STANDARD is 1/3 the price. Very little difference between any match ammo in 50-70 degree temperature. Cold weather or hot weather Also will separate the different match ammo. HAPPY PLINKING!
Wow...lots of mods... Where did you get that JKL chamber flag ? Nice set up. Does the barrel mod put you in open class ?
Can you show some targets against aome ammos. My RPRR is pretty much bone stock but is a keeper. Do some more vids....
😁👍
The chamber flag/mag block came from JKL Precision. Its listed under the 10/22 accessories. The barrel (and other mods) does put it in the Open class. I'll try to track down some target pictures but the winner of the 10 or so brands I tested at 100 yards was SK Rifle Match.
Your rear bag rider, is it a solid piece of aluminium or hollow pipe, love what you’ve done with your rifle and makes a good solid foundation platform 😋👍
Hollow piece of 1 inch aluminum tubing. Thanks for watching
The stock pad, was it just the rpr option or did you contact them to make it smaller for the rimfire?
Greetings! If I recall, I just got the one for the regular RPR and it worked fine
Does the MPA EVG grip need to be modified to fit I am about to order one for mine
I made a very tiny notch with a razor to accommodate the safety stop on the right side. 5 seconds of work and then it bolts right up.
Just purchased Ruger 10/22 LR Percision myself. Really have not shot it much. Think i put about about 40 rounds through it so far. Wanting to make it better.
Needing some suggestions please. I do know I do want to upgrade the magazine release, thinking of the trigger too.
Trigger is probably the best option
Who makes the padded cheek raiser or did you make that yourself? Awesome setup!
Wiebad
what is the ring height for the Burris cantilever? im looking for a cantilever but everything is 1.5" AR height...I want lower height 1" maybe
I used ar height since that is what I had on hand. Lower would be nicer
Might have to get this.. but does bolt action plinking get boring after a few minutes?
If you are able to shoot steel targets, its an absolute blast. I'm not into paper targets too much but steel is awesome
@@darrondb thanks for the reply.
I have the same rifle, mount, and scope sighted in at 50 yards. You mentioned your 75 and 100 yard holdovers are 2 and 6 MOA. Could you share MOA holdovers for extended ranges? It would be greatly appreciated.
Sure! With 50yd zero:
150yd +14
200yd +23.25
250yd +33
300yd +44.5
@@darrondb What? Seriously? I had no idea I could get that kind of performance out of this setup. What kind of groupings are you getting at 300 yards?
300 yards was stretching it, but not too difficult to have hits on a 12 inch plate. Wind makes things really hard
@@darrondb Most of my bulk ammo is 40gr 1255 FPS. Your cheat sheet will help get me on paper faster. Thanks for the valuable info.
@@YouStupidBunny the DOPE above was for SK Rifle Match at 1080 fps
Can I get some more details on the dope card?
Greetings! The card is a ID card blank (www.amazon.com/Premium-Printers-Graphic-Quality-Magicard/dp/B07Q12KGK7/ref=sr_1_7?dchild=1&keywords=blank+id+card&qid=1587573366&sr=8-7) with some Velcro on the back that I write my dope on with a sharpie before each match/stage. I clean them with rubbing alcohol and reuse them. The holder is a scrap piece of kydex and Velcro molded around a gear tie (www.amazon.com/Nite-Ize-Gear-Tie-Assorted/dp/B01MXU05IM?th=1). I can write out all my dope ahead of time and swap out cards between stages.This isn't my original design, I copied if from a couple of others I saw on the internet and at matches.
Basically you've swapped everything except for the receiver and magazine.
Hi does the mpa grip go on without any modifications. Thxs Sean
On mine I needed to make a very very small notch in the grip plastic where the safety selector diamond is. A tiny cut with a razor blade
@@darrondb ok great Thxs I’ve wanted to put a vertical grip on my rpr and didn’t know if one was even available. Thxs again Sean. And btw great videos. Thxs
Another great option is the Anarchy Outdoors Penguin. I would have probably gone that way instead of the mpa if it was available then
@@darrondb lol I have the tuxedo on it now but just wanted to try something more vertical. It seems fine just not as vertical
many thanks. Where do you by your barrel please ?
Barrel came directly from Shaw
@@darrondb Hi thank you for your awnser, can you give me the email of Shaw please?
@@gilbertmartin6170 just Google search for Shaw Custom Barrels
@@darrondb Hi thanks you for all info
Is the grip a drop in grip?
Yes, the MPA fits with no modifications
Thanks
What ammo do you use?
Mostly SK Rifle Match
@@darrondb Red? Yellow?
Red box
👍❤️😊👌🍻🍻🍻🍻🍻🍻
Just purchased a RPR 22lr and the bolt requires a surprising amount of force to push down and into place. It actually clicks each time. Is that normal for everyone or does my rifle have an issue? I was hoping for a much smoother action.
Mine was pretty stiff for a while but smoothed out
@@darrondb Thank you sir! The forward to back motion is like butter, but actually pushing the handle down into the lock position is incredibly stiff and there is a loud audible 'click' every time its pressed into place. it feels like I'm snapping a spring or getting caught on something each time. There is zero hope of holding a zero through a scope while pushing down that hard to get the next round into battery. I guess I'll just work at it and see if it smooths out.
The stiffness is normal, the click is unusual. Have you disassembled your bolt to make sure everything is where it should be? Sounds like maybe the extractor or ejector is hanging up on something
@@darrondb I'll be doing that this weekend. I would be surprised if ruger intended it to work this way. Just looked up a video on the disassembly of the bolt. Looks very straight forward.
You still running this rifle?
No. The Bergara is a better fit for me
wham ammo are you running
SK Rifle Match (red box)
@@darrondb Yeah they do seem to run well in mine too The Eley Standard in the 500 round box work well for me as well thanks
I want a folding stock for mine cos I cant shoot for the life of me but I want to look cool...
Unfortunately I'm not aware of a folding option for the RPRR
@@darrondb Wow. You are a real person)) Thought these were just ads))
Lol!!! Yep! A real dude!!
@@darrondb Cool Mr.Darron D b. My Mate and I went to our first ever shooting competition with my new RPR 22 expecting to win. We returned very dis-heartened. Man the real competitors were so good. It is the kind of sport that must be started early in life)) Nice vid. Respect.. J.
Don't get discouraged!!! I shot the RPRR for a full year and learned a lot!!
You still running this
No, I sold it to a friend to fund other rifles.
You really NEED to use a body MIC
Thanks for the input! For what it's worth, this was years ago and my equipment has gotten a little better since. Thanks for watching!!
😀😀😀😁😁😁😊😊😊🤔🤔🤔
you need to get a better mic. could not hear what you were saying.
Thanks Russell! Like most folks, I'm working with what I have :)
Santa heard you! All new videos recorded with a microphone. Thanks for watching!!
Audio
Thanks
FYI, those magazine style "chamber flags" are not legal, so watch out for an observant RSO who will ask you to use a "real" chamber flag. With your magazine well chamber flag, you can still have a round in the chamber as there is nothing sticking into the chamber to show that the chamber is empty ...
Thanks for watching! It all depends on the match. Many will accept the magazine blocks if you demonstrate an empty chamber first. But agree, you can still have a round hidden in there if you're not careful