Turn the steering wheel all the way to one side to give you room then take a razor knife and cut a small hole I just made two cuts kind of like the shape of a boomerang each cut was about 5 in Long then you simply pull the flap down that you cut reach in and replace the light bulb replacing both bulbs took me less than 10 minutes you could put a dab of glue to hold the flap in place I didn't think it was necessary to use glue because the flap is rigid and stayed in place by itself
Thanks! Best how to. Sons lights were changed in a snap
I am glad I was able to help!
You did an awesome job describing the process of replacement. 5 🌟's
Thank you!
Turn the steering wheel all the way to one side to give you room then take a razor knife and cut a small hole I just made two cuts kind of like the shape of a boomerang each cut was about 5 in Long then you simply pull the flap down that you cut reach in and replace the light bulb replacing both bulbs took me less than 10 minutes you could put a dab of glue to hold the flap in place I didn't think it was necessary to use glue because the flap is rigid and stayed in place by itself
Thank you. You made my decision very easy. I will pay $23 at Valvoline and not mess with it...
Great video!! Helped me change my lights!
Yay! You are welcome!
I have another video where I changed my oil.
One Woman Show funny you say that, I just watched it and am going to attempt that this week!!
Justin Eberling let me know how it goes!
Your awesome hunny!!
Thank you
You are welcome. I hope my video helped you.
Thank you!!!!
Thanks
Even easier, you dont have to take the wheels off, you can just turn them full deflection and reach right underneath!
That is correct! Thanks for the tip! Since this was my first time, I wanted the extra room.
I too prefer to remove the tire for more room to work on!
Thank you
Great
Per the title, I thought this was a replace the headlight assembly, not replace the headlight bulb.
Sorry for the confusion
Can I use my nephew as the jack stand ?
Of course. If he is Clark Kent.
Do you have to unplug the battery before you replace bulbs?
No. I did not.
The right side of the car is so hard 😢
I apologize I shouldn’t have said that thank u for the video very sorry✊🏽
Yea u didnt have to do none of that. I just did this today. Just take off the bottom screws to the cover and 1-2 rivets and u can reach in
Thank you. I was following another video. I will try it your way if I have to change them again.
Just go up under the wheel well , no need to remove bumper .
That’s what she did
No mames
Your replacing a bulb not a headlight that would have been the complete assembly.
It would be headlight assembly if she was replacing the headlight assembly but she wasn’t
What the f….. is that ? She don’t replace anything
I did replace the bulbs. I took the old ones out and put new ones in.
Horrible video
Thanks for the feedback. It is my first video.
Actually good video, especially being the first
I think it was a dam good video!! Thank you
It was great trying to change my wife’s in the morning best video I saw 5 stars ⭐️ ⭐️⭐️⭐️⭐️
Good sharing