nice video bud, this engine looks very similar to the engine in my ccm 604ds. your is nice and clean right enough, mines needing fully cleaned properly.
How about a video about how and were to add oil after an oil change on a similar bike.i have a 505 rotax on a J&m frame with reservoir and am unsure were to add oil in the casing and how much.
I go to great lengths NOT to swap out clutch packs during the season, as it requires removing the cam belt and crank pulley (and remote starter assembly). My engine guy does it in the winter during the yearly rebuild. But let me see if I can make something worth watching using the service manual. Thanks for watching!
You're welcome! Thanks for viewing. I didn't mention capacity, as different chassis have different size tanks. This one takes a little over 2 liters. Remember, the engine holds oil as well, so filling the tank will not fill the engine until the pump takes up some oil from the tank. Then you have to top off the tank to the final fill level. It's Motul 300v. Redline is my other go-to oil.
cain sample It’s difficult to say. Dyno’s don’t agree, people exaggerate, builds are different, etc. You’ll hear numbers ranging from about the high 50’s to the low 70’s. They’ll run with a modern 450 on many tracks, so that’s a good benchmark.
Ok thanks....in my last video i raced my cr500r in vintage medium class in ny and all 15 other bikes in my class wer all rotax's....im horrible at the turns n never get any practice n they smoked me in the turns but i stayed with them n even caught up to couple after the straights...i figued they wer 55-65hp thanks✌
Yea i wished i got more practice...only tried it a few times...got one practice there n they wet the track right before i went out...im gonna try a short track in maryland in a couple weeks and theres one in delaware but its expensive and not alot of ppl show up...
couple of questions; where can i buy that case saver? i have 3 ATK rotaxs- some have bypass built into filter such as yours on this video, some do not- filter cap is solid and appears bypass is build into cover- can you discuss? am i correct... is bypass in cover?
@@michaelmueller2955 I am unaware of anyone that retails the case guard. The chan guard/case guard I have was a one-off part made years ago. I will look into having some made (with some improvements) and let you know. The filter does look like it has a "bypass". The cover has a plug and accepts a fitting. It's been used for an auxiliary oil line in previous engine configurations. I use www.elliottpowersports.com for many Rotax engine parts and help. Feel free to contact me here in the comments with any other questions. That's what I'm here for!
Mesin yang ditampilkan dalam video menggunakan satu oli untuk mesin dan transmisi. Saya tidak terbiasa dengan MZ500r, tetapi tampaknya menggunakan mesin yang sama persis. Jadi, Anda dapat menggunakan prosedur dasar yang sama yang saya lakukan dalam video. Terima kasih telah menonton! Saya menggunakan google translate. Semoga berhasil.
nice video bud, this engine looks very similar to the engine in my ccm 604ds. your is nice and clean right enough, mines needing fully cleaned properly.
Rob Let thanks, man! I hope you enjoyed the video, or it helped you out. Or both! Cheers.
Just found this nugget of a channel great content
Thanks! Glad you found some value.
How about a video about how and were to add oil after an oil change on a similar bike.i have a 505 rotax on a J&m frame with reservoir and am unsure were to add oil in the casing and how much.
Clamp the line, either with a special hose pinching tool or with needle nose vise grips. No oil behind the belt cover!
Your videos are awesome! Love your content✌
Thanks! Glad you got something out of it.
Awesome video!
I would love to see a clutch replacement on this bike! Could you do/explain that? Thanks😎
I go to great lengths NOT to swap out clutch packs during the season, as it requires removing the cam belt and crank pulley (and remote starter assembly). My engine guy does it in the winter during the yearly rebuild. But let me see if I can make something worth watching using the service manual. Thanks for watching!
@@FlatTrackFactory thanks for your feedback, it would be amazing to watch the procedure, I hope you can do that!😎
new sprockets n belts needed as well i did on mine n valves
Thanks for the video takes the guess work out of it. Also how much oil did you use and that looks alot like redline
You're welcome! Thanks for viewing. I didn't mention capacity, as different chassis have different size tanks. This one takes a little over 2 liters. Remember, the engine holds oil as well, so filling the tank will not fill the engine until the pump takes up some oil from the tank. Then you have to top off the tank to the final fill level. It's Motul 300v. Redline is my other go-to oil.
some metal tube fell motor fell on my atk605. wint start
mines silver 604 oil comes frm top ocerflow idk why still maybe lil extra
How much hp about do those rotax 600's make? I raced against abunch in ny last weekend and there fast
cain sample It’s difficult to say. Dyno’s don’t agree, people exaggerate, builds are different, etc. You’ll hear numbers ranging from about the high 50’s to the low 70’s. They’ll run with a modern 450 on many tracks, so that’s a good benchmark.
Ok thanks....in my last video i raced my cr500r in vintage medium class in ny and all 15 other bikes in my class wer all rotax's....im horrible at the turns n never get any practice n they smoked me in the turns but i stayed with them n even caught up to couple after the straights...i figued they wer 55-65hp thanks✌
cain sample I watched your video. Good job! Keep at it and you’ll increase your corner speed bit by bit.
Yea i wished i got more practice...only tried it a few times...got one practice there n they wet the track right before i went out...im gonna try a short track in maryland in a couple weeks and theres one in delaware but its expensive and not alot of ppl show up...
What kind of filter is that one at 07:20 ? Thanks!
It's K&N part number: K&N 62-1220
@@FlatTrackFactory thanks!👍👍👍
Small piece of all thread in the hose end would help control the oil mess.....I hope you didn't "fill up" the oil tank.....
I see ron wood stickers👍
Indeed! This bike came from Wood Racing when I was in high-school. We've done many laps together, in many places.
👍.......subscribed
Thanks! Let me know if you have any requests for future videos.
Did I miss something? Have a tip to do this better? Comment and let me know!
couple of questions; where can i buy that case saver?
i have 3 ATK rotaxs- some have bypass built into filter such as yours on this video, some do not- filter cap is solid and appears bypass is build into cover- can you discuss? am i correct... is bypass in cover?
@@michaelmueller2955 I am unaware of anyone that retails the case guard. The chan guard/case guard I have was a one-off part made years ago. I will look into having some made (with some improvements) and let you know. The filter does look like it has a "bypass". The cover has a plug and accepts a fitting. It's been used for an auxiliary oil line in previous engine configurations. I use www.elliottpowersports.com for many Rotax engine parts and help. Feel free to contact me here in the comments with any other questions. That's what I'm here for!
How to gearbox oil change?
This type of engine uses the same oil for the gearbox and engine.
@@FlatTrackFactory how to MZ 500 R Rotax ?
Yes, this is very similar to the MZ500. What is your native language?
@@FlatTrackFactory ok, thanks. Indonesian
Mesin yang ditampilkan dalam video menggunakan satu oli untuk mesin dan transmisi. Saya tidak terbiasa dengan MZ500r, tetapi tampaknya menggunakan mesin yang sama persis. Jadi, Anda dapat menggunakan prosedur dasar yang sama yang saya lakukan dalam video. Terima kasih telah menonton! Saya menggunakan google translate. Semoga berhasil.
How about a safety wiring video?
Coming up!
tube fell off motor tgek stopped bogged down. maybe a metal went or carb thing idk
CDM asks, “Why is the oil green?”
Where do you buy the oil filter for the Rotax?
I use Elliot Power Sports. Tell Eil FTF sent you! elliottpowersports.com/