How to remove the upper intake manifold on a 2007 Hyundai Santa Fe
Вставка
- Опубліковано 22 сер 2024
- Here are some of the tools that jimthecarguy uses
www.amazon.com...
In this video I will show you how to remove the upper intake manifold gasket on a 2007 Hyundai Santa Fe 2 7 liter engine
I cant tell you how much I've saved by watching your videos. Always detailed, step by step. Thanks!
This was one of the best how to videos I have seen on here yet!! I want to thank you so much for making this video! Excellent video, Thank you!!
Good job Jim. This engine is much easier to replace the intake manifold gaskets compared to my Chevy Vortec 4.3 liter.
Hey Jim, I was ready to shell out hundreds to have my plugs changed. Hopefully, after seeing your great video, I will attempt it myself. Thanks for sharing and I will be coming back for reference.
Thanks for watching. I'm happy to help.
Hi Jim, thank you, thank you, thank you. I was able to change my plugs and wires and man, did it make a difference. Even got a new throttle body on it. Wish you were in Charlotte, you'd definitely be my go to guy for repairs. Thank you again for the video and dead on advice.
I'm happy to help. Thanks for watching.
Thank you!! Helped with my Veracruz
What are those two canisters on the left of the manifold
Hi, I was glad you made this video, but the most important what I would like to see is how you removed the bolts at the back, also a video shot from the top would give us a nice view what to expect…. also you do not show that you torqued up the intake manifold bolts at the back… But thanks for making it. 😮
thank you for your another nice video Jim. with your help i was able to replace my serpentine belt of my mazda 3.
Great video
This video help me alot and save some some mony.thank you so much.
Thanks you so much!!
That piece hes lifting and working on is actually the plenum. Anyone know how to replace the gasket on the upper and lower intake manifold? I bought a three piece set of gaskets for this delta engine and only found a way to this plenum, which hes showing in the video. Any help is appreciated, thanks.
Silicone spray vacuum lines that stick, I don’t know how it works but it works, they come off much easier
Thanks for your input.
50s kid on UA-cam
Hey Jim, I was ready to start removing the intake when I noticed the throttle control was literally broken off of the throttle body, aluminum where bracket attaches completely broken off from body. Arrrrg. Going to change plugs and wires while putting on new throttle body.. Wish me luck.
Keep me posted how you do.
I recently replaced sparkplugs on my tiburon gt and never replaced the gasket.Recently discovered a hissing noise from throttle body and wondered why the maf sensor acting up.
Very good...I have this model and year
I am planing to clean the thtottle body but I don't want to remove it, can It be cleaned without bean removed ?
Hi Jim, do you know the name of the black circular part that is attached to the upper left portion of the intake manifold? Is it possible to get that piece by itself without having to replace the entire intake manifold? Thank you so much!
Which way does the gasket go in?
Thanks heeps buddy
Hey Jim, I want to change out my timing chain in my 06 Cadillac STS, do you think it's possible to do with me not being a mechanic and all, but I don't want to spend lots of dollars. So what's your input?
Did I miss the final torque ??
I Was going to change my own spark plugs. Phuck that, I'm not messing with that. I'll let Jim do it.
Jay Zandegiacomo thanks for watching
hyundai 3.8 can the intake gasket make the oil mix with water?
This ^^
Hi Jim,
Good video. However the 12mm bolt under left upper corner of intake manifold is a Allen head bolt...not a 12mm Hexhead. No room to get my L-Shaped Allen wrench under it to loosen from manifold sir. I'm stuck now...Arghhh.
Are you sure I've never seen that before.
@Jimthecarguy - My mistake Jim. The Allen bolt I thought was keeping me from lifting manifold off was actually part of manifold. No worries.
The funny thing is that it says CIA on that intake manifold. I guess the Central Intelligence Agency took part in building this Hyundai... 😄😄
Nick Nicu must be the way they hide the spark plugs
one question for you.
when I step on the brake I fell the brake is a little bit jumping ?
do you know what is wrong ?
If you know it's not the ABS, then it could very well be warped brake rotors. Hope this helps!
Appreciate your work and putting this out for everyone to see and use. However...unless I missed it, I noticed that while you do recommend a certain philosophy about the manner in which you torque down the plenum fasteners, you did NOT make note of the VERY specific ORDER which Hyundai recommends one torques those fasteners. Just a thought.
Mi santa fe 2.7 comenzó con jalones. El scaner me arroja pobre en relanti... Tiene sensor oxigeno nuevo.. cuerpo aceleración nuevo. Bujías y bobinas nuevas... Pero al sacar el colector me percató que tiene la empaquetadura del colector...puede que esa eso que está ingresando aire por eso el sensor de oxigeno me arroja esa falla
Have you work on the 3.3l Santa Fe 07-15
I have a 2007 limited santa fe 3.3 liter. Is that what this is, I didnt see the oil filter on the right like mine. I think mine is a little different then this one. The plastic cover on mine is silver.
I have a slight problem right now 196,000 and its hard to start the car takes a few seconds sounds like it is starving for gas or air or something Not electrical power related it feels like a fuel problem. After it starts runs great. Any ideas what it could be? I was thinking MAP sensor, or fuel injectors or spark plugs. Spark plugs were changes at 100k so they are old but I cant afford to have them done right now.
You may want to run a bottle of Techron fuel injection cleaner through the car. Did you check fuel pressure or scan for codes?
@@jimthecarguy Will try the fuel injector cleaner, didnr see any codes but will check that again.
How change or clean egr hyundai elantra 2007.
Is the sonata similar (can it be removed engine in car?)
Hey jim i changed plugs using your video. Thank you for this video. Recently changed battery and starter on my 07 santa fe. Drove around for a day or 2 and now car wont start. No click or anything. Power comes on but wont try to start or anything. Any thoughts or recommendations? Thanks in advance
Yes the first thing you should do is go down on the top starter and check for power at the main wire and then check for power on the start wire when someone holds the key to the start position. Keep me posted.
I can tell you exactly what it is! It's a known issue on this car. Your Neutral Safety switch went. Assuming you haven't done anything about it in 2 months, what you need to do to diagnose is remove the tiny cover near your shift and press the button to unlock shifting gears, and out your car in neutral and then start it. I am assuming it will work. If it does then that is proof. The part is $40 at the dealer and they have an updated design for it. In the meantime you can continue using the car via just shifting to neutral to start it be be. Hope this helps anyone that comes by this and has the same problem. It's a very common problem.
How many gaskets did you replace?
the whole gasket needs to be replaced.
Not a good video, sorry. Didnt even go over any of the bolts on the back side.
Классно, спасибо за видео.
What do you use to clean the top of the plenum?
At the shop I use the parts washer . You can use any degreaser in the big box store or just wipe it down with a rag.Thanks for watching.
Agregar en español
I had to be the first to comment, finally.
Just get a new gasket
That is for sure never use the old gasket