Please I have an ingersoll rand compressor,I have changed all the filters but some times during operation oil gushes out of the air filter?what could be the problem
The compressor isnt running enough. When the ambient air is pulled into the airend (compression chamber), the temperature of the air drastically increases due to heat of compression. Rotary compressors are designed to run continuously, which causes moisture in the air to stay in vapor form . When they only run for a brief time, the hot air then cools, which allows the water vapors to condense and mix with the oil. You more than likely need a piston compressor instead. If you keep the rotary, change your oil more often.
@@mattfleskes6359 this pair of R7.5i supply the DEF system on a tier 4 tugboat. After troubleshooting, changing the MPCV solved the problem. These are definitely a learning process for sure. Thanks for the reply
Please I have an ingersoll rand compressor,I have changed all the filters but some times during operation oil gushes out of the air filter?what could be the problem
is there a video of, actually showing, how to do any of these things?
in particular, how to take a fluid analysis sample??
Anyone know how to reset the code A.4804?.
Seriously the only information I needed and they don’t tell you wtf
What causes water in the coolant at low hours (200hrs)? Coolant,oil and separator filters was changed. Coolant resembles "rusty water".
The compressor isnt running enough. When the ambient air is pulled into the airend (compression chamber), the temperature of the air drastically increases due to heat of compression. Rotary compressors are designed to run continuously, which causes moisture in the air to stay in vapor form . When they only run for a brief time, the hot air then cools, which allows the water vapors to condense and mix with the oil. You more than likely need a piston compressor instead. If you keep the rotary, change your oil more often.
@@mattfleskes6359 this pair of R7.5i supply the DEF system on a tier 4 tugboat. After troubleshooting, changing the MPCV solved the problem. These are definitely a learning process for sure. Thanks for the reply
For job air comperssers sarvesing is T-30
&screw