I had '75 f250 with a 390 and I put a rod through the block on the way home from work on Friday afternoon. I found a local shop with a 360 and put the engine in by myself on a gravel driveway at -11f. The only reason the 390 blew is because someone didn't tighten the rod cap bolts on one rod. Thank you for the great work you and your dad do!
Daniel, we seek to enjoy life, each other, and the Old Fords and seek to treat others respectable. I am honored that you watch and comment... God Bless!!
Miss the fun your having with the all the old Ford pickups through the years. All had FE engines except a couple. God bless from Springfield Missouri. Love the videos!
That rattle can rebuild looks awesome under the hood 👍 through trial-and-error you got it running and moving, can't wait to see the final touches. Keep up the good work in the awesome videos. God bless you and all your family 👍✌️🇺🇲
Hey Rev,it was worth the wait for this video! You guys are so enjoyable to watch.Glad that the Ole Man is feeling a bit better with his hand!! This old girl will be a good truck with a little love and the engine looks and sounds great!! Take care and God Bless!!
Greetings from Scotland Rev & Ol’ man. Great video, and an outstanding job from both of you to get it running. It sounds great. I hope you do a follow up on this truck, and show us how good it will look with some spit and polish. Fantastic job gentlemen,… thoroughly enjoyed watching it. Cheers John
When I did my 68 F250 I but the engine back in with the transmission attached and yes I had the front clip all on the truck you just have to angle the tail in first than use a jack on the tranny readjust chains and slide it all back and yes you need a friend to assist. Great video Rev!
Congratulations on the engine swap. Are you trying to get some of these in shape to flip. That truck would make a great old Farm Truck. Thank you Reverend David for the video. God Bless you and the family! ✝️🙏🏻👊
Excellent video Rev :) , Ole Man Eugene :) also got get oil pressure sensor in too and lots fix up still do plus headers hook be better on Clutch pedal also spinning tires better too ! Paint up floor after metal work done use primer then strong paint too!
Rev, I was going to tell ya, I saw where a feller put that plastic bird netting, just layed it on the ground around his house and chicken pen, the snek get caught up in it .. around the chicken pen the snake get caught up and die & chickens eat em
Craigs list rebuild paint it will work. If it runs as nice as it looks its going to be alright. Hey is that HEI off of a Cheverlet??? It does run as good as it looks. I will be happy to hear what it sounds like after you attach the Headers. Look at another 68 to see how the solenoid wiring goes. Your going to need to go buy another 68 ford truck to see how it goes LOL I love that old truck it is a good one.
They make HEI distys for Fords as well, I got the same exact one for mine, but it stopped working, Cheap ebay chinese junk lol. I put my stock one back in with a Pertronix electronic ignition kit in it to replace the points
I put brass like the original has instead of the new roller bearing for the piolet bearing . I barely made it home with my truck and had a bearcat of a time getting it out their no lip so bread trick wont work
I’ve had my 390 in and out 3 times. I never pulled the transmission. I done it by myself and I’m s few years older than you and half crippled . It works fine. Edit, I never put that top starter bolt in. I like puddins fab shop’s theory, it 2 won’t hold it, 3 never would. It’s been in the truck almost 8 years so he’s right
@@RevStoration the only thing I took loose on the transmission was the 4 bolts into the bell housing. I didn’t remove center hump or anything. I jacked the transmission up as high as I could. I slid the motor into the bell housing then sat it down in the mounts. I had to wiggle and shake it a little bit but not over 5 minutes and she jumped in flush.
What I do with all of my automobiles that have standard transmission I pull the transmission with the engine then when I put the engine back in the transmission is on the engine that way I don't have to fight to git it all to lined up it saved me from getting Gray hear lol . you need to get some blue zip ties that way it will look good and with the blue zip ties you will gan 50hp lol
All too familiar with Fords FE motors, I've owned or built 390, 427, 428cj and starters and headers were the bain of my existence. The 390 I built for a friend in his rollback car hauler probably the easiest, no headers. The 427 I owned was in a 66 Mercury Cyclone GT with four speed manual. The 428cj was in a 67 Fairlane GTA and I had it longer and did more to it. Motor was far from stock and high compression of 13.7 to one it ate starters.
I like what y'all do work when the old vehicle special Fords especially when you and your dad spend time together me and my daddy to spend time together my dad's Dodge van that's cool Father and son spend time together Play Jesus name amen
Rev I keep a cloth tape measure in my tool box for measuring for fan belts. Saves time and confusion. Please a few prayers for guidance in this world Please and thank you and God bless
love the ol fe's youtube ch i watch here in Aussileand is [PETE ANDERSON ] loves his OL Henrys ,ecently he got an ol fe 352 but he measured stroke its a 390 must of put 352 on some of the fe's its a bit of a guess if you follow me . take care REV AND KIN LOVIN YOUR Efforts.
So blessed to still have your daddy. Mine passed away when I was one year old. Wish he was here
I agree on the blessed part.. he is awesome.
Nothing better after a stressful day than a new Revstoration!
Amen brother.
I had '75 f250 with a 390 and I put a rod through the block on the way home from work on Friday afternoon. I found a local shop with a 360 and put the engine in by myself on a gravel driveway at -11f. The only reason the 390 blew is because someone didn't tighten the rod cap bolts on one rod. Thank you for the great work you and your dad do!
Q: What does a ghost eat for dessert? A: Booberry pie, LOL. Sorry
This Chanel and family give me hope that good people are still out there..God bless you as much as you do us...😂
Daniel, we seek to enjoy life, each other, and the Old Fords and seek to treat others respectable. I am honored that you watch and comment... God Bless!!
Some good driving by The Old Man! Great video Rev!
Great to see you and the Ole man working on that cool old truck! It runs great.
Miss the fun your having with the all the old Ford pickups through the years. All had FE engines except a couple. God bless from Springfield Missouri. Love the videos!
That rattle can rebuild looks awesome under the hood 👍 through trial-and-error you got it running and moving, can't wait to see the final touches. Keep up the good work in the awesome videos. God bless you and all your family 👍✌️🇺🇲
I hope you do another video about the truck after you get it all wrapped up, it would be really awesome.
The Ole' man is back again! Great job guys ❤❤❤
Nice to see the truck back to life😊
You guys great . It's great you work with your dad .
Hey Rev,it was worth the wait for this video! You guys are so enjoyable to watch.Glad that the Ole Man is feeling a bit better with his hand!! This old girl will be a good truck with a little love and the engine looks and sounds great!! Take care and God Bless!!
Another fun father son endeavor thanks for the entertainment
I am surprised that after the CBD oil The Ole Man didn’t eat that Reese’s cup lol. Love your videos, God bless.
True... That is why I knocked it out of his hand. He was thinking about it.
Keep on loving one another as brothers and sisters.. Love it. Solid episode. God bless
Hey buddy's good to see y'all again good luck guys
Love it Rev. Always look forward to seeing you and the Ole Man. That 250 is a great old truck.
Lots of hard work but it looks like you guys had a lot of fun getting it done.
It took awhile but you got that 360 running pretty good. You two just have too much fun like me and my brother Ron do lol. Thanks for the video.
You got challenged but you persevering!
Great video, as always!!!!
Challenged and 3 days persevering... Fun times.
Greetings from Scotland Rev & Ol’ man.
Great video, and an outstanding job from both of you to get it running. It sounds great.
I hope you do a follow up on this truck, and show us how good it will look with some spit and polish.
Fantastic job gentlemen,… thoroughly enjoyed watching it.
Cheers
John
When I did my 68 F250 I but the engine back in with the transmission attached and yes I had the front clip all on the truck you just have to angle the tail in first than use a jack on the tranny readjust chains and slide it all back and yes you need a friend to assist. Great video Rev!
Congratulations on the engine swap. Are you trying to get some of these in shape to flip. That truck would make a great old Farm Truck. Thank you Reverend David for the video. God Bless you and the family! ✝️🙏🏻👊
The Ole Man talks about getting rid of some of these, but he never does..
@@RevStoration Well seems he seems to be like my Grandfather. And kept everything. Blessings.
That rattle can rebuild doesn't look half bad. Great video as usual
A Raiders fan used to go to school with his dog... Then they were separated...
His dog graduated!!!
Hehe
Totally enjoying this build series alway look forward to the uploads
Thanks... Hopeful to have it complete in the next one.
@@RevStoration I’m sure it will getting the engine in and running where it can move is most of the battle
I sure enjoy your channel. God bless you all
Another great show. Rev good call on the oild preasure hose, i think i know where my oil is leaking now. God bless.
Congrats to you & your Pops David, Bravo 😎 .
Thanks Rev now let get the floor pan fix nice video
I love this old truck ❤
That's great glad y'all got on each other's nerves.
Love those old fe's great work old man and rev.
Love them old FE’s!!!
Enjoyed as ALWAYS! The old Ford sounds pretty good.
Hello Rev and the Ole Man
Howdy Greg
Love the channel. May God bless you and yours. All my best.
Awesome wasn’t expecting a video today but very pleased to see you guys!
Seek and you will find, unless it’s an Easter egg hidden in a bumper, LOL!
Thank you for the video! I want that old bug😊
Your very welcome now no more snakes
Thanks Michael!
Love old Ford cars for y'all
Good job guys when you get the bugs out that will make a nice truck
God bless you Rev
Why do you keep Crows from using a phone?
Crows make long distance phone Caaawsss...😂😂
I think you're gonna have a nice ride!
Excellent video Rev :) , Ole Man Eugene :) also got get oil pressure sensor in too and lots fix up still do plus headers hook be better on Clutch pedal also spinning tires better too ! Paint up floor after metal work done use primer then strong paint too!
Great job y'all
Man that thing sounds mean,God bless!
Awesome Rev, I’m looking to ship a 55 ford f100 project to ship to the UK . Awesome channel 🤘👍🙏
Working on 70 350 it also has a 360 in it good video thanks 50:41
God bless y'all 🙏🙏
good content mates god bless you all
Cool truck !
Rev, I was going to tell ya, I saw where a feller put that plastic bird netting, just layed it on the ground around his house and chicken pen, the snek get caught up in it .. around the chicken pen the snake get caught up and die & chickens eat em
god love you and the old man
Craigs list rebuild paint it will work. If it runs as nice as it looks its going to be alright. Hey is that HEI off of a Cheverlet??? It does run as good as it looks. I will be happy to hear what it sounds like after you attach the Headers. Look at another 68 to see how the solenoid wiring goes. Your going to need to go buy another 68 ford truck to see how it goes LOL I love that old truck it is a good one.
They make HEI distys for Fords as well, I got the same exact one for mine, but it stopped working, Cheap ebay chinese junk lol. I put my stock one back in with a Pertronix electronic ignition kit in it to replace the points
I’m interested in the old FE that came out of the truck if you want to part with it
I put brass like the original has instead of the new roller bearing for the piolet bearing . I barely made it home with my truck and had a bearcat of a time getting it out their no lip so bread trick wont work
This one was solid like the original a d yes the roller bearing style needs a pulled.. no fun.
I love the Dad jokes 😂
I live fairly close to you up in Morgan county, I’m interested to know if you have any manifolds and a two barrel carburetor for 360 FE.
The Ole Man may.. we will look around @TheOleMan
REV i can't believe it i use the same seat your father has to sat on HA HA GO AT GOD,S SPEED
He should use this truck as his new hauler for pickup vehicles and pulling trailers
Love the truck guys......for sale?
Rocker shaft assembly just like Chrysler lol
Can you belive the grocery prices keep going upscott
That cutoff could be if it had a camper in the back. Camper special
Another one saved from the crusher
I’ve had my 390 in and out 3 times. I never pulled the transmission. I done it by myself and I’m s few years older than you and half crippled . It works fine.
Edit, I never put that top starter bolt in. I like puddins fab shop’s theory, it 2 won’t hold it, 3 never would. It’s been in the truck almost 8 years so he’s right
The automatic transmission and the manual trans is a little different. Is yours an automatic?
@@RevStoration manual 4 speed 4wd
@@RevStoration the only thing I took loose on the transmission was the 4 bolts into the bell housing. I didn’t remove center hump or anything. I jacked the transmission up as high as I could. I slid the motor into the bell housing then sat it down in the mounts. I had to wiggle and shake it a little bit but not over 5 minutes and she jumped in flush.
Few more little tweaks and it'll be a good little truck.
Rev will you all be getting T-shirts anytime soon?
We're did you get the distributor at I need one for my 390
Ebay has a couple companies that make them.. not a bad price either..
Hey guys send that 68 ford my way.
HEE_DOGGIE, u backwoods guy's sure can make alot of noise.. I could hear u'all clear down here in florida.. did i see a white 58 chevy up the hill??
It was loud... very loud and clapping header!
What I do with all of my automobiles that have standard transmission I pull the transmission with the engine then when I put the engine back in the transmission is on the engine that way I don't have to fight to git it all to lined up it saved me from getting Gray hear lol . you need to get some blue zip ties that way it will look good and with the blue zip ties you will gan 50hp lol
All too familiar with Fords FE motors, I've owned or built 390, 427, 428cj and starters and headers were the bain of my existence. The 390 I built for a friend in his rollback car hauler probably the easiest, no headers. The 427 I owned was in a 66 Mercury Cyclone GT with four speed manual. The 428cj was in a 67 Fairlane GTA and I had it longer and did more to it. Motor was far from stock and high compression of 13.7 to one it ate starters.
👍👍👍👍
No cam break in.
It was a used engine
Yep.. it looks rebuilt but we didn't install a new cam.
Why was you running David instead of riding in the truck, you was warring me out watching you
Only one block in the truck..
What does a hog use on a wound?
OINKMENT!
I love it.. I have trouble saying the word ointment.. so oinkment seems rights anyways.
That cutoff is a sign it had a parasitic draw at some point
HEI beats the old dead box man them things will make you pull your hair out
Touche’
Mechanic work would almost make me cuss.
It can be very frustrating... sometimes to the point of creating new words like brugabrugabruga...
One's better with that power by Chevrolet distributor and that forward don't Bud That's what everybody Morocco problem uses isn't forward
It works
I can’t use cbd I’m extremely allergic to marijuana and would wind up going into shock from it the epiPen and hospital
Why did you knock us down for
What was today's sermon
I'm telling you I'll get extra fire from that sheriff like that forward don't know how to act
loving it.
Don't use autolite plugs they auto lite but they don't. Junk plugs
Based on what? 🤣 I suppose he needs some $10/plug iridiums?
I like what y'all do work when the old vehicle special Fords especially when you and your dad spend time together me and my daddy to spend time together my dad's Dodge van that's cool Father and son spend time together Play Jesus name amen
The old man may need subtitles. That is, if he speaks English.
Rev I keep a cloth tape measure in my tool box for measuring for fan belts. Saves time and confusion. Please a few prayers for guidance in this world Please and thank you and God bless
The fans are measured in OD so the cloth tape would work... Awesome..
love the ol fe's youtube ch i watch here in Aussileand is [PETE ANDERSON ] loves his OL Henrys ,ecently he got an ol fe 352 but he measured stroke its a 390 must of put 352 on some of the fe's its a bit of a guess if you follow me . take care REV AND KIN LOVIN YOUR Efforts.
All fe engines are 352 blocks. Bored differently and different stroke.
@@RevStoration oh ok thanks REV
Love old Ford cars for y'all