I have it two days it now and i must say flavour is much better then Ares2, even with simple wire. This Airflow control is amazing, next time i buy bellcap which look even better and has 3mm. Only Con is noise specially on 0,8-1.0mm on wheel, sometimes i have bubbles in tank, not sure why, seems after refill, rebuild. Good review inspiring, i was chooising between Bishop and Pandora, but AirFlow control somehow win for "now". Mhmh sorry for my english.
@The Witcher. Enjoy it I too enjoy the Pandora V2. As for the bubbles it is very normal as the gravity fed juice flow control is working properly and delivers liquid to the cotton hence the bobbles.
You have to srcew the disc with your tweezers inside the bell cap. I use it together with the other bottom plastic disk that closes one side of the airflow adjustment on the bottom of the rta. If you done this you get a proper and much more quiet mtl experience. Flavor will be better and that dial airflow makes more sense.
I think the chamber reducer will reduce the throat hit and may make better flavour. It screws into the top of the chamber/chimney above the coil. Interestingly GrimmGreen preferred the V1.
Thanks Adrian for the info. About Grimm that is interesting as I no doubt prefer V2. Like everything else in life we all have different experiences & likes.
Evening Nathan I have used you as usual for build reference I picked one of these up for 15 pound brand new on offer a very good tank as you said well worth 15 quid anyway have a good day
@@nuggi-DK yes exactly I since discovered that you can screw it in the chamber so it is meant to reduce the chamber for enhanced flavour. I did notice a slight enhancement actually on already superb flavour
Now u made me more problems to decide ahahaha. Seems so beautiful. And i have a big list to pick for my fruity liquids. Seeing ur videos are really awesome and ur guidance also amazing. Keep up the good work . Ur videos made me make a list of mtls i want and i wish i could get them all but tripod , dvarw fl , pioneer and pandora v2 seem awesome. Wish i could decide one to buy
@kostakis xwl Ok I will try to make it easier for you with a few options. If you want to spend a one off investment on a high end MTL go for the Dvarw but watch me wicking method so you get it right it is very easy just needs practice. The reward is a very enjoyable vape & one of the best. If your budget only allows you a mid budget MTL. In these category you have a few options. The Bishop. The Aromamizer Classic or the Pandora V2, all are excellent and produce excellent flavour and general hassle free vaping, if you go for the Pandora V2 choose the Bell cap it really changes the look completely, the wicking is easy and straight forward on all 3 especially the Bishop. The Pioneer is a bit more tricky on the wicking and build quality is not as good as the others but if you get it right (it is not difficult watch me tutorial on the pioneer) the flavour is one of the best. As a sum-up if I may advise you, forget the high end for the simple reason that if it would not fulfil your high expectations the high price will add to your disappointment. As you did did not mention the Bishop in your list i would advise the Pandora V2 you will not be disappointed and the price is very reasonable on ecigone UK website. I hope the above was helpful.
@@netvaper well is it bad choice to pick a dvarw clone? Will it be bad? I like bishop but since i got ripley and i was disappointed with it i dont want to buy something thats similar with it and from same company. As for high ends i was between dvarw fl , tripod and edge from steam tuners. Last one isnt that famous outside the greece. As for dvarw which would be better? 22mm or 24 mm? Bell cap on Pandora v2 helps and gives better flavour or its just better appearance? . Pioneer seems cheap stuff but does it perfom better than dvarw and Pandora v2? At fruity flavor liquids . I dont know how to thank u , u are way too helpfull.
Some clones are as good as the original. I enjoy the original Dvarw immensely but I can assume the clone will be as good, on the plus side with a clone at least you did not spend a fortune if it did not meet your expectations. The Bell cap on the Pandora is the extra 1ml but mainly the look. The Pioneer produces very good flavour that is heard to find better in similar price bracket but not like the Dvarw which in terms of Flavour is right up there with the Kayfun lite so give the clone a go & let me know. I would go for FL 24mm
@@netvaper i ll get a dvarw clone and pandora v2 or pioneer. If wick is ok at pioneer it will perfome better than pandora v2? Also are they an upgrade from Brunhilde?
@@kostakisxwl9642 You can take without any problems Dwarv clone, but choose the "experience" cloners e.g. SXK or YFTK. Don't buy any most cheeper clone. Dwarv it is quaite simple construction and the clone manufacturers will match. I have a clone and it works perfect
Finally lol! Great review too! I'm a bit bummed you said the Bishop isn't intense. I bought it because I want intense warm flavor with my fused coil. Will ask though, how's the Pandora compared to the Dvarw?
Thanks Ali. Both are excellent, I tried to explain the differences in delivery of flavour, the Bishop produces defined & rich / warm flavours and the Pandora has that punchy flavour combined with the noticeable throat hit, it does not mean it is better just somewhat different. If you try both you would know what i mean. The Bishop is still my number one in the mid budget category, as a overall excellent MTL RTA but not by any big margin over the Classic and now the Pandora V2. The Dvarw is on higher league over the above in all categories.
@@netvaper that's great man especially since I have shipped to me two Dvarws two Artemises (you rated it top league if it wasn't to reverse threading) and two Bishops, Aromamizer classic, and Tauren. might have to sell the Tauren and get a Pandora v2 lol. I'm starting to get a bit sick of the expromizer v5 tbh.
@Ali Srour the Artemis produces excellent flavour indeed if not for the reverse threading i would have used it daily i wonder how would you get on with it😊 As for the ExV5 i did not bother the V4 & V1.4 are way better
@@netvaper yeah man I love your reviews and how honest they are. I even found the vacuum and leaking issue with the expromizer v5. Will wait for the Pandora v2 to go cheaper than 50$. Best of luck Nathan and keep up the great work. P.s. thanks for answering all the questions I drowned you in Lol.
@Ali Srour. Every one has their own personal taste and preferences so one can choose from all the MTL RTA's the one that appeals to them the most. So much so, that i know a guy who prefers the Aspire Neeko to any other MTL high end or low end. For him the Neeko is the best option.
@@netvaper yes but I like to gather opinions to form a general picture. Me for example I prefer the Siren v2 with a 3-3.5mm round coil over the Expromizer v5
Thanks. the answer depends on your preference. The Pioneer delivers very sharp flavours but only if the wicking is done right the Pandora V2 on other hand delivers nearly as sharp flavour but the throat hit is stronger and easier to wick & better build quality
@@netvaper Thanks a lot One more thing Would you pls make a video about the tanks steel You know there is a kinds of steel that’s not healthy enough for us to use In other hand there is 316 or 316L which is ok for us I know I’m not clear enough but i hope you understand me ☺️
@Baghdad Library I actually did a review on different types of coil wire, i hope that is what you mean. Link here ua-cam.com/video/J8XMbU_nmS0/v-deo.html
Sir, i'm confused. which one better, Pandora V2 or Alberich V1? because Alberich V2 does not available here in Indonesia. thanks in advance. Edit: I’m already have B3 MTL RTA, and Brunhilde MTL RTA. is it worth it to add those two?
Well, there are two questions you need to ask yourself. How many MTL RTA do I need to be happy or How many do I want!! The Pandora V2 is fantastic & hassle free, the Alberich is fantastic as well but needs a learning curve otherwise you might experience some minor flooding issues especially when re-filling
Another very nice and accurate review. I'm interested if you may tell us please 2 more details: which NET is better for this RTA (blondes. dark, mixtures...)? and have you noyiced bad retirnd of black condensate ("cooked" liquid) inside the fresh one? I have faced this problem with Bishop and Spica pro after1 ml appered black liquid traces in the fresh one.
Thanks Andrei i use this one mainly with darker NET's like the Bafometto by LT. If you notice black streaks in the liquid it is time to change the cotton or the coil if used for over 4 weeks constantly. I personally do not wait for theses tale tale signs as I re-wick every 2 days on blond tobacco & sometimes the same day after 2ml on the bolder ones.
Get the clone then! I hear the Patibulum unleashed (version 2) has bad reviews compared to the first version. I might buy a clone also depending on your review if you ever decide to get one! Your reviews are what I rely on the most compared to other youtubers. Continue doing what you're doing. I'm sure alot of people rely on your reviews too. Cheers!
@@netvaper Dear Nathan, I'm facing an irritating issue with my Pandora V2. I usually draw through 1.2/1.4mm slots intermittently while working, but when I leave it alone for about a couple of minutes, both my devices - a Centaurus DNA 250c and a Thelema Solo - prompt me whether it's a new coil or an old one, more often than not. This doesn't happen with my Bishop or Trio. I've tried re-screwing the 510 connector to no luck. I've checked the Yachtvape authentication for my atomiser, it's legit. This issue's been bothering me since I bought it. The store I bought it from won't replace it, neither do I want to go through the hassle to enforcing my warranty rights. I leave out the chamber reducer as I like my coils a bit higher which, combined with the punchy flavour, delivers a much desired throat hit as you very accurately pointed out. I fell in love with this tank after buying it on your recommendation, even more than my Bishop. But it's a shame that such a bothersome issue is marring my experience with it. Any suggestions, sir?
@@SyedMahmud88 Did you notice if the ohm’s read is bouncing up or down.it sound to me as somehow the coil is loosing contact with the mod & re-connecting prompting the mod as a new coil. Did you check the deck screws that they are fully tight. Or maybe one of the coil legs is partly cut. Insert a new coil and see if the issue has gone.
@@netvaper It worked! One of the coil legs was cut out of proportion, fixed it and also changed the deck screws. The ohm read had been fluctuating, but not anymore. Thanks boss!
I wanted to recommend this channel to a friend, but he already watches lol! Nathan by the way, do you still reach out to the Tauren elite pro? It's getting reviews that it's a good tank, but seems a bit lacking in the flavor department. I saw your videos but just checking if it's still being used.
Well Ali yes i still use it on occasion as the general vaping experience with THC Pro is good but since i started using the Pandora V2 in addition to my other excellent MTL's and as off late the AIO's & bridges that I enjoy, the THC was neglected somewhat.
@@netvaper yeah mine is definitely getting sold the moment it arrives. Bishop and others I ordered look much more promising. Though I do kinda like the drip tip the thc comes with lol
Hi i have watched your videos alot lately on MTL and NET Juice and im now going down that road i wondered if i could ask you what you prefer to use coil wise in the parndora v2 ? Love your reviews
@Elliott Back i either use pre-made naturevape coils 1.0ohm core clapton 28+38ga Ni80 or Kanthal round wire 26ga 6-7 raps 2.5mmID that i rap myself 0.8-1.0ohm
@@netvaper thank you for the advice i really appreciate it coming from someone like yourself a master of the MTL, just ordered my self some with the help of nature vape as well. Thank you for your detailed videos on building i wouldn't be as good as i am now without your videos.
Hey thanks for the great videos. Between this one and the THC Elite Pro MTL RTA, which one would you recommand? Right now I have a berserker v2 but it leaks.
Hello, I just discovered your channel and it makes me one of the best on UA-cam, you have very good reviews, congratulations, keep it up, you already have one more subscriber even though I don't speak your language, I use UA-cam subtitles and I'm trying to see most of them of your reviews. (Sorry if it's misspelled, I used Google's translator to write to you). Congratulations again. Might you help me? I want to start with mtl atomizers, I've been vaping for 7 years now, but mtl rta so far no, the closest thing to an mtl rta would be pods, but I can't decide which one to choose, my options are Pioneer, Neeko, Pandora V2, Expromizer v1.4 and Siren V4, which of those would you recommend? or any other recommendation? I'm looking for a pod-like hit with a good throat hit and flavour, for example I really enjoy the caliburn 1 right now. Thanks.
@H. Ayala thanks. As for you list they are all very good MTL RTA’s but if you are looking for throat hit & good flavour the Siren V4 is top candidate. The Pandora V2 & Neeko are equally excellent & sleeker designed. As an all rounder go for Neeko or the Pandora they are both easy to build & maintain with very smooth airflow & excellent flavour
Dear Nate, It looks very similar to Bishop as you mentioned. I am very happy with my Bishop. I am thinking about the purchase of Kayfun Prime. Many MTL RTA reviewers say that Kayfun is above all else. Is it worth buying? Your recommendation will be decisive for me. Thanks in advance🙏
@xiaomijournalist Journalist. If your budget allows you to spend on a Kayfun Prime I fully recommend it, as it is one of the best MTL RTA's for flavour and smooth MTL drew. The build quality would last for years. Just a word of caution do not drop it on a hard surface as the airflow ring & housing are delicate.
@NET Vaper I got my Kayfun Prime Dark Sill today. It's fancy and the taste of the liquid is stunning :) I have two questions. Kayfun Prime doesn't work on Paradox Mod. Mod says to check the atomizer. I've tried many things, like wicking correctly, etc. Still doesn't work on it. Are you struggling with the same issue with your Paradox? I use it on another mod. But the tank (Kayfun) is a bit warm when I vape. Is it normal? Thanks in advance🙏
I wanna buy one for my vaporesso px80 to make it mtl and i usually vape fruity liquids 0 nicotine. (Dont know what to buy between expromizer, bishop, pandora v2, berserker mini v2 and ares)
@Lone Walker. Both are excellent it is down to your personal preference if I can buy only one I would choose the Bishop but that is purely my own preference
As for your list on your 2nd comment it is down to 3 Pandora V2 bishop & Aromamizer Classic. The classic delivers the strongest throat hit. I personally would have a dilemma between the classic & bishop. Probably I would buy both😊
@@netvaper i liked pandora more for its design. Many friends told me that bishop isnt so good on fruity flavours. Is there any difference between pandora and bishop? Any plus on one or the other?
As i said the wicking method on the Bishop is what does it for me. But as with these excellent RTA's the flavour is superb on all of them with tiny margins if any. So if your heart leans towards the pandora V2 do not hesitate as it is excellent MTL RTA that i enjoy nearly daily.
Thanks Chrystian yes you can but If you want to lower the coil nearer to the airflow or if you install your coil opposit way meaning coil down legs up you need to make sure the coil does not touch the post on either side. I imagine it will be a tight fit
Hi , it’s a great tank , I’m pro in vape and wicking but when i come to fill it and close the top cap it leaks from the airflow so i fill it from the bottom , what is the solution for this problem , can you make a wick totorial please. Your follower from Iraq 🌹
Hi Ayad i use the Pandora with the bell cap so it is a bottom feeder as well. You must keep the cotton ends fairly long & wide to cover the whole juice well and long enough to reach the deck but not too long they fold. When you fill from the top the pressure of the liquid sometimes can lift out one cotton end when it is too short causing leaking. I can record a close up of me wicking the Pandora & email it to you via google drive it that helps.
I also own the pandora v2. I have a question, wicking related. I recently got 29gauge kanthal and build 2.5mm id 6 wraps, because i want 1.5ohm so to vape at 10watt - 3.74 volt. The problem is that when i used to build with 28gauge kanthal, it didnt loose its shape while wicking, but with the same amount of cotton the 29gauge almost gets destroyed. Does thinner coil suppose to need less cotton or it's just harder to wick it. If the latter, any tips?
@zafoulis. 29g is super fine wire so when you force the cotton through it can easily out shape the coil. I use 26g Kanthal for my own rapped coils so I can insert a bit thicker wick. The problem with very fine wire coil is that if you need to insert thicker cotton to fill a bigger juice well to avoid flooding you are limited due to the coil tender nature. I don’t see any advantage in super fine wire as a MTL coil can be between 0.8ohm to the ideal 1.0ohm that you can achieve by a 26g 5-6 wraps on 2.5mm Id.
@@netvaper the problem is that with even 28gauge, the down limit watts needed for the coil to not underperform are high enough to have unpleasant throat hit for me. I can't vape higher than 11 watts with ease and also I can't lower the nicotine, currently 12mg nic salts 50/50, or it won't satisfy me enough to get away from cigarette. In addition, higher VG ratio seems to sweeten the taste of vape and i dont want that too. On the other hand, more than 6 wraps doesn't have enough space between each wrap making it too big for the airflow under the coil in pandora v2(i only like very stricted draw, so i use the 0.8mm hole). I also found that only with spaced wraps i can chain vape 2-3 draws without getting too dry vape, whereas 7 wraps without spaces (because only without spaces is not too big for the deck) cant get more than 1 draw with ease.
@@zafoulis it is all sound too complicated. Simplify things a bit. I use mainly pre-made 1.0ohm core Clapton coil by naturevape (UK) on 16w with 70VG30PG tobacco liquids (NET) with no too strong throat hit or harshness. You can insert an airflow reducer I showed it in the review to make you airflow even tighter. Vaping is meant to be easy and straightforward so the best way is to buy some pre-made MTL 1.0ohm coils that should do it😊
@@netvaper thank you for your effort haha, I'm just too complicated my self I guess 😝. Btw, about the reducer, i cant seem to find it somewhere in stock, I'm from Greece. Any suggestions of where i could order one, would be welcomed too!
Hej, im just starting with all this, and Pandora it is my first rta. I think we have a similiar taste in liquids. Do you recommend to simply buy more of this same coils - mtl fused clapton 2.5mm,0.8?
@@netvaper great! Can you recommend also another sexy rta same dimensions or shorter for buy next for another liquid? Also, i saw some people saying that is drip tip so important for experience, and that ceramic drip tip is way to go. Can you recomend some drip tip, like at least in design if not material. This pandoras drip tips are strange to me. Maybe i need to get used to it..
Well Sanda there are many RTA’s that I reviewed perhaps the Bishop with the new top fill cap is a similar looking and size & very good quality. As for the drip tip the main thing it should be narrow bore for MTL drew & comfortable to you, everything else wouldn’t make much of a difference to your vaping experience
@@netvaper hej, last q :D how much i can expect that fused clapton to last? Seems like it burned in 7days this one fused clapton which we have got with Pandora. Is that ok? Im vaping on 16w like you.
@@sandaDru defiantly not ok. A good quality coil should last a few weeks & longer. When you change your cotton dry fire you coil and dip in cold water then dry fire again & dip again in water & dry fire again, your coil will be as new. I clean my coil every 2 days and i change every 4-6 weeks. it would have last longer. Check out my tutorial i have done ages ago ua-cam.com/video/ct4GJgzNm3o/v-deo.html
Hi Cem as I explained in the review it blocked one entire row of airflow hols so the airflow can be fined tuned to even more restrictive MTL drew by turning the external airflow ring in conjunction with the airflow wheel that controls the airflow under the coil. It is really for these who like a really tight drew. For most the large existing airflow options is sufficient.
The ones that I come to mind this minute are Mid budget Siren V4 - Aromamizer Classic- Alberich. THC Pro High end Dvarw-Taifun GT one-Penodat V2-Fev. I am sure there others that might come to me later😊
@ Hany Borsali. Both are excellent although the Pandora delivers a stronger throat hit. It is your personal preference on design and price. If you choose the Pandora without the bell cap the bishop 4ml option looks better and hold more liquid. If you choose the Pandora with the bell cap both look amazing but the Pandora holds 3ml and bottom fill whilst the bishop now has top fill cap. Flavour wise both are amazing. Now you need to choose
Hi, recently discovered your channel and enjoying your reviews. I've been vaping DTL on-and-off for 3 years with my trusty old Smok X-priv Baby with mesh coils - making huge clouds, but now I want to have a dedicated MTL RTA to vape on salt nic flavours. After watching some reviews, I'm leaning towards Pandora2 (that spin-wheel seems simple enough) or Aromamizer Classic (one reviewer said that its flavours are more intense than Pandora2), although budget clones like 415 or Millennium RTA are also a possibility, cause they are super-silent. But after watching your earlier review of Arbiter Solo and your "Best of 2021" video, I'm now properly split. Which one would you personally go with for a daily MTL RTA to perfectly replace the smoking sensation but also be simple enough for daily use - Pandora2, Aromamizer Classic or Arbiter Solo? or would you recommend something else?
Hi Garen the Pandora is really good MTL & easy to wick & coil and with the bell cap it holds 3ml and gorgeous looking also the flavour is excellent and the airflow is the best of the 3, the only fact you should be aware of that with the bell cap you need to insert liquid by turning the cap upside down and fit the liquid nuzzle between the glass & chamber (bottom fill). The Aromamizer is a bit more tricky to use daily as the deck is a plug in design. The Solo is a more of a traditional look and very sturdy and easy to use as a first MTL. In my opinion if you don't mind the bottom fill of the Pandora choose the Pandora with the bell cap as the bell cap is what transforms the design and gives it the push look.
@@netvaper Thanks a lot for the elaborate reply! After writing that comment I saw your review of the Bishop... and WOW, that is one impressive RTA. I don't care about the looks really. What matters is that it is really SILENT, and so SIMPLE. Silence is a big factor for me, cause my DTL mesh makes a hell of a turbo noise and it is distracting even for myself when I'm working. The only drawback of Bishop is that it's bottom filling. If it had top-fill with screw-&-slide system, and chamber adjustment like in Spica Pro, then it would be THE perfect MTL. So my new question to you is: Is the flavour on Bishop as good as Pandora2 ??? (if it is, then I think I'm gonna go with Bishop, as they are pretty much the same price). And question 2: Which one would you personally choose for daily MTL if your only choices were Pandora2, Bishop, Arbiter Solo and Aromamizer Classic?
Well Beken we all have our personal taste & preferences i actually love the look of the bell cap as for bottom fill i have other bottom fill RTA's so i am used to it. but each to is own i suppose
You screw the chimney cap into the bell using your tweezers. It doesn't make any difference whatsoever though. I've had the Pandora V2 for a few days now. I like it, but I can see why MTL purists wouldn't due to the smaller airflow options not really being tight enough. I use mine on the 1.2mm setting and it works great for me. As a vape though, I'm not sure whether or not I prefer it to the V1 yet! Nice one though mate.
@@Skywalker37ful my favourite RTAs? At the moment my favourite is the Steam Tuners Edge. Of all time, there are too many! The Atmizoo Tripod is my favourite, as well as the original Kayfun Lite. Like I said though, I have a lot that I use regularly!
Thanks Raspa for the info as you say it does not make any difference so i will not bother to figure it out. I am not sure what you mean in regards to tight airflow option as you can dial it down to the 0.8mm i can hardly vape it on that setting
@@netvaper I just meant that I found the tighter airflow settings to be too vague, and not particularly defined. I've only had mine since Wednesday though!
@@Skywalker37ful my favorite is bishop, for net liquids its great. I hardly vape fruits these days but when i do i prefer dvarw.3rd atty in the rotation is flash 17mm it is great with net liquids and delivers almost cold vapor.
@Lutgardis. The Neeko is solid & easy to wick & smooth drew & excellent flavour. The Pandora V2 I very much the same & with the Bell Cap looks high end (although bottom feed with the Bell Cap) it is really your call on price & what appeals to you most visually. Both are a worthy buy.
I bought it and I'm frankly disappointed, when you want to do tight mtl cigarette draw you get hot, impossible to chain vape compared to a kayfun more than 2014 I frankly regret having it bought this stew it has a good rendering of flavors at 2.0 on the wheel and 5 holes on the base, but with this setting we are no longer in tight mtl, at 17w coil at 0.82 kanthal 0.40.
@Mario Florentin I vape mine on 1 hole at the base & 1.2mm on the wheel with the 26g MTL 0.6 ohm coil supplied on 16w, perfect MTL without no heat and i can chain vape all day long & the flavour is superb. Maybe you lowered the coil too low, i kept mine straight as shown in the close up. it is one my favourites now. I hope you sort it out as this MTL is amazing
@@netvaper Great, I reassembled my coil which was too close to the airflow, the roulette at 1.2, a hole on the base and it works like hell, and I'm in mtl, thank you friend and good vape.
Because of you, I bought the Pandora. I already love my Neeko with the Paradox, that because of you. You turned me into an MTL vaper. Thank you!
I am flattered Claudiu😊 enjoy your MTL RTA’s
I have it two days it now and i must say flavour is much better then Ares2, even with simple wire. This Airflow control is amazing, next time i buy bellcap which look even better and has 3mm.
Only Con is noise specially on 0,8-1.0mm on wheel, sometimes i have bubbles in tank, not sure why, seems after refill, rebuild. Good review inspiring, i was chooising between Bishop and Pandora, but AirFlow control somehow win for "now". Mhmh sorry for my english.
@The Witcher. Enjoy it I too enjoy the Pandora V2. As for the bubbles it is very normal as the gravity fed juice flow control is working properly and delivers liquid to the cotton hence the bobbles.
You have to srcew the disc with your tweezers inside the bell cap. I use it together with the other bottom plastic disk that closes one side of the airflow adjustment on the bottom of the rta. If you done this you get a proper and much more quiet mtl experience. Flavor will be better and that dial airflow makes more sense.
Thank you for your advice
I think the chamber reducer will reduce the throat hit and may make better flavour. It screws into the top of the chamber/chimney above the coil. Interestingly GrimmGreen preferred the V1.
Thanks Adrian for the info. About Grimm that is interesting as I no doubt prefer V2. Like everything else in life we all have different experiences & likes.
Evening Nathan I have used you as usual for build reference I picked one of these up for 15 pound brand new on offer a very good tank as you said well worth 15 quid anyway have a good day
Thank you Chris for your update. For such a good RTA you definitely got a bargain. Enjoy it
I am one of your followers from Syria, thank you
Wow all the way from Syria home of the Latakia tobacco (originally) thanks basem
Hi. I’m absolutely enjoying the 415(c). My daily vape, and I heard about it on your channel. Thank you 😊
@Naguib Mansor.I am happy the channel was beneficial to you. Enjoy your 415 it is a superb MTL indeed.
@@netvaper yup, and I never saw that coming.
The chamber plate screws into the chimney by using your tweezers to screw it in, hence the 2 holes in the chamber plate as well as the threading.
Thanks Kevin for the info much appreciated.
Chimney reducer as on spica-pro?? or, that's what i think 🤔
@@nuggi-DK yes exactly I since discovered that you can screw it in the chamber so it is meant to reduce the chamber for enhanced flavour. I did notice a slight enhancement actually on already superb flavour
@@netvaper I saw it further down in the comments. ☺
I should have read them more thoroughly before writing.
Excellent review off the pandora V2 👌
love this new video. no fps drop nice to watch
Thanks krisna
Now u made me more problems to decide ahahaha.
Seems so beautiful.
And i have a big list to pick for my fruity liquids. Seeing ur videos are really awesome and ur guidance also amazing. Keep up the good work .
Ur videos made me make a list of mtls i want and i wish i could get them all but tripod , dvarw fl , pioneer and pandora v2 seem awesome. Wish i could decide one to buy
@kostakis xwl Ok I will try to make it easier for you with a few options. If you want to spend a one off investment on a high end MTL go for the Dvarw but watch me wicking method so you get it right it is very easy just needs practice. The reward is a very enjoyable vape & one of the best. If your budget only allows you a mid budget MTL. In these category you have a few options. The Bishop. The Aromamizer Classic or the Pandora V2, all are excellent and produce excellent flavour and general hassle free vaping, if you go for the Pandora V2 choose the Bell cap it really changes the look completely, the wicking is easy and straight forward on all 3 especially the Bishop. The Pioneer is a bit more tricky on the wicking and build quality is not as good as the others but if you get it right (it is not difficult watch me tutorial on the pioneer) the flavour is one of the best. As a sum-up if I may advise you, forget the high end for the simple reason that if it would not fulfil your high expectations the high price will add to your disappointment. As you did did not mention the Bishop in your list i would advise the Pandora V2 you will not be disappointed and the price is very reasonable on ecigone UK website. I hope the above was helpful.
@@netvaper well is it bad choice to pick a dvarw clone? Will it be bad? I like bishop but since i got ripley and i was disappointed with it i dont want to buy something thats similar with it and from same company. As for high ends i was between dvarw fl , tripod and edge from steam tuners. Last one isnt that famous outside the greece. As for dvarw which would be better? 22mm or 24 mm?
Bell cap on Pandora v2 helps and gives better flavour or its just better appearance? . Pioneer seems cheap stuff but does it perfom better than dvarw and Pandora v2? At fruity flavor liquids . I dont know how to thank u , u are way too helpfull.
Some clones are as good as the original. I enjoy the original Dvarw immensely but I can assume the clone will be as good, on the plus side with a clone at least you did not spend a fortune if it did not meet your expectations. The Bell cap on the Pandora is the extra 1ml but mainly the look. The Pioneer produces very good flavour that is heard to find better in similar price bracket but not like the Dvarw which in terms of Flavour is right up there with the Kayfun lite so give the clone a go & let me know. I would go for FL 24mm
@@netvaper i ll get a dvarw clone and pandora v2 or pioneer.
If wick is ok at pioneer it will perfome better than pandora v2?
Also are they an upgrade from Brunhilde?
@@kostakisxwl9642 You can take without any problems Dwarv clone, but choose the "experience" cloners e.g. SXK or YFTK. Don't buy any most cheeper clone. Dwarv it is quaite simple construction and the clone manufacturers will match. I have a clone and it works perfect
The chamber plate is like a spica pro features to adjust the throat hit, but in pandora it screw and control when open up the chimney.
Thank you Nonton very well explained
Finally lol! Great review too!
I'm a bit bummed you said the Bishop isn't intense. I bought it because I want intense warm flavor with my fused coil.
Will ask though, how's the Pandora compared to the Dvarw?
Thanks Ali. Both are excellent, I tried to explain the differences in delivery of flavour, the Bishop produces defined & rich / warm flavours and the Pandora has that punchy flavour combined with the noticeable throat hit, it does not mean it is better just somewhat different. If you try both you would know what i mean. The Bishop is still my number one in the mid budget category, as a overall excellent MTL RTA but not by any big margin over the Classic and now the Pandora V2. The Dvarw is on higher league over the above in all categories.
@@netvaper that's great man especially since I have shipped to me two Dvarws two Artemises (you rated it top league if it wasn't to reverse threading) and two Bishops, Aromamizer classic, and Tauren. might have to sell the Tauren and get a Pandora v2 lol.
I'm starting to get a bit sick of the expromizer v5 tbh.
@Ali Srour the Artemis produces excellent flavour indeed if not for the reverse threading i would have used it daily i wonder how would you get on with it😊 As for the ExV5 i did not bother the V4 & V1.4 are way better
@@netvaper yeah man I love your reviews and how honest they are. I even found the vacuum and leaking issue with the expromizer v5. Will wait for the Pandora v2 to go cheaper than 50$. Best of luck Nathan and keep up the great work.
P.s. thanks for answering all the questions I drowned you in Lol.
@Ali Srour any time, i enjoy interacting with other like minded MTL enthusiast😊
Good review again Nathan. Neat looking RTA
Thanks Lyn.
echo from umbrella mods is a really superb rta for 90 euros ecellent mtl vape and looks
Is that the one that is made entirely from Ultem & PCTG
@@netvaper YES EXACTLY i have the one in peek and its an awesome rta flavourwise its up on the top with my highend i got
will see
Great review, in my opinion bishop looks better. I got the black one based on your review and its %100 my first choice now.
Nice, what else do you have or tried?
@Deniz Ugur. Thanks. the Bishop look very elegant indeed. enjoy it
@Ali Srour. Every one has their own personal taste and preferences so one can choose from all the MTL RTA's the one that appeals to them the most. So much so, that i know a guy who prefers the Aspire Neeko to any other MTL high end or low end. For him the Neeko is the best option.
@@netvaper yes but I like to gather opinions to form a general picture. Me for example I prefer the Siren v2 with a 3-3.5mm round coil over the Expromizer v5
Hey Net Vaper, you need to screw it into the chamber. Good video & all the best for this year!
@Ulli S. Thanks i will try your suggestion. Happy new year to you too
very nice Great video. Thank you 😊
Thanks MichePi
Great review as always
I’m thinking to buy the pioneer so what you think ? Pioneer or pandora v2 or something else?
I’m flavor chaser
Thanks. the answer depends on your preference. The Pioneer delivers very sharp flavours but only if the wicking is done right the Pandora V2 on other hand delivers nearly as sharp flavour but the throat hit is stronger and easier to wick & better build quality
@@netvaper
Thanks a lot
One more thing
Would you pls make a video about the tanks steel
You know there is a kinds of steel that’s not healthy enough for us to use
In other hand there is 316 or 316L which is ok for us
I know I’m not clear enough but i hope you understand me ☺️
Last thing
There is quite vapors watching your channel from Iraq 🇮🇶
We really enjoying your vids
@Baghdad Library I actually did a review on different types of coil wire, i hope that is what you mean. Link here ua-cam.com/video/J8XMbU_nmS0/v-deo.html
@Baghdad Library. Thank you
Sir, i'm confused. which one better, Pandora V2 or Alberich V1?
because Alberich V2 does not available here in Indonesia. thanks in advance.
Edit: I’m already have B3 MTL RTA, and Brunhilde MTL RTA. is it worth it to add those two?
Well, there are two questions you need to ask yourself. How many MTL RTA do I need to be happy or How many do I want!! The Pandora V2 is fantastic & hassle free, the Alberich is fantastic as well but needs a learning curve otherwise you might experience some minor flooding issues especially when re-filling
Another very nice and accurate review. I'm interested if you may tell us please 2 more details: which NET is better for this RTA (blondes. dark, mixtures...)? and have you noyiced bad retirnd of black condensate ("cooked" liquid) inside the fresh one? I have faced this problem with Bishop and Spica pro after1 ml appered black liquid traces in the fresh one.
Thanks Andrei i use this one mainly with darker NET's like the Bafometto by LT. If you notice black streaks in the liquid it is time to change the cotton or the coil if used for over 4 weeks constantly. I personally do not wait for theses tale tale signs as I re-wick every 2 days on blond tobacco & sometimes the same day after 2ml on the bolder ones.
I think it's a chamber reducer, supposed to improve flavour but I don't have one so cannot say if successful.
Thanks djs. I will try it next wick change but apparently it does not make any difference
Another great review! Have you ever considered trying the Patibulum MTL RTA By Holy Atty? Another high end mod im sure you'll love!
Yes Joshua i have heard about the Korean Patibulum MTL very difficult to get an original i was tempted to try the SXK clone
Get the clone then! I hear the Patibulum unleashed (version 2) has bad reviews compared to the first version. I might buy a clone also depending on your review if you ever decide to get one! Your reviews are what I rely on the most compared to other youtubers. Continue doing what you're doing. I'm sure alot of people rely on your reviews too. Cheers!
sounds crazy but i got rid of the sound by turning the dial between the numbers instead of directly on a number
Thanks for that Daren
I salute you sir.
Thank you Syed
@@netvaper Dear Nathan, I'm facing an irritating issue with my Pandora V2. I usually draw through 1.2/1.4mm slots intermittently while working, but when I leave it alone for about a couple of minutes, both my devices - a Centaurus DNA 250c and a Thelema Solo - prompt me whether it's a new coil or an old one, more often than not. This doesn't happen with my Bishop or Trio. I've tried re-screwing the 510 connector to no luck. I've checked the Yachtvape authentication for my atomiser, it's legit. This issue's been bothering me since I bought it. The store I bought it from won't replace it, neither do I want to go through the hassle to enforcing my warranty rights. I leave out the chamber reducer as I like my coils a bit higher which, combined with the punchy flavour, delivers a much desired throat hit as you very accurately pointed out. I fell in love with this tank after buying it on your recommendation, even more than my Bishop. But it's a shame that such a bothersome issue is marring my experience with it. Any suggestions, sir?
@@SyedMahmud88 Did you notice if the ohm’s read is bouncing up or down.it sound to me as somehow the coil is loosing contact with the mod & re-connecting prompting the mod as a new coil. Did you check the deck screws that they are fully tight. Or maybe one of the coil legs is partly cut. Insert a new coil and see if the issue has gone.
@@netvaper It worked! One of the coil legs was cut out of proportion, fixed it and also changed the deck screws. The ohm read had been fluctuating, but not anymore. Thanks boss!
@@SyedMahmud88 perfect thanks for the update
I wanted to recommend this channel to a friend, but he already watches lol!
Nathan by the way, do you still reach out to the Tauren elite pro? It's getting reviews that it's a good tank, but seems a bit lacking in the flavor department. I saw your videos but just checking if it's still being used.
Well Ali yes i still use it on occasion as the general vaping experience with THC Pro is good but since i started using the Pandora V2 in addition to my other excellent MTL's and as off late the AIO's & bridges that I enjoy, the THC was neglected somewhat.
@@netvaper yeah mine is definitely getting sold the moment it arrives. Bishop and others I ordered look much more promising. Though I do kinda like the drip tip the thc comes with lol
Hi i have watched your videos alot lately on MTL and NET Juice and im now going down that road i wondered if i could ask you what you prefer to use coil wise in the parndora v2 ? Love your reviews
@Elliott Back i either use pre-made naturevape coils 1.0ohm core clapton 28+38ga Ni80 or Kanthal round wire 26ga 6-7 raps 2.5mmID that i rap myself 0.8-1.0ohm
@@netvaper thank you for the advice i really appreciate it coming from someone like yourself a master of the MTL, just ordered my self some with the help of nature vape as well. Thank you for your detailed videos on building i wouldn't be as good as i am now without your videos.
@@unknowndeath829 I appreciate your comment
Hey thanks for the great videos. Between this one and the THC Elite Pro MTL RTA, which one would you recommand? Right now I have a berserker v2 but it leaks.
Nvm I got my answer at 40min ! Thanks !
@vivelespoulpes. Great 👍
So which one?
Hello, I just discovered your channel and it makes me one of the best on UA-cam, you have very good reviews, congratulations, keep it up, you already have one more subscriber even though I don't speak your language, I use UA-cam subtitles and I'm trying to see most of them of your reviews. (Sorry if it's misspelled, I used Google's translator to write to you). Congratulations again.
Might you help me? I want to start with mtl atomizers, I've been vaping for 7 years now, but mtl rta so far no, the closest thing to an mtl rta would be pods, but I can't decide which one to choose, my options are Pioneer, Neeko, Pandora V2, Expromizer v1.4 and Siren V4, which of those would you recommend? or any other recommendation? I'm looking for a pod-like hit with a good throat hit and flavour, for example I really enjoy the caliburn 1 right now. Thanks.
@H. Ayala thanks. As for you list they are all very good MTL RTA’s but if you are looking for throat hit & good flavour the Siren V4 is top candidate. The Pandora V2 & Neeko are equally excellent & sleeker designed. As an all rounder go for Neeko or the Pandora they are both easy to build & maintain with very smooth airflow & excellent flavour
@@netvaper I really appreciate your recommendation.
I will keep an eye on your work on the channel, thanks.
Have a great day!!
Hi! Wich one would you say has a better flavor between pandora v2 and berseker b3?
Very much similar on flavour but airflow is smoother on the Pandora
I'm having the same problem as grimmgreen had. It produces a "sad moan sound" when I vape. Does anyone know how to fix it?
@Enson keep the coil at a straight level as I have done in the close up. Coil up and legs straight not coil down & legs up
Dear Nate,
It looks very similar to Bishop as you mentioned. I am very happy with my Bishop. I am thinking about the purchase of Kayfun Prime. Many MTL RTA reviewers say that Kayfun is above all else. Is it worth buying? Your recommendation will be decisive for me.
Thanks in advance🙏
@xiaomijournalist Journalist. If your budget allows you to spend on a Kayfun Prime I fully recommend it, as it is one of the best MTL RTA's for flavour and smooth MTL drew. The build quality would last for years. Just a word of caution do not drop it on a hard surface as the airflow ring & housing are delicate.
@@netvaper Thanks for your reply. I will go for it :)
Lots of love🙏
@NET Vaper I got my Kayfun Prime Dark Sill today. It's fancy and the taste of the liquid is stunning :)
I have two questions. Kayfun Prime doesn't work on Paradox Mod. Mod says to check the atomizer. I've tried many things, like wicking correctly, etc. Still doesn't work on it.
Are you struggling with the same issue with your Paradox?
I use it on another mod. But the tank (Kayfun) is a bit warm when I vape. Is it normal?
Thanks in advance🙏
Loved the review! What do you recommend for fruity flavours 0 nicotine? Bishop or pandora?
I wanna buy one for my vaporesso px80 to make it mtl and i usually vape fruity liquids 0 nicotine. (Dont know what to buy between expromizer, bishop, pandora v2, berserker mini v2 and ares)
@Lone Walker. Both are excellent it is down to your personal preference if I can buy only one I would choose the Bishop but that is purely my own preference
As for your list on your 2nd comment it is down to 3 Pandora V2 bishop & Aromamizer Classic. The classic delivers the strongest throat hit. I personally would have a dilemma between the classic & bishop. Probably I would buy both😊
@@netvaper i liked pandora more for its design. Many friends told me that bishop isnt so good on fruity flavours. Is there any difference between pandora and bishop? Any plus on one or the other?
As i said the wicking method on the Bishop is what does it for me. But as with these excellent RTA's the flavour is superb on all of them with tiny margins if any. So if your heart leans towards the pandora V2 do not hesitate as it is excellent MTL RTA that i enjoy nearly daily.
nice video, one question, can 3.0mm coils be used? thanks, greetings from Mexico.
Thanks Chrystian yes you can but If you want to lower the coil nearer to the airflow or if you install your coil opposit way meaning coil down legs up you need to make sure the coil does not touch the post on either side. I imagine it will be a tight fit
@@netvaper and can they be used with 70/30 liquids? with low coils, for example that one that comes from 0.6 ohm or less? Thank you
Hi , it’s a great tank , I’m pro in vape and wicking but when i come to fill it and close the top cap it leaks from the airflow so i fill it from the bottom , what is the solution for this problem , can you make a wick totorial please. Your follower from Iraq 🌹
Hi Ayad i use the Pandora with the bell cap so it is a bottom feeder as well. You must keep the cotton ends fairly long & wide to cover the whole juice well and long enough to reach the deck but not too long they fold. When you fill from the top the pressure of the liquid sometimes can lift out one cotton end when it is too short causing leaking. I can record a close up of me wicking the Pandora & email it to you via google drive it that helps.
@@netvaper sir I’m waiting for the video if you don’t mind 🌹
@@netvaper bro did you forget me ?
@@ayadaltikreety6942 Actually I did sorry 😞 You need to email me first as I don’t have your email
@@netvaper ok sir I will email you now 🌹
I also own the pandora v2. I have a question, wicking related. I recently got 29gauge kanthal and build 2.5mm id 6 wraps, because i want 1.5ohm so to vape at 10watt - 3.74 volt. The problem is that when i used to build with 28gauge kanthal, it didnt loose its shape while wicking, but with the same amount of cotton the 29gauge almost gets destroyed. Does thinner coil suppose to need less cotton or it's just harder to wick it. If the latter, any tips?
@zafoulis. 29g is super fine wire so when you force the cotton through it can easily out shape the coil. I use 26g Kanthal for my own rapped coils so I can insert a bit thicker wick. The problem with very fine wire coil is that if you need to insert thicker cotton to fill a bigger juice well to avoid flooding you are limited due to the coil tender nature. I don’t see any advantage in super fine wire as a MTL coil can be between 0.8ohm to the ideal 1.0ohm that you can achieve by a 26g 5-6 wraps on 2.5mm Id.
@@netvaper the problem is that with even 28gauge, the down limit watts needed for the coil to not underperform are high enough to have unpleasant throat hit for me. I can't vape higher than 11 watts with ease and also I can't lower the nicotine, currently 12mg nic salts 50/50, or it won't satisfy me enough to get away from cigarette. In addition, higher VG ratio seems to sweeten the taste of vape and i dont want that too. On the other hand, more than 6 wraps doesn't have enough space between each wrap making it too big for the airflow under the coil in pandora v2(i only like very stricted draw, so i use the 0.8mm hole). I also found that only with spaced wraps i can chain vape 2-3 draws without getting too dry vape, whereas 7 wraps without spaces (because only without spaces is not too big for the deck) cant get more than 1 draw with ease.
@@zafoulis it is all sound too complicated. Simplify things a bit. I use mainly pre-made 1.0ohm core Clapton coil by naturevape (UK) on 16w with 70VG30PG tobacco liquids (NET) with no too strong throat hit or harshness. You can insert an airflow reducer I showed it in the review to make you airflow even tighter. Vaping is meant to be easy and straightforward so the best way is to buy some pre-made MTL 1.0ohm coils that should do it😊
@@netvaper thank you for your effort haha, I'm just too complicated my self I guess 😝. Btw, about the reducer, i cant seem to find it somewhere in stock, I'm from Greece. Any suggestions of where i could order one, would be welcomed too!
@@zafoulis Not easy to find it on its own. Have you tried yachtvape website. Copy & paste, PANDORA MTL RTA V2 BOTTOM AIRFLOW INSERT.
Hej, im just starting with all this, and Pandora it is my first rta. I think we have a similiar taste in liquids. Do you recommend to simply buy more of this same coils - mtl fused clapton 2.5mm,0.8?
@sanda D. Yes a 0.8 ohm is a perfect MTL coil and in many types of liquids a fused clapton brings out the flavours better then a Kanthal round wire.
@@netvaper great! Can you recommend also another sexy rta same dimensions or shorter for buy next for another liquid? Also, i saw some people saying that is drip tip so important for experience, and that ceramic drip tip is way to go. Can you recomend some drip tip, like at least in design if not material. This pandoras drip tips are strange to me. Maybe i need to get used to it..
Well Sanda there are many RTA’s that I reviewed perhaps the Bishop with the new top fill cap is a similar looking and size & very good quality. As for the drip tip the main thing it should be narrow bore for MTL drew & comfortable to you, everything else wouldn’t make much of a difference to your vaping experience
@@netvaper hej, last q :D how much i can expect that fused clapton to last? Seems like it burned in 7days this one fused clapton which we have got with Pandora. Is that ok? Im vaping on 16w like you.
@@sandaDru defiantly not ok. A good quality coil should last a few weeks & longer. When you change your cotton dry fire you coil and dip in cold water then dry fire again & dip again in water & dry fire again, your coil will be as new. I clean my coil every 2 days and i change every 4-6 weeks. it would have last longer. Check out my tutorial i have done ages ago ua-cam.com/video/ct4GJgzNm3o/v-deo.html
Hello, What exactly does the Chamber plate do?
Hi Cem as I explained in the review it blocked one entire row of airflow hols so the airflow can be fined tuned to even more restrictive MTL drew by turning the external airflow ring in conjunction with the airflow wheel that controls the airflow under the coil. It is really for these who like a really tight drew. For most the large existing airflow options is sufficient.
what are your top throat hit mtl atomizers? thanks
The ones that I come to mind this minute are Mid budget Siren V4 - Aromamizer Classic- Alberich. THC Pro High end Dvarw-Taifun GT one-Penodat V2-Fev. I am sure there others that might come to me later😊
I want to buy new art so do you recommend bishop or pandora?
@ Hany Borsali. Both are excellent although the Pandora delivers a stronger throat hit. It is your personal preference on design and price. If you choose the Pandora without the bell cap the bishop 4ml option looks better and hold more liquid. If you choose the Pandora with the bell cap both look amazing but the Pandora holds 3ml and bottom fill whilst the bishop now has top fill cap. Flavour wise both are amazing. Now you need to choose
@@netvaper thank you my dear
Watch mike vape review you will find out how to use the extra peace!
Thanks Alireza I will.
Hi, recently discovered your channel and enjoying your reviews. I've been vaping DTL on-and-off for 3 years with my trusty old Smok X-priv Baby with mesh coils - making huge clouds, but now I want to have a dedicated MTL RTA to vape on salt nic flavours. After watching some reviews, I'm leaning towards Pandora2 (that spin-wheel seems simple enough) or Aromamizer Classic (one reviewer said that its flavours are more intense than Pandora2), although budget clones like 415 or Millennium RTA are also a possibility, cause they are super-silent. But after watching your earlier review of Arbiter Solo and your "Best of 2021" video, I'm now properly split. Which one would you personally go with for a daily MTL RTA to perfectly replace the smoking sensation but also be simple enough for daily use - Pandora2, Aromamizer Classic or Arbiter Solo? or would you recommend something else?
Hi Garen the Pandora is really good MTL & easy to wick & coil and with the bell cap it holds 3ml and gorgeous looking also the flavour is excellent and the airflow is the best of the 3, the only fact you should be aware of that with the bell cap you need to insert liquid by turning the cap upside down and fit the liquid nuzzle between the glass & chamber (bottom fill). The Aromamizer is a bit more tricky to use daily as the deck is a plug in design. The Solo is a more of a traditional look and very sturdy and easy to use as a first MTL. In my opinion if you don't mind the bottom fill of the Pandora choose the Pandora with the bell cap as the bell cap is what transforms the design and gives it the push look.
@@netvaper Thanks a lot for the elaborate reply! After writing that comment I saw your review of the Bishop... and WOW, that is one impressive RTA. I don't care about the looks really. What matters is that it is really SILENT, and so SIMPLE. Silence is a big factor for me, cause my DTL mesh makes a hell of a turbo noise and it is distracting even for myself when I'm working. The only drawback of Bishop is that it's bottom filling. If it had top-fill with screw-&-slide system, and chamber adjustment like in Spica Pro, then it would be THE perfect MTL. So my new question to you is:
Is the flavour on Bishop as good as Pandora2 ???
(if it is, then I think I'm gonna go with Bishop, as they are pretty much the same price).
And question 2: Which one would you personally choose for daily MTL if your only choices were Pandora2, Bishop, Arbiter Solo and Aromamizer Classic?
First Garen you can buy these days a top fill cap for the Bishop. As for your last question well I would choose the Bishop…and the Pandora😊
the bell cap looks hidious for me.. the original crown like top with 2ml is waaaay better imo. So much easier to fill than bottom..
Well Beken we all have our personal taste & preferences i actually love the look of the bell cap as for bottom fill i have other bottom fill RTA's so i am used to it. but each to is own i suppose
vote pandora v2 or tauren elite pro ?
Pandora V2
@@netvaper why?
Cuál es mejor ,Pandora v2...bishop..... berserker b3 ?
D3 KIL3R 91. En mi opinión, Bishop y Pandora V2 coinciden estrechamente, el B3 es el menor de los 3 enumerados.
@@netvaper gracias por responder 😊
the plate screws inside the chamber
Thanks yoda
You screw the chimney cap into the bell using your tweezers. It doesn't make any difference whatsoever though.
I've had the Pandora V2 for a few days now. I like it, but I can see why MTL purists wouldn't due to the smaller airflow options not really being tight enough. I use mine on the 1.2mm setting and it works great for me. As a vape though, I'm not sure whether or not I prefer it to the V1 yet!
Nice one though mate.
What are your favorites?
@@Skywalker37ful my favourite RTAs? At the moment my favourite is the Steam Tuners Edge. Of all time, there are too many! The Atmizoo Tripod is my favourite, as well as the original Kayfun Lite. Like I said though, I have a lot that I use regularly!
Thanks Raspa for the info as you say it does not make any difference so i will not bother to figure it out. I am not sure what you mean in regards to tight airflow option as you can dial it down to the 0.8mm i can hardly vape it on that setting
@@netvaper I just meant that I found the tighter airflow settings to be too vague, and not particularly defined. I've only had mine since Wednesday though!
@@Skywalker37ful my favorite is bishop, for net liquids its great. I hardly vape fruits these days but when i do i prefer dvarw.3rd atty in the rotation is flash 17mm it is great with net liquids and delivers almost cold vapor.
Neeko or this?
@Lutgardis. The Neeko is solid & easy to wick & smooth drew & excellent flavour. The Pandora V2 I very much the same & with the Bell Cap looks high end (although bottom feed with the Bell Cap) it is really your call on price & what appeals to you most visually. Both are a worthy buy.
Only bad for my taste i see here is the small juice capacity
Some MTL RTA’s do have larger juice capacity but 3ml with the Bell Cap is good enough for MTL.
QR code @ 3:41
Web addresses @ 3:49
Web address @ 20:31
@That Canadian Vaper Guy. Thanks for pointing out my failings on YT new regulations. I will certainly try harder henceforth 😊
I bought it and I'm frankly disappointed, when you want to do tight mtl cigarette draw you get hot, impossible to chain vape compared to a kayfun more than 2014 I frankly regret having it bought this stew it has a good rendering of flavors at 2.0 on the wheel and 5 holes on the base, but with this setting we are no longer in tight mtl, at 17w coil at 0.82 kanthal 0.40.
@Mario Florentin I vape mine on 1 hole at the base & 1.2mm on the wheel with the 26g MTL 0.6 ohm coil supplied on 16w, perfect MTL without no heat and i can chain vape all day long & the flavour is superb. Maybe you lowered the coil too low, i kept mine straight as shown in the close up. it is one my favourites now. I hope you sort it out as this MTL is amazing
@@netvaper Great, I reassembled my coil which was too close to the airflow, the roulette at 1.2, a hole on the base and it works like hell, and I'm in mtl, thank you friend and good vape.
I am happy you sorted it out. Enjoy