All good, the pattern went together very well! adding thickness to any line drawing changes the dimensions a little. Your pattern looks really nice when put together.
I love how Odin explains every step in each video as if it was the first time (i.e. how contact cement works) It is very helpful for new people who haven't seen other videos and helps reinforce techniques for returning viewers
Thank you! That is my thought when making the videos. Every video could be somebody's first video, and there is no official viewing order. The challenge for me is to keep that info useful and quick, for everyone who has seen them before!
@@OdinMakes can you please make a full beskar set and the jetpack. I've watched videos on the armor but I can't find anything on the jet pack. There all 3d printed would love to see one made.outta foam
Finally a pattern that has the right cheek pieces! I have been attempting this for months, including trying to make my own pattern. Excited to try yours.
Yes they are! The pattern I included is the original pattern still. I did modify the pieces a little, but basically if you print them 5% larger or so, you will probably get it. Also, the angle for the cheek bend was 90° on the flat lower panel, and the bevel on the arc was about 2mm in at the start, and about 5mm in on the bottom. Mark out that line on top of your cheek piece, measured from the cut edge, and sand that changing bevel. The flat back panel was on a 45° from the other cheek panel. I cut the bevel on my bandsaw, and then sanded the curved panel to match. It took me 3 attempts of cutting out the pieces, and modifications made as I went along. so something like 3.5 to 4.5 attempts... After sanding the cheeks 'flat' in the face plate panel- the sides had a angle that would let the cheeks fit. I still needed to trim the top edge of the curved cheek for the best fit. That was really the longest part of the build, getting the cheeks right.
@@OdinMakes Thanks for the tips! This helmet is my white whale. I modeled it in blander and made a pattern using armor smith, but I get stuck trying to make the final pattern. I didn't split he helmet top right and it cap out lumpy. I like that you cut the facemask out last. Helps it stay together.
Everyone is making these but this one is by far the best I've seen. The alclaid looks so good on it and really captures the color shifting from the show
Speaking of that... I want to paint a guitar to get the Mandalorian armor effect. Do you recommend the same methods for painting wood? Two coats of black, the Metallic Silver?
Honestly I think you are the first to make a helmet that doesn't like it was made out of eva foam! it looks like metal!! definitely will be using your template
Great build. The Best paint job I've seen. When the light hits the helmet it has a slight blue tint to it light metal when it has been heated. Awesome WAY to paint this.
Dang, Odin! That piece looks like it was ripped straight out of Disney+! Once again, you've done a fantastic job on your video, and I am absolutely stunned by how well this turned out!
You make helmets in the most satisfying ways. I try not to request a bunch of props often. But because I like watching you make helmets, I would like to see your take on a Space Marine's helmet from Warhammer 40k. On the upside, there are several styles of helmets to pick from and you could paint it however you want.
Nice. I put the inner head support thingy from a hard hat inside my Mando helmet. I made it last year from your Heavy Infantry plans. It came up on my Timehop recently and I realised that I’ve STILL not finished it!
this pattern looks so much simpler than one I was trying to use oml, it had a lot of triangles and stuff for the dome which weren't super easy to line up correctly. I think I'll have to give this a try for a new custom helmet :)
The paint job looks surprisingly good. I read somewhere that a pint of the paint originally used on the screen prop costs around 250$... For the cost of it, it looks amazing! Good job Odin, and good job Artman.
I was reading that too. I found the artist that makes the paint, and I found a quart for $400, so that maths about right. It also has lots of extra toxic chemicals in it (like all awesome paints do!) so spraying it needs way more safety than I have in my shop.
Odin you should create a limited quantity monthly maker box with all the supplies required to complete a project, so we can follow along with you during a live stream or even a regular video.
@@jasononeal thanks! Yeah I watched Punished props video on Mando and Boba Fett, and they used 10mm and in the end I thought it was too thick. So I opted for the next size down. And I’d say it turned out pretty well.
@@art_man-jh9vk I made some changes to Punished Props with a few things I picked up from Odin's heavy infantry build. I have moved on to 2mm cardboard and glass/bondo. I may try your pattern to compare to mine. Awesome, and thanks for the conversation!!!
I love this build mate, so cool. I'm looking forward to our helmet Collab! Once the Falcon bench is done and out (very soon) I'll have some progress for ya!
this was an AWESOME build!! i really enjoyed your gundam beam saber and also your rocket inspired custom gun. itd be cool to see you build your own custom lightsaber with a color inspired either by your favorite color or one from a kyber color quiz. i also think gungis lightsaber would be an interesting build to see how you incorporate his natural elements w the wooden handle!!
The helmet turned out great. I like your attention to detail and the patience to make sure the surface is perfect. I would love to attempt making one but it seems the link to the flat patterns is no longer valid. Any chance you can reload the patterns? Thanks
love this mando has been the best star wars thing for awhile so I always love seeing this. Would love to see you try making the gunblade from final fantasy.
Ok first off, ODIN you are the man! I'm working on this helmet now for NYCC in the fall. Question about your suggestion for a planishing stake. I see that you use a plastic punch ladle with two pieces of wood. What glue should I use to adhere these pieces properly so it doesn't come apart (mind you I'm a rookie crafter).
Great build, Odin! I have a question. When printing, what sort of settings do you recommend I use to get the best sized template? Apologies if you already answered in a previous post.
Really? I thought it was a few years ago. I know the 501st does not approve foam as it need too much work to upkeep and look uniform. But last I talked to any mercs the Mando's still were allowed foam materials.
You did a great job, Odin. I do have a legit question, I notice post-paint that you can still sort of see the seam lines on the dome. Is there a method to cover those up to where they are gone entirely?
Sorry if I caused you any frustrations😅 glad it worked!
All good, the pattern went together very well! adding thickness to any line drawing changes the dimensions a little. Your pattern looks really nice when put together.
@@OdinMakes I’m glad! Thank you so much for using my pattern! Gives me a sense of great accomplishment😁
@@art_man-jh9vk good for you
@@OdinMakes how are Theese from hours ago
@@alphattus1503 these*
Thanks for the shout-out Odin!
You bet! Thanks for the idea!
@@OdinMakes no problem!
@@OdinMakes hello there!
@@OdinMakes hi Odin can you make a hunter killer drone from call of duty mobile that flys
Hi jake
I love how Odin explains every step in each video as if it was the first time (i.e. how contact cement works)
It is very helpful for new people who haven't seen other videos and helps reinforce techniques for returning viewers
Thank you! That is my thought when making the videos. Every video could be somebody's first video, and there is no official viewing order.
The challenge for me is to keep that info useful and quick, for everyone who has seen them before!
I like that, too! It's nice and even if you've been watching for a while, it's not assumed!
I always appreciate the build much more when it's shown at the end again compared to when it's shown at the start
Thank you!
@@OdinMakes can you please make a full beskar set and the jetpack. I've watched videos on the armor but I can't find anything on the jet pack. There all 3d printed would love to see one made.outta foam
"but THIS IS THE WAY that Odin makes"
YES
Hahaha, I loved that😂
Perfect. 👌
This is how a person that is totally Spider-Man makes
@@undeadhaiena2926 yes da caaaaattttt
@@notaspideyclone2759 m e o w.
Digging the gray, black and red before the paint went on.
My new favorite build
Thank you so much!
Thank you!
Finally a pattern that has the right cheek pieces! I have been attempting this for months, including trying to make my own pattern. Excited to try yours.
Thanks!
Yes they are! The pattern I included is the original pattern still. I did modify the pieces a little, but basically if you print them 5% larger or so, you will probably get it. Also, the angle for the cheek bend was 90° on the flat lower panel, and the bevel on the arc was about 2mm in at the start, and about 5mm in on the bottom. Mark out that line on top of your cheek piece, measured from the cut edge, and sand that changing bevel.
The flat back panel was on a 45° from the other cheek panel. I cut the bevel on my bandsaw, and then sanded the curved panel to match.
It took me 3 attempts of cutting out the pieces, and modifications made as I went along. so something like 3.5 to 4.5 attempts...
After sanding the cheeks 'flat' in the face plate panel- the sides had a angle that would let the cheeks fit. I still needed to trim the top edge of the curved cheek for the best fit.
That was really the longest part of the build, getting the cheeks right.
@@OdinMakes nice!
@@OdinMakes Thanks for the tips! This helmet is my white whale. I modeled it in blander and made a pattern using armor smith, but I get stuck trying to make the final pattern. I didn't split he helmet top right and it cap out lumpy. I like that you cut the facemask out last. Helps it stay together.
"father, i require maintenance." - Mechagodzilla probably
Definitely.
Dang, that helmet really came together really nicely, it’s looks as if it’s directly from the show
@Orion 556 thanks! And I agree the paint they chose was perfect!
Thank you!
@@OdinMakesc
Can I give a prop request?
Wait it isnt from the show ?
@@OdinMakes hi can i have the link to the download I can’t find it
Everyone is making these but this one is by far the best I've seen. The alclaid looks so good on it and really captures the color shifting from the show
Speaking of that... I want to paint a guitar to get the Mandalorian armor effect. Do you recommend the same methods for painting wood? Two coats of black, the Metallic Silver?
Honestly I think you are the first to make a helmet that doesn't like it was made out of eva foam! it looks like metal!! definitely will be using your template
Honestly, for the supplies you use, the results are mind blowing.
I know! It’s crazy
Great build. The Best paint job I've seen. When the light hits the helmet it has a slight blue tint to it light metal when it has been heated. Awesome WAY to paint this.
This is one of the best foam versions of this helmet I have seen.
Thanks!
It looks fantastic
Dang, Odin! That piece looks like it was ripped straight out of Disney+! Once again, you've done a fantastic job on your video, and I am absolutely stunned by how well this turned out!
Thank you Marvel Nerd! I am super happy with the results too.
That turned out really good! I'm impressed at how well it fits since the plans were sent to you!
Yeah! I was worried the helmet wouldn’t fit when I sent the pattern!
The finish is absolutely beautiful! All of the sanding, spackling, sanding, spackling, sanding was worth the effort. Very well done!
This is definitely the best Mandalorian helmet I’ve seen on UA-cam
Wow, thank you!
Another great build! I really appreciate the extra steps taken to get the smoothest, seamless finish.
What, on Earth, is wrong with people?!?! How could you give this a thumbs down? Awesome job!
This was an amazing build, God bless everyone here.
It honestly looked cool as hell with just the bare foam
I agree!
That's such a clean helmet! And was made of foam! Truely a great final result👏🏼👏🏼👏🏼
Yay! it's ANOTHER helmet build. I am SO glad there is ANOTHER helmet build.
THIS IS THE WAY !!! you´re helmet is awesome !
Thanks!
Thank you! This is the way!
@@OdinMakes thanks a lot to put me in the video, so happy, big fan .
That Soul Edge sword is so badass
Was TOTALLY hoping for that closing line - as always, Odin does not disappoint! This IS the way.
You are one of the most underrated creators on UA-cam. I love all of your videos, especially the video game ones
I agree!
Wow, thanks!
This is the way... that Odin ROCKS
Thank you!!!!
All your mando helm builds finally got me off my ass to start a project I thought up 14 years ago
Hows that going
@@derickbokhary8241 Helm: DONE
Chest/neck/gut plates: DONE
Hand plates: DONE
currently workin on the bracers
@@NerdyNotionZ cool
@@derickbokhary8241 uploading an update video now
Cool!
That might be the best looking foam mando lid I've seen! Wow!!
Thank you!
18:44 the white, grey, red and black goes really well with the helmet
ODIN!!! It’s crazy! I literally just made one of these. Wish I had this pattern cuz it looks great!!!!
Thanks!
Ohhhh son of a gun he did the thing again.
This is the way........that Odin makes. Love it.
From one odin to another this is the way
You make helmets in the most satisfying ways.
I try not to request a bunch of props often. But because I like watching you make helmets, I would like to see your take on a Space Marine's helmet from Warhammer 40k. On the upside, there are several styles of helmets to pick from and you could paint it however you want.
Very true! And a Space Marine helmet is not oversized like the rest of the armor!
23:49 That stare into the camera perfectly conveys that you've done did an oof.
Amazing result! I think this might be the best mando style helmet I've seen you make. Loved seeing the little modifications too! Great work!
Thank you! I felt less rushed, because I had great pattern to start with.
@@OdinMakes thanks for the complement😁 I tried to make it as best I could.
I will watch this with great interest.
The helmet actually looks pretty cool in the colors of the EVA foam. Great work, Odin!
You're a legend sir
"NEVER have that thing down, in front of me. How do I know you're not making faces at me behind it?!" --President Skroob, to Dark Helmet, "SpaceBalls"
I love the cheap welding helmet visor replacement thing. I think that was a great move
You are gonna need a hell of lot of Beskar to cover those moobs. Nice build!
It really did turn out very smooth. Very cool
Thank you Gerry!
The Man-da-Odin!
Nice. I put the inner head support thingy from a hard hat inside my Mando helmet. I made it last year from your Heavy Infantry plans. It came up on my Timehop recently and I realised that I’ve STILL not finished it!
It looks fu*king badass in black version too.
This is the Way!
This is the way.
Odin you have deffinatly been my inspiration to commiting my life to prop building thank you
:)
this pattern looks so much simpler than one I was trying to use oml, it had a lot of triangles and stuff for the dome which weren't super easy to line up correctly. I think I'll have to give this a try for a new custom helmet :)
Thanks! I tried to make it as simply as I could!
I literally just finished making one, wish I had this pattern before I started!
The paint job looks surprisingly good. I read somewhere that a pint of the paint originally used on the screen prop costs around 250$... For the cost of it, it looks amazing! Good job Odin, and good job Artman.
I was reading that too. I found the artist that makes the paint, and I found a quart for $400, so that maths about right. It also has lots of extra toxic chemicals in it (like all awesome paints do!) so spraying it needs way more safety than I have in my shop.
@Man thank you very much sir!
Odin you should create a limited quantity monthly maker box with all the supplies required to complete a project, so we can follow along with you during a live stream or even a regular video.
interesting! Certainly a possibility- I would probably leave out liquids, like glue and paint- postage on that stuff is killer.
Another beautiful build 😎
Thank you!
This is one of the most screen accurate foam versions of the helmet... Thanks
Thanks!
@@art_man-jh9vk I spent weeks trying to make accurate patterns, but used 10mm. I'm going to try your pattern in a future build
@@jasononeal thanks! Yeah I watched Punished props video on Mando and Boba Fett, and they used 10mm and in the end I thought it was too thick. So I opted for the next size down. And I’d say it turned out pretty well.
@@art_man-jh9vk I made some changes to Punished Props with a few things I picked up from Odin's heavy infantry build. I have moved on to 2mm cardboard and glass/bondo. I may try your pattern to compare to mine. Awesome, and thanks for the conversation!!!
@@jasononeal nice! Your welcome! Always nice to chat with fellow builders😁
I made my own mando helmet 2 months ago and it came out alright, yours is wayyyyy better though, it’s really cool to see your process!
Thank you!
I love this build mate, so cool. I'm looking forward to our helmet Collab! Once the Falcon bench is done and out (very soon) I'll have some progress for ya!
Thank you! Yes me too! I plan to get our helmet made in April, or even maybe May 4th?
@@OdinMakes yes sounds like a plan - I will release mine the making of the 3d model at the same time! :)
thanks I've been wanting to make a Mandalorian helmet for a while now thanks
so whats left for the mandolorian? dark trooper? 😉
My cusion recomened this channel to me and I can't beleive how good it is
Thank you!
how does a cushion talk?
Told you
This is a good birthday present
Happy Birthday!
this was an AWESOME build!! i really enjoyed your gundam beam saber and also your rocket inspired custom gun. itd be cool to see you build your own custom lightsaber with a color inspired either by your favorite color or one from a kyber color quiz. i also think gungis lightsaber would be an interesting build to see how you incorporate his natural elements w the wooden handle!!
The helmet turned out great. I like your attention to detail and the patience to make sure the surface is perfect. I would love to attempt making one but it seems the link to the flat patterns is no longer valid. Any chance you can reload the patterns? Thanks
nice mando! very shiny.
You should totally build the Zathura game board from the movie Zathura. It’s something that would fit right in with the rest of your props.
I liked that movie! It seemed to not be that big of a hit, but a fun movie!
THIS IS THE WAY
This guy actually knows starwars unlike the last guy in a video i watched i feel better watching this video instead of that one...
1:38 as soon as I liked the video, this man says “thank you very much”.
Thank you Odin for this awesome Work!
You bet! Thank you!
Great job!
The best mandolorain/boba fett helmet templates that I have found are the Prop Master with Rob Walker's boba fetts helmet series
I’ve never clicked on a video so fast
Big fan
@RJR Productions hey! I saw your Boba Fett video! Super clean outcome! Thanks for stopping by Odin’s channel!
The moment I've all been waiting for
I've been waiting to see you put this one together, great job
Thank you!
@@OdinMakes now if only you would construct skeletors havoc staff from the Masters of the universe movie, and maybe from the animated cartoon
@@bhenderson4390 we just talked about it during the Monday live stream again!
@@OdinMakes I hate I missed that
i like the color scheme at 18:18 I may have to make one and paint it like that.
love this mando has been the best star wars thing for awhile so I always love seeing this. Would love to see you try making the gunblade from final fantasy.
Now that’d be awesome
it came out great!! that's awesome!!
Thank you!!
@@OdinMakes no problem!! i always love your props they're amazing!!
Ok first off, ODIN you are the man! I'm working on this helmet now for NYCC in the fall. Question about your suggestion for a planishing stake. I see that you use a plastic punch ladle with two pieces of wood. What glue should I use to adhere these pieces properly so it doesn't come apart (mind you I'm a rookie crafter).
Hot glue is fine, you'll have to fix it on occasion. I used 5 minute epoxy
"I gotta get one of those" - Din Djarin 2019
Wow, awesome build, such detail with foam! maybe one day you can make a Classic Ultra Seven Helmet?^^
Thanks for explaining how you made the planishing stake -- i was wondering how you made that as soon as i saw it
That's way to awsome!!!!!! This is the way ...can you consider making from the old carton BraveStar, his gun or his sidekick Thirty Thirty's rifle?
Very impressive. Will you please make a lord Zedd’s staff?
Great work - hail Odin!
Make the Kurgan's sword from Highlander - please.
Like Count Dooku said: "I've been looking forward to this."
Would love to see you make some Power Ranger helmets and possibly Lord Zedd head
Great build, Odin! I have a question. When printing, what sort of settings do you recommend I use to get the best sized template? Apologies if you already answered in a previous post.
Same
I’m so excited for the next Mechagodzilla video. Keep up the amazing work Odin!
Same
love this man
Very nice Mando Helmets.
It's unfortunate that foam is not an approved material for use for the MCCC (Mandalorian Mercs Costuming Club)
Really? I thought it was a few years ago. I know the 501st does not approve foam as it need too much work to upkeep and look uniform. But last I talked to any mercs the Mando's still were allowed foam materials.
Projeto perfeito!! Sensacional! PARABÉNS! Tem algum link que funcione para fazer download do projeto?
Would love to see you do the winter soldiers arm
HELL YEAH BROTHER
THIS IS THE WAY
You did a great job, Odin. I do have a legit question, I notice post-paint that you can still sort of see the seam lines on the dome. Is there a method to cover those up to where they are gone entirely?
More putty, more time. Maybe a stronger putty, more than just spackle.
"...get off my lawn. Retirement sucks." I actually laughed out loud at that 🤣
Good! HA!
Excellent
Thank you finally I wanted this so bad
You are welcome!
22:40 i was expecting you to say that and you didn't disappoint :D
doin my best!
Helmet turned out so gorgeous!
..... but where did you get that purple button up shirt?? 👀
Friends bought it for me while visiting Hawaii!
@@OdinMakes aw that's awesome! I was instantly like "WOAH THAT SHIRT IS GREAT!"
Nailed it!