How to build an iMow garage | STIHL DIY

An iMOW® garage will protect your STIHL iMOW® from rain, wind and weather during the mowing season: In this video you will find out how you can build a practical and decorative garage for your robotic lawn mower in just a few steps.
Learn more about the STIHL robotic mower iMOW®:
www.stihl.com/STIHL-power-too...
And about the GTA 26:
www.stihl.com/STIHL-power-too...
Required material:
- Square timber of 60 mm x 60 mm for posts, 2.5 m
- Construction wood 50 mm x 30 mm for the frame, a good 7.5 m.
- Construction wood 44 mm x 22 mm for holding the boards on the back wall
- 70 mm x 12 mm boards on the back wall and from the storage compartment, a good 7 m. Dimensions: boards on the inner wall 740mm x 70mm x 12mm; outside / back wall 608mm x 70mm x 12mm
- Remaining wood for the 30 cm high spacer and for fixing the posts
- 18 mm plywood / multiplex for roof, floor and doors from storage compartment door: 260 mm x 250 mm x 278 mm x 175 mm; Floor 740 mm x 309 mm, roof: 740 mm x 333 mm
- Metal rod 1 cm with a slightly pointed end as a support, 95 cm long
- 15 mm OSB board, 1150 mm x 820 mm
- Roofing felt
- 40 Wood screws 4 x 70 mm (for the frame), 60 wood screws 4 x 35 mm (for the back boards), 3 x 16 mm (plastic edges from the roof and tension lock), 4 x 40 (including washer)
- 2x 10 cm hinges for the roof including wood screws 3 x 16 mm and 4 x 45 mm
- Two smaller 50 mm hinges each for the door of the storage compartment including wood screws 3 x 16 mm
- Tension lock made of stainless steel 74 mm long for the lid
- 20 mm x 25 mm PVC rectangular angle
- 4 mm metal drill bit
Required tools:
- STIHL GTA 26
- Cordless screwdriver
- Spade
- Bevel (angle to measure)
- Spirit level
- Hand auger
- Hacksaw
- 4mm metal drill bit for the support rod
Thanks for watching. Did you like our video? If so, feel free to like this video and subscribe to our channel.
---
Facebook: / stihl
Twitter: / stihl
Instagram: / stihl
Website: www.stihl.com/
#chainsaw
#woodwork
#howto
#lawnmower
#tutorial
#diy
#buildshed
#gardenshed
#craft
#gardenproject
#STIHL
#imow
#GTA26

[@TurnerHolm]

I just ordered an imow evo 6. Will this also fit my mower?

[@Stihl]

Hello! Thank you for your comment! We're not quite sure how we can assist you. Do you mean if a iMow 6 EVO fit in into a garage? Unfortunately, we don't offer garages ourselves, but you can build them yourself according to the size of your iMow.

[@apoyu1]

Hej hvad er målen?

[@maksim82tallin]

wind protection? hardrain with wind?

[@Stihl]

While this iMOW®garage offers protection against wind and rain up to a certain degree, we recommend storing your iMOW®in a dry and secure place inside during extreme weather conditions.

[@christerjohansen4322]

Hei igjen