Honda X8R-S 50cc Acceleration!
Вставка
- Опубліковано 10 вер 2024
- The Setup of the scooter is:
Cylinder: Stock 50cc
Variator: Malossi Multivar 2000 with 7,5gr. rollers (but i think i should get 8gr. or 8,5gr.)
Carb: Stock one 12mm with 76 main jet
Belt: 820x18 but need replacing with new one at least 830x18
Exhaust: Giannelli Reverse
Electronics: Stock one
Clutch and bell: Stock ones
Air Filter: Malossi in the original box
Hola amigo, no consigo carburar mi honda x8r, ¿cuántas vueltas llevan los tornillos del carburador?
ive got an x8rs with a leovince unrestricted exhaust, 17,5 dellorto carb, a bit larger than 50cc and it goes 65 kmph tops
does a performance variator setup and an air filter give this much power?
ive got stock restricted cdi too and ive read that factory variators are undersized on these models
Здравей
Как вдигна Скоростта със CDI modul ИЛИ кубатурата на Цилиндър
Не, CDI-то е оригиналното и цилиндъра е 50 куб. само че нов, не оригинален! След смяната на ремъка моторчето вдигаше почти 90 на равното с мен, а аз съм към 100кг.
@@mi7aka922me puedes decir la medida por favor de la correa...?. Gracias
How did malossi multivar 2000 worked for you if it doesn’t fit any honda models?
Worked very well, changed top speed by 20km/h, but the belt was worn out and tops out at 80km/h after replacing it the top speed went to about 90-92km/h on flat road and 95km/h downhill! :)
But on all websites says that malossi multivar doesn’t fit any honda’s
@@everythingbro4786 well this malossi multivar is for honda's and only this type of honda's with that engine! :)
Can you send me a link of a website that has one which fits honda?
@@everythingbro4786 www.dianamoto.com/%D0%B2%D0%B0%D1%80%D0%B8%D0%B0%D1%82%D0%BE%D1%80-%D0%BA-%D1%82-malossi-honda-peugeot-50-multivar-517117-%D0%BA-4-11.html here, but the site is bulgarian and idk whether you can make a purchase on there 🤔🤔
very very nice :)
С какви части е мотора? Имам същия и имам проблем с варвенето !
В описанието съм написал колега! :)
My 50cc stock Honda x8rx rides 80
The belt is worn out thats why it can't go over 80, now with new belt the top speed is little over 90 km/h
0 to 50- 6 sec. 50 to 80- 20 sec.
The belt is worn out and its short, that why it revs out so quickly, and so i ordered malossi x special and waiting for delivery! :)
It is original or modified?
The specs are in the description! Its still 50cc btw! :)
@@mi7aka922 where is the description can u type it here
@@karmamango6315 The Setup of the scooter is:
Cylinder: Stock 50cc
Variator: Malossi Multivar 2000 with 7,5gr. rollers (but i think i should get 8gr. or 8,5gr.)
Carb: Stock one 12mm with 76 main jet
Belt: 820x18 but need replacing with new one at least 830x18
Exhaust: Giannelli Reverse
Electronics: Stock one
Clutch and bell: Stock ones
Air Filter: Malossi in the original box
@@mi7aka922 how did you unblock it?
it is a original not upgraded?
The cylinder was stock only upgrades are: exhaust and variator, and the belt has to be replaced cuz it was worn out and It revs out really quickly and not gaining speed at top end!
what is difference with stock components? new variator gives it more speed? where did u find parts
Какви подобрения си правил по мотора .
В описанието пише колега! :)
@@mi7aka922 Извинявай но не виждам такова и за това попитах
@@Gazarr1 понеже клипа се е качил като "Shorts" описанието се пада от дясно от падащото меню го избираш! :)