Thank you for fixing my dad’s watch, i can’t wait for it to arrive and that i can wear it. Its very cool to see how you work on it and you did a amazing job! Greetings. Jason
@@thestig007 I got my BB58 on now as we speak. It's my everyday watch too even though it's my most expensive. These things were made to be worn, not framed.
The story behind this watch is so elevating. It is so nice that Jason values his Dad's watch so much..and his wife is a pearl. Beautiful that the watch made it back to Jason from his Dad's friend.
I clicked on the video to give a 'thumbs up' in support of the channel... and just watch the beginning and the end... because let's be honest, the disassemble and reassemble are all pretty similar. However, every time I start a Wristwatch Revival video, I end up watching the whole thing... I ask myself "why?" It's Marshall's passion for his hobby as heard in his commentary throughout. So entertaining! Amazing work! 👍
Oh my. I’m getting ready to send my 1984 Tudor Submariner 94010 in for service. This is such great timing. Thanks for the view into what’s about to happen to mine.
What a coincidence Marshall. I have the exact same watch left to me by my late father which he hardly wore, so is in absolute mint condition. It runs really well but have no idea when it was last serviced if at all. I was a small boy when he bought it ( I am 71 now) and remember going into a jewellers on the island of Jersey off the coast of France. He smuggled it back to the UK sewn into his underpants so he didn't have to pay the then import tax. I can't really remember what he paid for it at the time but I am sure it was less then fifty pounds. I hardly ever wear the watch now which is a shame I suppose. Really, really fascinating to see how it all bolts together though. Thank you very much. Mine still has the original 'pip' by the way which you mentioned in your video. He also left me an Omega Seamaster 300 'big triangle' model which is in the same mint condition which he bought in a similar way.
As well as both being of sentimental value for you, they’re not only historically important watches but they’re very collectible and would be worth a significant amount of money. Especially if they are in as good a condition as you mentioned. I’m sure you know all this given your reference to the big triangle variant. I hope you have someone significant in your life to pass them on to. It would definitely be worth getting them both serviced by a well regarded, independent watchmaker.
Tudor/Rolex should be ashamed for rejecting the restoration of this watch. You, however, did a great job and a great service to the owner. By the way, I too went to Vietnam for a tour and an extension (USMC.) Before leaving the country, I went to the PX to buy a watch that would be durable and waterproof. I was 20 years old and did not know crap about watches. I did see the Rolex's, but they were expensive, but not in hindsight. Instead, I bought a Zodiac Sea Wolf ($45 +/-) which I wore for at least 15 years before I threw it in a drawer. I had it serviced quite a while back and still wore it once in a while, but have since given it to my nephew who will make it part of a small collection that he has. I know he will care for it. Meanwhile, I'm now wearing a Rolex GMT Master II (16713) which likely cost 50 times what I could have bought it for in the late '60's I figured I deserved it.
But can you imagine how much this would cost for them to restore? They are rejecting these for a reason (cost, parts, staff experience). If I brought my rusty old 93 Ford ranger to ford for a repair and restoration and had an unlimited budget they'd tell me to go elsewhere... They aren't specialists in everything.
I can't really imagine that this always happens, especially if it is to be sent to Biel or Le Locle in Switzerland. The only thing that can be is that it might be really difficult with original parts. Rolex guarantees every buyer that spare parts will be available for their model until at least 35 years after(!) the model is no longer sold. Sure, the watch here is older, but I don't know anything like that here in Germany. Rolex and Tudor really do a good job at restoration and are always interested in stories. I was already surprised at the Rolex Explorer, which was flooded with seawater here on the channel some time ago. The thing is, a original restoration at Rolex or Tudor is expensive. I mean really expensive on a watch like this here for example. Maybe that is the Problem.
@@volvo09LOL did you just say Rolex is worried about cost?! They make a 300% profit on every single watch, and limited editions make many times more than that. They sponsored friggen Formula One for years. By the way, you realize they charge for the service, right? It's over $1,000 for a service.
Wow, what an interesting and deeply moving history behind this watch!! I'm a huge fan of modern Tudor watches, but it breaks my heart that they wouldn't service this heirloom for Jason. Also, Jason's wife is a one-of-a-kind. Absolute a keeper!! Lucky for us we have this fantastic video and the story is going to be heard by thousands of watch enthusiasts around the world. How cool is that!!
Rolex doesn't stock parts for models much older than 20 years, and if there is a certain percentage of non OEM parts they won't service the watch. The bracelet and bezel might be enough for a service refusal. Not disagreeing with anyone just stating some of the facts.
@@Notfiveo0 Not true. It's always been the same dynamic. It was just Tudor used to use Rolex parts back in the day, but they manufacture their own movements or use Swiss branded movements now. My Tudor has to go to the Rolex AD for service. They are still part of the same group, just separate companies like Lexus/Toyota. So they still are connected. From AI: No, Tudor and Rolex are not the same company, but they are sister companies owned by the Hans Wilsdorf Foundation
When the service center can’t/won’t fix it, send it to the professional hobbyist. Fantastic job Marshall. I absolutely love the way those vintage hands and indices look in contrast to that black dial. As someone who likes building/modding watches, I wonder what could be brushed onto new hands to achieve this look. I feel like coffee would be too brown.
@@citizaniac149 Not with my watch. It's a 25 year old, battery operated, Casio watch; analog. Everyone I've talked to seems to feel that it's beneath them. I'm the original owner and it means a lot to me, and it's in serious need of servicing and cleaning, But, noone want to mess with it. That's why I reached out to this guy. I even offered to pay him. I'm not expecting him to make a video about it, I just want my watch worked on by someone who knows what he's doing. Maybe it could last another 25 years.
@@jshound1508 a lot of these UA-camrs are swamped with projects naturally. It’s hard for them to talk to everyone. Have you looked into repair videos to see how difficult it would be to learn how to do it?
This was a joy to watch, and im over the moon for Jason and family that they get to enjoy the beautiful watch and have his father memories so close. So fantastic.
Please never stop making these videos. I look forward to them. I recently purchased my first watch, Rolex Date Just, and plan to get the Tudor 1926 next year to celebrate my 40th birthday. Thanks, Marshall!
I’m ten minutes into the video and it’s already one of the best stories I’ve heard you tell. I love your videos and rarely comment but had to on this one. You’re also one of my favourite UA-cam channels too!!! Thank you for ALL your content.
I’ve watched several of your videos in just a few days, as I only recently found your channel. I am fascinated by how watches are made, your skills, and all of the cool tools. This is a hobby I wish I had started years ago. But, I don’t think I can do it now. I don’t have the stability in my hands like I used to, and being an avid tool guy, I’d have to get all of the tools and equipment you have and probably couldn’t afford it now. But I’ll live vicariously through you. I do restore electric guitars and try to pay attention to the little details that make a restoration become great instead of just good, such as the tiny screw you polished in another of your videos. Thank you for bringing us into your shop and allowing us to enjoy the satisfaction you get from your hobby.
Just a note about the Navy's UDT. They became the Navy Seals around 1964. In 1961 I was a Marine stationed at the Infantry training base on Camp Pendleton. I got to know one of the UDT guys who used our base for some training. They trained and acted like the Seals of today. One evening I walked past there Quonset Huts and saw them doin pushups. My buddy had broken his arm in training and was still doing one arm pushups. Tough guys
In 2016 I participated as a guardian on an honor flight (in case people don't know, is where they take WWII, Korean, and Vietnam Veterans to Washington DC to see the memorials in their honor) my Veteran was a former Navy UDT, his job on D-Day plus one was to dive in the waters on Utah Beach, and salvage anything of use, and blow up anything in the way. Henry was a great man, sadly he passed away in October of that same year.
Similar experience with my local Rolex AD. They said Rolex wouldn’t take my Tudor date-Day because it was ‘vintage’ (gifted to my grandfather in 1975). So their in-house watchmaker got it running, but after a year it stopped again. Thanks for this great video!
ABSOLUTELY LOVE YOUR CHANNEL!!! What a great restoration! If I already didn't have fifteen (15) hobbies I would take this one up. You inspired me to find one of the US Army Watches from the 50s and 60s to honor my dad. Keep up the great work.
Just looking at the crud built up on that watch I would have guessed the owner was a Vietnam Vet who wore it on operations. My dad was an Aussie advisor over there, 69 to 70, with an ARVN Cav unit, and I have his issued ' Mickey Mouse ' watch which no longer runs. It's probably filled with dirt and sweat like that one. I will take it to a watchmaker one day, and hopefully he'll do as good a job as you did. Excellent work Marshall, very well done!
Amazing that you can identify and reconstruct thing mechanism without confusing any parts, and not having any parts left over! Love the result; nicely done!
This channel showed up at just the right time in my life. I legit started a new job at a jewellers recently and know nothing about watches and jewellery. I have also been made Tudor brand ambasador so these videos are extra helpful
Marshall - you are the best teacher of watch repair skills and techniques I have ever known. The effort you put in to turn out such professional videos is very apparent to me and enormously appreciated. Thank you!
I was just curious. At the 40:18 mark it looks like the right side of the watch isn't pressed all the way down. Is that intentional or just a bad camera angle?
So glad to see this one "up" and running. There is something special (in my opinion) about a watch that has been on one man's wrist every single day for so many decades.
Thank you for all the beautiful videos. I really like it when as much of the patina as possible is preserved. Danke für all' die schönen Videos. Ich mag es sehr, wenn so viel wie möglich von der Patina zu erhalten bleibt.
Just incredible Marshall, you're a true magician! I have a circa 1949 IWC left to me from my father (from his father) that he wore every day for decades. It seems to be in great condition so he must have had it serviced. I get it into the rotation every so often when I'm feeling nostalgic.
It’s kind of disappointing hearing how often Rolex denies servicing one of their vintage pieces. Why would we pay the exorbitant price for one and when a relative inherits it, it’s almost impossible to have it restored…if not for fine people like you! We purchase them for their longevity and timekeeping accuracy. Stand by your product no matter how old.
I have been watching your channel off and on for quite some time. You do a really great job at both explaining what you are doing and with your videography. It really makes a difference for your audience. Well done!
Marshall, I’ve been binge watching all of your videos for at least a week now. Love all the content, I’ve started to name the parts myself. Now looking forward to stepping into this hobby. Thank you for the great content!
Ok. Have to admit I am a bit shocked that Marsall didn't remove the insert and placed it in the heated ultrasonic as one piece. There goes the original tritium in the pip.
Beautiful Marshall, wonderful to go on this journey with you and see it brought back to life for many more years of enjoyment; I'm new to the Tudor brand so was initially disappointed they weren't willing to assist, though you did reference why so does make sense and meant we all enjoyed the 'restoration' with you!
I’m 52 hoping to end the rat race by 60 with above $1M. I know money is a liability to be exchanged for assets with real value like real estate (properties for rent) stocks (dividends) bonds (interest) But, what is it with bitcoin? I hear a lot about it and I'd love to diversify my portfolio.
look at the charts, bitcoin has outperformed every stock and banking product ever developed even after multiple pullbacks over the last decade. not a financial advisor but I know what i'm saying
The key to financial stability is having the right investment suggestions for a diverse portfolio. Many investment failures and losses happen when you invest without proper guidance.
I went from no money to lnvest with to busting my A** off on Uber eats for four months to raise about $20k to start trading with Shellane Maxwell. I am at $128k right now and LOVING that you have to bring this up here
Absolutely loved watching this video. As an owner of a current model Tudor Black Bay, what an insight into the heritage and your skill. Thank you very much.
Thank you for posting these videos, and gave me the confidence to service my first wall clock. The clock belong to my wife's grandfather and is now back on the wall keeping excellent time!
As a guy who's toolbox contains mostly sledge hammers, pry bars,and pipe wrenches I really appreciate watching somebody that can do precision work at this scale. Now I want to see the lathe that turned the threads on all of those tiny screws.
True respect for the skill, craftsmanship, and patience, that goes into this! I thought I was a detailed oriented person but I would lose a part 10 seconds into attempting something like this and would go absolutely insane.
I really love to see you work on these beautiful timepieces, and you’re giving me so much information and inspiration about the whole watch repair process. I started to do some simple things myself now and thinking of getting more serious in this hobby because of your channel. Thanks so much 👍
What a coincidence, as I'm wearing my Tudor Sub as I watch this. The reason I picked it was due to your own 5513 restoration (kicking myself as I sold mine 🙄). Wish I could trust someone to service my Tudor Sub in the UK, with the love and attention to detail in your excellent videos...🫡
So awesome to come in this restoration ride with you Marshal! What a story, what a nice looking time piece and the finish looked amazing. I hope one day I can get me a Tudor like that. Thanks for the video.
What an entertaining almost hour watching this. Thank you, Marshall for taking us along on this journey. Tudor did a disservice to the folks who own the watch. But you did a magnificent job.
Awesome restoration of a watch that's been through so much. Undersea demolition, Navy Seals, a career of policing the streets.Then lost and recovered! Tudor/Rolex rejecting to restore it! You are the watch whispering! What a great watch!
I never thought i would enjoy watching a watch restoration video, but i did! every single minute of it. Dang...wish i have the know-how...looks like a fun "hobby"! thanks for the vid!
Yes! Great job sir! I really appreciate the fact you help restore this as a service member myself. Shame on Tudor for not preforming a basic service before turning this family away.
Thanks Marshall. Your episodes are always so full of intel! Main springs, cannon pinions, keyless works... And who'd have know you shouldn't stick your pallet fork into 'one-dip!' Well, I know now!!
I've been a tinkerer my whole life, I'm currently refining precious metals and have looked at the inside of a lot of Bolivia watches and thought to myself (the tinkerer I am) that would be fun to learn! I enjoyed your show and excellent all the way around from the videography work to your voice-over explanations of different mechanical platforms in the assembly/sub-assemblys. Super 😎! ❤ it! Thanks you.
What a fantastic job you have done! You Sir are a Master Horologist! This video and the repair of the Tutor Submariner owned by a Former UDT Diver amazed me and the story about the watch brought a tear to the eye of an Ex Marine! Thank You and Semper Fi, I wished I owned a watch that was worthy of your work! That was a motivating video!
That's amazing! I've only seen a watch restoration once or twice and this is really mind blowing to watch! What an amazing skill set to have. Great video!
The 7928 is possibly my favourite dive watch ever, precisely because of the UDT/SEAL history. I'm so glad you were able to do the work necessary to ensure the family can continue to enjoy the watch as piece of their history with enormous sentimental value. Great work!
I love that no matter what you always explain everything about each tool etc even though you do it each video. Really helps me learn more about watchmaking. Thank you for the video. Look forward to your next ST36 lesson such as oiling etc.
Thank you for fixing my dad’s watch, i can’t wait for it to arrive and that i can wear it. Its very cool to see how you work on it and you did a amazing job!
Greetings. Jason
Interesting history and that was a long and winding road for that watch. Glad it made through. All the best to you, your family and your Tudor.
Talk about a wild backstory for your Tudor! Hope you enjoy your father's watch!
Oh, BTW, the world thanks your father for his service.
this is not the real acc chat
@@kristoffermangila don't go assuming the whole world thanks him
Wow! First time I see the happy owner comenting on the its own video repair. Happy for you to have the chance to repair your father's watch!
Marshall- the Bob Ross of watch restoration. Don’t ever change 🎉
I had this comment in my mind for sooo long. Also today. Now you did it😄
Seriously - his voice is like a lullaby for adults, it just relaxes me 😅😅
I never thought of it that way. You're absolutely right. ASMR!
Totally true
Not even close.
Sixty years old; worn every day and it is still that accurate. That is quality.
That's why I love high quality mechanical watches. I wear my Tudor every day, and hope to keep it forever.
It made me grin seeing +/- 0 with 300 amplitude after assembly with ZERO adjustment. That could be a Tudor/ Rolex ad!
@@thestig007 I love my Tudor Ranger so much. I hope it'll do as well as this watch.
Wist niet dat tudor ook, van rolex was
@@thestig007 I got my BB58 on now as we speak. It's my everyday watch too even though it's my most expensive. These things were made to be worn, not framed.
Mike's wife is 100% a keeper. I am envious he was able to find such a wonderful life partner. I wish them nothing but the best in their life ^_^
The story behind this watch is so elevating. It is so nice that Jason values his Dad's watch so much..and his wife is a pearl. Beautiful that the watch made it back to Jason from his Dad's friend.
48:59 best one I've seen in ages.I have sent it to all my mates.
I clicked on the video to give a 'thumbs up' in support of the channel... and just watch the beginning and the end... because let's be honest, the disassemble and reassemble are all pretty similar. However, every time I start a Wristwatch Revival video, I end up watching the whole thing... I ask myself "why?"
It's Marshall's passion for his hobby as heard in his commentary throughout. So entertaining! Amazing work! 👍
I jump to the time grapher to see how close 0seconds a day he gets
It’s so amazing how you can do this and remember where every little piece goes. Incredible!
Oh my. I’m getting ready to send my 1984 Tudor Submariner 94010 in for service. This is such great timing. Thanks for the view into what’s about to happen to mine.
What a coincidence Marshall. I have the exact same watch left to me by my late father which he hardly wore, so is in absolute mint condition. It runs really well but have no idea when it was last serviced if at all. I was a small boy when he bought it ( I am 71 now) and remember going into a jewellers on the island of Jersey off the coast of France. He smuggled it back to the UK sewn into his underpants so he didn't have to pay the then import tax.
I can't really remember what he paid for it at the time but I am sure it was less then fifty pounds.
I hardly ever wear the watch now which is a shame I suppose.
Really, really fascinating to see how it all bolts together though. Thank you very much.
Mine still has the original 'pip' by the way which you mentioned in your video. He also left me an Omega Seamaster 300 'big triangle' model which is in the same mint condition which he bought in a similar way.
As well as both being of sentimental value for you, they’re not only historically important watches but they’re very collectible and would be worth a significant amount of money. Especially if they are in as good a condition as you mentioned. I’m sure you know all this given your reference to the big triangle variant. I hope you have someone significant in your life to pass them on to.
It would definitely be worth getting them both serviced by a well regarded, independent watchmaker.
@SlCKB0Y-sb1kg Hi, I really didnt when I first inherited them but appreciate the values in all aspects now. Thanks for your comments. Appreciated. 👍
Have it serviced, because the oil does degrade over time.
Another 'Pulp Fiction" smuggling.
Tudor/Rolex should be ashamed for rejecting the restoration of this watch. You, however, did a great job and a great service to the owner. By the way, I too went to Vietnam for a tour and an extension (USMC.) Before leaving the country, I went to the PX to buy a watch that would be durable and waterproof. I was 20 years old and did not know crap about watches. I did see the Rolex's, but they were expensive, but not in hindsight. Instead, I bought a Zodiac Sea Wolf ($45 +/-) which I wore for at least 15 years before I threw it in a drawer. I had it serviced quite a while back and still wore it once in a while, but have since given it to my nephew who will make it part of a small collection that he has. I know he will care for it. Meanwhile, I'm now wearing a Rolex GMT Master II (16713) which likely cost 50 times what I could have bought it for in the late '60's I figured I deserved it.
Well deserved indeed! Cool story, thanks for sharing.
But can you imagine how much this would cost for them to restore? They are rejecting these for a reason (cost, parts, staff experience).
If I brought my rusty old 93 Ford ranger to ford for a repair and restoration and had an unlimited budget they'd tell me to go elsewhere...
They aren't specialists in everything.
I can't really imagine that this always happens, especially if it is to be sent to Biel or Le Locle in Switzerland. The only thing that can be is that it might be really difficult with original parts. Rolex guarantees every buyer that spare parts will be available for their model until at least 35 years after(!) the model is no longer sold. Sure, the watch here is older, but I don't know anything like that here in Germany. Rolex and Tudor really do a good job at restoration and are always interested in stories. I was already surprised at the Rolex Explorer, which was flooded with seawater here on the channel some time ago.
The thing is, a original restoration at Rolex or Tudor is expensive. I mean really expensive on a watch like this here for example. Maybe that is the Problem.
What a treat! That’s a grail watch for me. What a treat. Thank you Marshall!
@@volvo09LOL did you just say Rolex is worried about cost?! They make a 300% profit on every single watch, and limited editions make many times more than that. They sponsored friggen Formula One for years. By the way, you realize they charge for the service, right? It's over $1,000 for a service.
Wow, what an interesting and deeply moving history behind this watch!! I'm a huge fan of modern Tudor watches, but it breaks my heart that they wouldn't service this heirloom for Jason. Also, Jason's wife is a one-of-a-kind. Absolute a keeper!! Lucky for us we have this fantastic video and the story is going to be heard by thousands of watch enthusiasts around the world. How cool is that!!
When you kept saying "crazy story" then mentioned "Vietnam" I could not get the Pulp Fiction story out of my head.
...and now, little man, the watch belongs to you.
Great, now I have to watch Pulp Fiction again 😂
Thankfully it was not a 44mm Panerai that he had in his "prison safe"
You and everyone else here.
Unfortunately Vietnam was not fiction, a lot of good men lost their lives over there. Respect for these things is becoming very rare.
Not the first time a Rolex/Tudor has been rejected by the manufacturer on your channel, good job on calling them out, love your content man keep it up
Not calling them out. They have much higher standards and knew they couldn't keep them
Today Tudor and Rolex are completely separate companies that have absolutely nothing to do with each other.
Rolex doesn't stock parts for models much older than 20 years, and if there is a certain percentage of non OEM parts they won't service the watch. The bracelet and bezel might be enough for a service refusal. Not disagreeing with anyone just stating some of the facts.
@@Notfiveo0 Not true. It's always been the same dynamic. It was just Tudor used to use Rolex parts back in the day, but they manufacture their own movements or use Swiss branded movements now. My Tudor has to go to the Rolex AD for service. They are still part of the same group, just separate companies like Lexus/Toyota. So they still are connected.
From AI: No, Tudor and Rolex are not the same company, but they are sister companies owned by the Hans Wilsdorf Foundation
When the service center can’t/won’t fix it, send it to the professional hobbyist. Fantastic job Marshall.
I absolutely love the way those vintage hands and indices look in contrast to that black dial. As someone who likes building/modding watches, I wonder what could be brushed onto new hands to achieve this look. I feel like coffee would be too brown.
I tried to. He never responded...
Why not use an independent watchmaker? There are plenty that would be happy to help!
@@citizaniac149 Not with my watch. It's a 25 year old, battery operated, Casio watch; analog. Everyone I've talked to seems to feel that it's beneath them. I'm the original owner and it means a lot to me, and it's in serious need of servicing and cleaning, But, noone want to mess with it. That's why I reached out to this guy. I even offered to pay him. I'm not expecting him to make a video about it, I just want my watch worked on by someone who knows what he's doing. Maybe it could last another 25 years.
@@jshound1508 a lot of these UA-camrs are swamped with projects naturally. It’s hard for them to talk to everyone. Have you looked into repair videos to see how difficult it would be to learn how to do it?
In Marvel character, someone should go to the Tudor service center and shout "Marshall serviced this in a cave! With a box of scraps!"
This was a joy to watch, and im over the moon for Jason and family that they get to enjoy the beautiful watch and have his father memories so close. So fantastic.
Best 50 minutes of my time spent today. Thank you to you and Jason for letting us enjoy this. I've subscribed.
Thanks! I learn so much in your videos! More importantly, it’s therapeutic! I think I get almost as much satisfaction as you!
Please never stop making these videos. I look forward to them. I recently purchased my first watch, Rolex Date Just, and plan to get the Tudor 1926 next year to celebrate my 40th birthday. Thanks, Marshall!
You are SO good at VO. You convey the emotions of the moment amazingly, it seems just like you are narrating in real time.
Sat at work at Heathrow airport watching your brilliant videos ... This one the finished watch looked awesome..thank you
Is this why a million people came into the U.K. last year?
Safe journey!
Definitely one of the best and most interesting episodes yet. Nicely done Marshall 👌🏻
This channel is pure entertainment, this man is a genius at telling a story. Wonderfull!
Martin is awesome!
@@gan_the_white I agree!
Marshall, your videos are not only educational, they are inspirational! The macro shots are spot on and naming of parts and explanation is superb.
Watching you repair watches is one of my crazy little hobbies.
I’m ten minutes into the video and it’s already one of the best stories I’ve heard you tell. I love your videos and rarely comment but had to on this one. You’re also one of my favourite UA-cam channels too!!! Thank you for ALL your content.
What a great story. Thankfully there's great people like you who will do what manufacturers won't.
I’ve watched several of your videos in just a few days, as I only recently found your channel. I am fascinated by how watches are made, your skills, and all of the cool tools. This is a hobby I wish I had started years ago. But, I don’t think I can do it now. I don’t have the stability in my hands like I used to, and being an avid tool guy, I’d have to get all of the tools and equipment you have and probably couldn’t afford it now. But I’ll live vicariously through you. I do restore electric guitars and try to pay attention to the little details that make a restoration become great instead of just good, such as the tiny screw you polished in another of your videos. Thank you for bringing us into your shop and allowing us to enjoy the satisfaction you get from your hobby.
Another AMAZING video! Thank you for bringing this hero's watch back to life. Shout out to the awesome wife as well.
I am a Vietnam Vet and I appreciate your dedication to preserve something he carried with him all those many years good job..
Just a note about the Navy's UDT. They became the Navy Seals around 1964. In 1961 I was a Marine stationed at the Infantry training base on Camp Pendleton. I got to know one of the UDT guys who used our base for some training. They trained and acted like the Seals of today. One evening I walked past there Quonset Huts and saw them doin pushups. My buddy had broken his arm in training and was still doing one arm pushups. Tough guys
In 1945 they were D-Day frogmen no?
In 2016 I participated as a guardian on an honor flight (in case people don't know, is where they take WWII, Korean, and Vietnam Veterans to Washington DC to see the memorials in their honor) my Veteran was a former Navy UDT, his job on D-Day plus one was to dive in the waters on Utah Beach, and salvage anything of use, and blow up anything in the way. Henry was a great man, sadly he passed away in October of that same year.
Similar experience with my local Rolex AD. They said Rolex wouldn’t take my Tudor date-Day because it was ‘vintage’ (gifted to my grandfather in 1975). So their in-house watchmaker got it running, but after a year it stopped again. Thanks for this great video!
Do I have any knowledge of watches? No. Did I still watch all 49 minutes of this video? Yes
Speechless with the quality of your work. Simply amazing!
Another hour of my time I'll never get back. And I enjoyed every minute!
Since you will carry the memory with you it's not as though you lost that time. :D
ABSOLUTELY LOVE YOUR CHANNEL!!! What a great restoration! If I already didn't have fifteen (15) hobbies I would take this one up. You inspired me to find one of the US Army Watches from the 50s and 60s to honor my dad. Keep up the great work.
That was an amazing restore.
Just looking at the crud built up on that watch I would have guessed the owner was a Vietnam Vet who wore it on operations. My dad was an Aussie advisor over there, 69 to 70, with an ARVN Cav unit, and I have his issued ' Mickey Mouse ' watch which no longer runs. It's probably filled with dirt and sweat like that one. I will take it to a watchmaker one day, and hopefully he'll do as good a job as you did. Excellent work Marshall, very well done!
I really love your videos and this particular story was simply amazing! Thanks!
That is an incredible origin story of the watch!
Amazing that you can identify and reconstruct thing mechanism without confusing any parts, and not having any parts left over! Love the result; nicely done!
Awesome as Always Really love the History Thankyou for such a cool Vid
33:35 you make this part look so easy. Cap jewels are the bane of my watch making existence.
This isn't just watch repair, it's therapy.
This channel showed up at just the right time in my life. I legit started a new job at a jewellers recently and know nothing about watches and jewellery. I have also been made Tudor brand ambasador so these videos are extra helpful
Your videos are literally the highlight of whenever I come to youtube. This beautiful Tudor didn't disappoint! Bravo!
There's no need to say literally when it doesn't add anything to your sentence.
You are a true artisan... beautiful work and great story told so well.. thank you! From the UK
Excellent as always. Would you be willing to explain your 'Time Grapher', and what all it
does? And, what does amplitude mean? Thanks in advance.
Marshall - you are the best teacher of watch repair skills and techniques I have ever known. The effort you put in to turn out such professional videos is very apparent to me and enormously appreciated. Thank you!
I was just curious. At the 40:18 mark it looks like the right side of the watch isn't pressed all the way down. Is that intentional or just a bad camera angle?
noticed that too, it bothered me.
So satisfying to see an artist revive a piece of someone's family history. Well done.
Absolutely wonderful work done as usual. Great job sir 🤙🏻
So glad to see this one "up" and running. There is something special (in my opinion) about a watch that has been on one man's wrist every single day for so many decades.
I'm surprised you didn't replace the O rings in the crown and tube. Is there a reason you didn't or was it done off camera?
Thank you for all the beautiful videos. I really like it when as much of the patina as possible is preserved.
Danke für all' die schönen Videos. Ich mag es sehr, wenn so viel wie möglich von der Patina zu erhalten bleibt.
Can I ask is there a more suitable material for tweezers, since it scratch the surface at 23:10?
Yeah, brass.
@@Gr33nMachine83 so the scratch is acutally from the brass tweezers?
@@Weasel4Fun no a professional watch maker would use brass tweezers. But that's just plain clumsy.
Thanks for sharing, I have a 90’s Tudor and loved watching it opened up and looking at the finishing. Great job :)
Respect to the King of watchmaking videos!
I love these videos. Watching a watch being repaired and restored and the skill it takes to repair it is an awesome thing to see.
Oh no, a new rabbit hold to get lost in. This is my first watch repair video and I’m from the coffee world.
Oh god, say goodbye to a lot of hours watching Marshall
Just incredible Marshall, you're a true magician! I have a circa 1949 IWC left to me from my father (from his father) that he wore every day for decades. It seems to be in great condition so he must have had it serviced. I get it into the rotation every so often when I'm feeling nostalgic.
It’s kind of disappointing hearing how often Rolex denies servicing one of their vintage pieces. Why would we pay the exorbitant price for one and when a relative inherits it, it’s almost impossible to have it restored…if not for fine people like you! We purchase them for their longevity and timekeeping accuracy. Stand by your product no matter how old.
What a beautiful watch and an even better story. I appreciate you sharing this with us. Incredible work and restoration!!
23:41 your tweezers scratched the bridge
I have been watching your channel off and on for quite some time. You do a really great job at both explaining what you are doing and with your videography. It really makes a difference for your audience. Well done!
$124,- in 1964 is $1,231,- today. Given the prices of Tudors now, this was not a bad deal.
Marshall, I’ve been binge watching all of your videos for at least a week now. Love all the content, I’ve started to name the parts myself. Now looking forward to stepping into this hobby. Thank you for the great content!
Ok. Have to admit I am a bit shocked that Marsall didn't remove the insert and placed it in the heated ultrasonic as one piece. There goes the original tritium in the pip.
Tritium has a half-life of 12 years so there won't be too much left anyways.
@hannesoehman yes I agree its dead but with vintage its all about originality.
Beautiful Marshall, wonderful to go on this journey with you and see it brought back to life for many more years of enjoyment; I'm new to the Tudor brand so was initially disappointed they weren't willing to assist, though you did reference why so does make sense and meant we all enjoyed the 'restoration' with you!
I’m 52 hoping to end the rat race by 60 with above $1M. I know money is a liability to be exchanged for assets with real value like real estate (properties for rent) stocks (dividends) bonds (interest) But, what is it with bitcoin? I hear a lot about it and I'd love to diversify my portfolio.
look at the charts, bitcoin has outperformed every stock and banking product ever developed even after multiple pullbacks over the last decade. not a financial advisor but I know what i'm saying
The key to financial stability is having the right investment suggestions for a diverse portfolio. Many investment failures and losses happen when you invest without proper guidance.
I went from no money to lnvest with to busting my A** off on Uber eats for four months to raise about $20k to start trading with Shellane Maxwell. I am at $128k right now and LOVING that you have to bring this up here
As a newbie, what do I need to do? How can I invest, on which platform? If you know, please share. I'm new to this, please how can I contact her?
Can't share much here, I take guidance from ‘Shellane Maxwell’ a renowned figure in her industry with over two decades of work experience.
Absolutely loved watching this video. As an owner of a current model Tudor Black Bay, what an insight into the heritage and your skill. Thank you very much.
Thank you for posting these videos, and gave me the confidence to service my first wall clock. The clock belong to my wife's grandfather and is now back on the wall keeping excellent time!
You are amazing. As was already said, shame on Rolex for not wanting to service this watch. But, I'm thankful that we got to watch you do it 😂
As a guy who's toolbox contains mostly sledge hammers, pry bars,and pipe wrenches I really appreciate watching somebody that can do precision work at this scale. Now I want to see the lathe that turned the threads on all of those tiny screws.
Thanks Marshall! 😇 A watch worthy of your effort. A follower since your early UA-cam episodes from across the country (Naples FL).
what a beautiful story of this watch. i'm so happy you were able to do the watch justice. great job marshall.
Absolute stunner and an even better story behind the watch too. Amazing!
True respect for the skill, craftsmanship, and patience, that goes into this! I thought I was a detailed oriented person but I would lose a part 10 seconds into attempting something like this and would go absolutely insane.
I really love to see you work on these beautiful timepieces, and you’re giving me so much information and inspiration about the whole watch repair process. I started to do some simple things myself now and thinking of getting more serious in this hobby because of your channel. Thanks so much 👍
First watch repair video I’ve ever viewed and I’m now hooked! Very nice work!
What a coincidence, as I'm wearing my Tudor Sub as I watch this. The reason I picked it was due to your own 5513 restoration (kicking myself as I sold mine 🙄). Wish I could trust someone to service my Tudor Sub in the UK, with the love and attention to detail in your excellent videos...🫡
Maybe ask Mike from @MyRetroWatches
He's in the UK
Good day from Norfolk, UK. Wow! what a story, what a history and now, what a beautiful watch. Well done Marshall. Regards from Roy.
So awesome to come in this restoration ride with you Marshal! What a story, what a nice looking time piece and the finish looked amazing. I hope one day I can get me a Tudor like that. Thanks for the video.
What an entertaining almost hour watching this. Thank you, Marshall for taking us along on this journey. Tudor did a disservice to the folks who own the watch. But you did a magnificent job.
Awesome restoration of a watch that's been through so much. Undersea demolition, Navy Seals, a career of policing the streets.Then lost and recovered! Tudor/Rolex rejecting to restore it!
You are the watch whispering! What a great watch!
I never thought i would enjoy watching a watch restoration video, but i did! every single minute of it. Dang...wish i have the know-how...looks like a fun "hobby"! thanks for the vid!
Love how this turned out. Beautiful work.
Yes! Great job sir! I really appreciate the fact you help restore this as a service member myself. Shame on Tudor for not preforming a basic service before turning this family away.
Thanks Marshall. Your episodes are always so full of intel! Main springs, cannon pinions, keyless works... And who'd have know you shouldn't stick your pallet fork into 'one-dip!' Well, I know now!!
Another brilliant video Marshall. Love your channel and your reverence for the history of your craft.
I've been a tinkerer my whole life, I'm currently refining precious metals and have looked at the inside of a lot of Bolivia watches and thought to myself (the tinkerer I am) that would be fun to learn! I enjoyed your show and excellent all the way around from the videography work to your voice-over explanations of different mechanical platforms in the assembly/sub-assemblys.
Super 😎! ❤ it! Thanks you.
Such an amazing watch story. Excellent restoration!
What a fantastic job you have done! You Sir are a Master Horologist! This video and the repair of the Tutor Submariner owned by a Former UDT Diver amazed me and the story about the watch brought a tear to the eye of an Ex Marine! Thank You and Semper Fi, I wished I owned a watch that was worthy of your work! That was a motivating video!
I'm amazed that you have all these small parts and can just take apart and reassemble. A joy to watch! Keep up the great work!
That's amazing! I've only seen a watch restoration once or twice and this is really mind blowing to watch! What an amazing skill set to have. Great video!
The 7928 is possibly my favourite dive watch ever, precisely because of the UDT/SEAL history. I'm so glad you were able to do the work necessary to ensure the family can continue to enjoy the watch as piece of their history with enormous sentimental value. Great work!
I love that no matter what you always explain everything about each tool etc even though you do it each video. Really helps me learn more about watchmaking. Thank you for the video. Look forward to your next ST36 lesson such as oiling etc.
Great history for a beautiful watch. Awesome restoration!
What a fabulous watch. It’s a pleasure to see your videos. Thank you.
Fantastic story and an impressive restoration, thanks for letting us see this!