My 5d iii suddenly won't power on. Sometimes when I pulling out the battery and putting it back makes camera on. Again next time it won't. Tried with different batteries. Same thing. Could you please tell me whats wrong with it? Thanks
sometimes the micro switch near to the battery cover is the problem..it should be open the contact when you close the cover...the micro swictch is normally close position
also clean the battery contacts. luckily, on my 600d i broke the switch in such a way that its always closed. thus it doesnt matter if the lid is closed or not. sure as hell makes life easier. honestly idk why they even bother with putting the switch there
Wow. Are the screws all the same size? Taking apart is one thing, but how you put them back together with so many different screws and small parts is mind blowing. Is there a systematic way to do this?
there are different screw sizes sir..by year of experience in the field of work.. sorting of screw is important from outside and inside also the area where it place...
Sir i have Canon 200 mark ii some day before when i turn on my camera i got error 20 and mirror do some sound then i visit a local service shop, he disassemble my camera and properly clear with a cleaning liquid then he assembled it, now camera is on when i pressed live view button then error 30 is showing, please tell what can i do & whats the problem ?????
Nice repair!Congrats!I have a problem with my 5D3, "cannot communicate with battery" appears.My Canon was faulty,i changed the board from the bottom,now it works perfectly,i only have this problem with communication battery...Do you have an idea or where i could check?
@@exocett8163 i thought that in older board is your concern sir..its battery communication is still appearing in the new board? is your battery is replacement?
@@gideonadziakpor6624 i used its original rivets and lock the replacement blade that i make..i carefully lift the edge of the rivet and avoid breaking it,but doing this i used a microscope..
my canon 5D mark 3 is giving me Error code 20 the shutter will tick 3 times then the screens go's to Error 20 sometimes i can get it to to turn on and go in to live view and if i take a picture the shutter will drop and it looks like it gets stuck it go's all the way ticks 3 times stops ticks another 3 times then shoots back upward then Error Code 20
@@nickwrotenphotography879 if you can disassemble and assemble the camera try to clean the timing switch just be aware to the alignment of the image sensor and the mechanism of the shutter, sometimes the error cause of poor contact of brush of the motor..when i repair the camera i clean the contract of both motors..
Hi Friend, I've a problem with drain battery with my 5D 3...it take 36 hours for the battery IS empty...I replace the MO4 chip,but the problem is still there...😔.Do you have an Idea?
What tools are available for sensor alignment? How much do they cost?
awesome tutorial. others ive found just said to replace the whole part. seemed kinda wasteful when its such a simple part. Thanks 😁😁
thanks for the appreciation sir
Great work, what is the instrument did you used to align the sensor ?
im putting a mark of each side of the sensor before i removed the three screw
My 5d iii suddenly won't power on. Sometimes when I pulling out the battery and putting it back makes camera on. Again next time it won't. Tried with different batteries. Same thing. Could you please tell me whats wrong with it? Thanks
sometimes the micro switch near to the battery cover is the problem..it should be open the contact when you close the cover...the micro swictch is normally close position
@@techxian Thankyou so much. I will check it.
also clean the battery contacts. luckily, on my 600d i broke the switch in such a way that its always closed. thus it doesnt matter if the lid is closed or not. sure as hell makes life easier. honestly idk why they even bother with putting the switch there
@@michal_king478 Much appreciate. I'll try that one as well. Still I couldn't go to a repair centre cos of this COVID lockdown.
Wow. Are the screws all the same size? Taking apart is one thing, but how you put them back together with so many different screws and small parts is mind blowing. Is there a systematic way to do this?
there are different screw sizes sir..by year of experience in the field of work.. sorting of screw is important from outside and inside also the area where it place...
Sir i have Canon 200 mark ii some day before when i turn on my camera i got error 20 and mirror do some sound then i visit a local service shop, he disassemble my camera and properly clear with a cleaning liquid then he assembled it, now camera is on when i pressed live view button then error 30 is showing, please tell what can i do & whats the problem ?????
there a problem with the shutter assembly of yoir camera sir..
Good work
thank you sir for the appreciation
Nice repair!Congrats!I have a problem with my 5D3, "cannot communicate with battery" appears.My Canon was faulty,i changed the board from the bottom,now it works perfectly,i only have this problem with communication battery...Do you have an idea or where i could check?
may be the chip at the bottom board is deffective...
@@techxian the bottom board is new...
@@exocett8163 i thought that in older board is your concern sir..its battery communication is still appearing in the new board? is your battery is replacement?
Wow very nice
how do you copy the shutter blade??
i use the damage blade and put it to the pvc sheet then trace it to shape of the blade that been damage
but then how are you able to reattach the blade to the curtain??
@@gideonadziakpor6624 i used its original rivets and lock the replacement blade that i make..i carefully lift the edge of the rivet and avoid breaking it,but doing this i used a microscope..
@@techxian makes a lot of sense
thanks
your replies have been very helpful
شكرا لك علي المعلومات القيمة
i dont know sir how to read in arabic ..
Thise cost
my canon 5D mark 3 is giving me Error code 20 the shutter will tick 3 times then the screens go's to Error 20 sometimes i can get it to to turn on and go in to live view and if i take a picture the shutter will drop and it looks like it gets stuck it go's all the way ticks 3 times stops ticks another 3 times then shoots back upward then Error Code 20
there a problem on shutter assembly timing sir if that error 20 is appearing
@@techxian is there anything i can do to fix it at home like leave the battery out of it or would it need to be like open up and repaired
@@nickwrotenphotography879 if you can disassemble and assemble the camera try to clean the timing switch just be aware to the alignment of the image sensor and the mechanism of the shutter, sometimes the error cause of poor contact of brush of the motor..when i repair the camera i clean the contract of both motors..
Hi Friend,
I've a problem with drain battery with my 5D 3...it take 36 hours for the battery IS empty...I replace the MO4 chip,but the problem is still there...😔.Do you have an Idea?
Hii sir
Number sir
Matonta degol