Це відео не доступне.
Перепрошуємо.
Arrma Vendetta PB 145mph!! | 1515 2200kv, MMX8S, SMC 7600 6S
Вставка
- Опубліковано 28 кві 2023
- The road was long a tough but finally cracked into the 140s. Big Thanks to@KBASHRC for the help along the way.
To pick up some of the parts used to propel this vendetta to these speeds click the links below.
Arrma Vendetta:
amzn.to/3nuXKpu
Castle 2200kv:
amzn.to/41tsVPX
Mamba Monster X 8S:
amzn.to/418sqKQ
Perfect Pass LC:
amzn.to/3nLFrw2
Radiolink Transmitter:
amzn.to/3B1gWhy
GRP Tires:
amzn.to/3NPdSgg
Very nice. Congratulations
You climbing so fast with the new PB..congrats! keep it going bro..
Thanks
Thx for the great vid and great job on the new PB keep it up you’ll be at 160 before you know it thx again
Yes sir 💯
Insane dude! The congrats on the new PB! 🎉
Thanks brother
Great run on 4s! That's not easy. Those HCL lipos are good batteries. I met Kbash the other day. Good dude. Congratulations!
Thanks man! It was a 6s pass here. Really happy with the results and had more room to crack over 150 but needed to hold full trigger a little longer. Looking forward to getting together and having you out at the airfield.
I don't know where I got 4s from. Lol. Great job either way.
Awesome Job buddy!👍👍👌Great pass!
Great passes! Very impressive!
Thanks
You’re just a beast nice PB bro 😎
Thanks!
Great video as usual. I watched your under the hood video but I didn't hear you mention anything about the diffs? Are they upgraded diffs or have the stock held up?
I didn’t when I should have. Running the kraton 4s differential with all steel gears
Awsome runs,go farther thou....for 150s you'll benefit from 4400-4700ft...I had to quik running green body cause I blends in with the grass..blue is working out better for me....your getting better at 3800+ft..extra 800ish feet you'll need...car covers lots of ground at 150...awesome 1515 #'s.didnt hear any steering input👍ya got yourself a hot rod there bud..
Thanks man! Gonna try again in the next week or two. I looked the logs and RPMs are around 31k and my voltage drop was minimal, at 20v. Ripple was at 1.5 and full throttle was for about 1 sec. So yes, she has a little more in it. If I can get another couple seconds in, that would be money.
For curiosity, how did you mount your esc to the vendetta? Because I been trying to find places to put my new esc. ( it mamba monster 8s)
I was able to mount it on the receiver box. That works with the 1515 or smaller. Anything larger and you’ll have to remove the receiver box cut a slot in the chassis and mount it sideways. You can see that setup in my other videos when I added the TP 4070 which is significantly larger than the 1515.
R. ❤ 5:26
What things you changed and where to buy them and please upload video how to change them please
I have some of the things I used in the video description. I recommend leaving the stock axles and driveshaft. I have another video here where I go over the setup a little more but I don’t have a “how to” video. ua-cam.com/video/uMJK8cYYZ1Q/v-deo.htmlsi=bq1t0iQAVbI7KSQd
Awesome pass….what are your shocks set at! I can’t get past 100 before the front end starts to lift
I’m not using shocks. I swapped over to turnbuckles to lock the rear. Works perfectly and saves weight
Hello please number pinion? And spur ??
Thanks
Well done mate!
What Drive Shaft did you say???
The driveshaft is from KaniZRC
How fast would it go if it was an 8s battery?
Likely only a little bit faster. I would have to gear down a good amount but the biggest concern is the axles and driveshaft staying intact with the extra power.
Is that 6s or 8s 7200…?
6s
What teeth are you running on your spur gear?
30t
I really need your help bro
Happy to help. Message me on my IG