Affordable Diesel Generator Deep Sea 7220 Digital Controller Overview

Поділитися
Вставка
  • Опубліковано 22 сер 2024
  • Overview of the features and usage of the Deep Sea 7220 Digital Controller included with each Affordable Generator diesel home generator.
    For more information visit www.AffordableGenerator.com

КОМЕНТАРІ • 33

  • @AliAkbarEsmaeeili
    @AliAkbarEsmaeeili Місяць тому

    Hi good time
    How can lock and unlock screen or permition to parameters on dse7320
    Thanks

  • @kaayosmomastersem8887
    @kaayosmomastersem8887 2 роки тому

    this module is the same model of my generator..may i ask u sir.how to reset this kind of module to going back the display on the screen showing again..because only blue screen can show .not just like before what happen.

  • @user-rf3fu9vx4p
    @user-rf3fu9vx4p 3 роки тому

    Good afternoon, I wanted to ask us on such a gynerator the alarm overvoltage of the gynerator worked, we eliminated the problems, leveled the amperage in 3 phases, but it still works for 5 or 10 minutes at the start and stalls and again shows the alarm overvoltage, please tell me how to remove this alarm on the panel?

  • @abdenourmerouane
    @abdenourmerouane Рік тому

    Dear sir ,
    I have a 400 kva bertolis eco 40 generator and cursor13 engine when I charge it deep sea after a charge of more than 50%
    I receive a message displayed on the screen
    ECU AMBER Warning high or short voltage check engine SPN65619, IMF 3 OC 196 .
    what is mean.
    Best regards

  • @chuckvenable4409
    @chuckvenable4409 Рік тому

    I have the dse7310 I just purchased.
    I was having an issue with the controller module shutting off and rebooting during run and at stop rest mode .
    I rechecked all B+ 12 Volts at pin 2 and B- at pin 1 for poor connections. Everything is good.
    Some times the module would just go dead and not reboot until I removed the battery terminal and reinstall it.
    This issue was intermittent. It didn't always shut off .
    My question is, could a intermittent shorted coolant temperature sensor cause this condition?
    Does pin 16 that the coolant temperature sensor connects to put out 12 volts ? This is what I'm reading at pin 16.
    Any advice I greatly appreciate.

  • @harrissonramirez9448
    @harrissonramirez9448 3 роки тому

    Hi, how are you? I have a dse 6110 mpu 4.1 which only looks green on the display and I can't see the parameters and I would like to be able to adjust that

  • @matiullahrahmany8806
    @matiullahrahmany8806 5 років тому

    Thanks from your information.
    Please explain about wiring of deep sea.
    Thanks regards
    Matiullah rahmany
    electrical engineer
    Alwatan electric and service co
    Afghanistan

  • @nadacap3464
    @nadacap3464 4 роки тому

    Thanks for all,can please explain about pin code ,when we forgetted pin code of 7320 KMII ,i wait your answer,please..

  • @squiddschapman5883
    @squiddschapman5883 2 роки тому

    Water level alarm what should I do ?

  • @user-nz2cn6le6r
    @user-nz2cn6le6r Місяць тому

    My generator is not starting as i want

  • @mohamedtalaat3662
    @mohamedtalaat3662 6 років тому

    please I want to ask about the wiring of the remote start input signal with the module and the ATS

  • @khalidali9325
    @khalidali9325 Рік тому

    Hi sir my jurnater is GCB TRIP plz solve the method

  • @riconieves4387
    @riconieves4387 3 роки тому

    How to adjust the voltage in dj controller

  • @sumaiyakitchen3805
    @sumaiyakitchen3805 5 років тому

    How do I know how many liters of oil is used?

  • @nathanwardlow1342
    @nathanwardlow1342 2 роки тому

    How do you put this controller in diagnostic mode?

  • @jacktasman9853
    @jacktasman9853 4 роки тому

    How to load control and load sharing?

  • @AsimiTerupo-so2bb
    @AsimiTerupo-so2bb Рік тому

    How to reset page please

  • @hallaalmadni
    @hallaalmadni 4 роки тому

    كيف نتخلص من اشارة المتلت الذي تتطلع في الطبلون ماطور كتربيلر 250كيلو

  • @DIYDaveT
    @DIYDaveT 7 років тому

    I can pretty much guarantee you that any generator made by an American company is not going to be very affordable. There is too expensive and laughably expensive but nothing better than that.

  • @user-gysev
    @user-gysev 3 роки тому

    Всем привет
    Регистрация на официальном сайте и обновления приходит на почту всё хорошо работает
    Всем удачи!!

  • @mohamedsiyam7447
    @mohamedsiyam7447 5 років тому

    How to setting configuration setting

  • @vechekaly1255
    @vechekaly1255 6 років тому

    please help me DSE I can´t log In into the software it does not recognized my user name and password how to use help me.

  • @ahmadsardar6873
    @ahmadsardar6873 6 років тому

    Can we wash display jack with patrl or thinner?

  • @themechanic9861
    @themechanic9861 3 роки тому

    My generator stops when it load. Beeping bus sequence failure. What is the possible cause?

  • @hardmetal86
    @hardmetal86 9 років тому

    What are the settings one need on 7220 amf controller when setting up a new generator ? Please so response!

    • @gulfspeedco2155
      @gulfspeedco2155 8 років тому

      need to program

    • @boughidasamir4711
      @boughidasamir4711 7 років тому

      What is Total KVA of generator ?
      Is it Diesel powered generator ?
      Is the Alternator 02 poles or 04 Poles ?
      is it Stand-by (backup) Generator or contineuos generator ?
      ... etc..

    • @mozwamala6724
      @mozwamala6724 6 років тому

      Need the programme set up to DSE 7220 , 7320 and GMP 260

  • @sergioaraya5474
    @sergioaraya5474 3 роки тому

    Hay algo en español

  • @TheRomeo4568
    @TheRomeo4568 6 років тому

    how to reset password on 7310 DSE